Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

URGENT HELP!!!!! Im tired of all this issues. 3rd Z and problems persist!

Thread Tools
 
Search this Thread
 
Old Aug 1, 2005 | 05:20 PM
  #1  
jmcmorante's Avatar
jmcmorante
Thread Starter
Registered User
iTrader: (22)
 
Joined: Aug 2004
Posts: 1,169
Likes: 0
Default URGENT HELP!!!!! Im tired of all this issues. 3rd Z and problems persist!

Well where do I start? I have had all my modifications since December except a CAI swap 4 weeks ago and also an exhaust swap from NIsmo to invidia also for 4 weeks ago. Well after January I started getting an engine light everytime the car was at idle for more than 10 minutes or so and everytime I would have to take it to the dealer and have it reset. Dealer claimes it was the computer thining the car was running lean due to the cats and nitrous lines but it wasnt so they offered to reset it for free eveytime. They claimed it is an emissions code. Well after that in March I had a plenum installed and found that the emission hose under the intake tube wasnt plugged. I thought that was the cause and after that even if I had the car running at idle no lights.

Well today I was waiting for my wife for like 10-12 minutes in a parking lot at idle and when I started going the light came on. So I dont know if its the same thing or what. Engine feels fine except the rough idle that i get occasionally but im concerned. Im sure if it was somehting serious I could feel soemthing wrong but engine revs fine and everything.

I checked th egas cap and it came right off after kess than half a turn so I dont know if it was that I didnt click it or what but im so concerned.

Sorry to bother you guys but this is my 3rd Z and I had issues with all of them except this one till know possibly.

Please let me know, at least tell me if you think its serious! My mods are in my signature.
Reply
Old Aug 1, 2005 | 08:49 PM
  #2  
jmcmorante's Avatar
jmcmorante
Thread Starter
Registered User
iTrader: (22)
 
Joined: Aug 2004
Posts: 1,169
Likes: 0
Default

Well today the bumper was sold and when they removed it we found my CAI AEM filter dangling from th elast tip to the actual CAI tube basiucally 95% off. COuld this have been it?
Reply
Old Aug 14, 2005 | 09:54 PM
  #3  
Bigmikeny21's Avatar
Bigmikeny21
Registered User
 
Joined: May 2005
Posts: 61
Likes: 0
From: Malibu, California
Default

Try resetting your ECU
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Uriyo_
Exterior & Interior
22
Sep 8, 2021 08:46 AM
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM




All times are GMT -8. The time now is 08:54 PM.