Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

sponge clutch?

Thread Tools
 
Search this Thread
 
Old Nov 5, 2008 | 12:48 PM
  #1  
nick2730's Avatar
nick2730
Thread Starter
Registered User
 
Joined: May 2008
Posts: 36
Likes: 0
From: il
Default sponge clutch?

Hi guys im having an interesting issue with my z. 2003 34k miles on it, anyways i know the car had its tranny replaced in 2005. The car does not grind, sometimes it very notchy primarily after its been on for a while but for the first 5 minutes the car shifts and acts fine minus 1st to second which sometimes feels like it gets stuck in first so i usually shift through all gears before i start going .The clutch gets a real spongy feeling like its not holding the power or weak when i push it and shift. The gear notchy doesnt happen till a few minutes later. Anyone know where i should start looking? I just bought some Sythn tranny fluid but i dont want to put it in yet incase i should do something else first. Thanks Nick
Reply
Old Nov 7, 2008 | 01:25 PM
  #2  
xxbrokkxx's Avatar
xxbrokkxx
Registered User
 
Joined: Feb 2007
Posts: 148
Likes: 0
From: Lost Vegas
Default

I would say take it to the dealer have them check it. Once they charge you way to much to fix (might still cost around 100 bucks for diagnostic), take your car to a different "trusted" shop and tell them what needs to be done. If you do have a burt clutch make sure you take it back to the shop after 3 months, as your clutch will need more adjusting. I've heard Z owners that say theirs felt spongy because of the stock rubber clutch line. When its hot it expands and loses pressure. I would suggest to get one after you diagnose the problem because it does give you a stronger clutch throw.

Just my 2 cents.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
sherm
Engine & Drivetrain
15
Apr 11, 2020 05:21 PM
EnjukuRacing
Engine
0
Sep 30, 2015 06:55 AM




All times are GMT -8. The time now is 07:22 AM.