HELP ME PLEASE! Car wont rev!
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: San Jose, Cali
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
here is my problem,
the car starts up fine, but the TCS (traction control system) light is on but i didnt press the button to turn it off. also the SLIP light is on as well and im not even moving.
im thinking that the car thinks its slipping so i wont let me rev past 1500rpm.
i have no clue what to do or what happened to the car. its been sunny for the pas few weeks and no water has gotten near the car besides me washing it.
please give me your imput. id rather have you guys help me out before i take to the dealer.
the car starts up fine, but the TCS (traction control system) light is on but i didnt press the button to turn it off. also the SLIP light is on as well and im not even moving.
im thinking that the car thinks its slipping so i wont let me rev past 1500rpm.
i have no clue what to do or what happened to the car. its been sunny for the pas few weeks and no water has gotten near the car besides me washing it.
please give me your imput. id rather have you guys help me out before i take to the dealer.
#2
Got Track!!!!!
![](https://my350z.com/forum/images/ranks/premier.gif)
iTrader: (40)
Join Date: May 2005
Location: Fayetteville, NC
Posts: 3,307
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I have a 05 35th ann 350z , and that has happen to me once. The only time it happen to me I was parked on a downward slope. I started fine but would not rev past 3K ( kind of like the rev limiter kicking in). park it on level ground and start it up, if that doesnt work unhook the bat to reset the ecu. Hope that helps.