Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Need help

Thread Tools
 
Search this Thread
 
Old 09-12-2014 | 07:58 AM
  #1  
z_god's Avatar
z_god
Thread Starter
New Member
 
Joined: Sep 2014
Posts: 5
Likes: 0
From: USA
Default Need help

I need help with my temp gauge on my dash board. When ever I accelerate the temp goes up. I changed my water pump, thermostat, and radiator. When ever it heats up and hits H my radiator fluid goes to the coolant box.
Then my rad liquid starts to sneeze out from the cap. All hoses are tight and new. So no liquid should be spilling. The only time the radiator liquid goes to the coolant box is when it over heats.
Can anyone help me on this plz?
I have an 03 DE z33.

Last edited by z_god; 09-12-2014 at 08:00 AM.
Old 09-12-2014 | 08:08 AM
  #2  
travlee's Avatar
travlee
Master
Premier Member
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,128
Likes: 9,166
From: Texas
Default

have you replaced the cap?
Old 09-12-2014 | 09:52 PM
  #3  
z_god's Avatar
z_god
Thread Starter
New Member
 
Joined: Sep 2014
Posts: 5
Likes: 0
From: USA
Default

Originally Posted by travlee
have you replaced the cap?
Yup, also we drained it atleast 3 times and continue to have the same issue.
Old 09-13-2014 | 04:39 AM
  #4  
dcains's Avatar
dcains
Registered User
iTrader: (15)
 
Joined: Aug 2009
Posts: 5,126
Likes: 435
From: Lutz, FL
Default

You're not properly bleeding the air out of the system. You should have searched for this answer, but here's the thread to read:

https://my350z.com/forum/forced-indu...nightmare.html

Read the whole thread, and get one of the funnels mentioned.
Old 09-13-2014 | 11:38 AM
  #5  
bealljk's Avatar
bealljk
350Z-holic
iTrader: (13)
 
Joined: Apr 2010
Posts: 6,409
Likes: 1,304
From: North Denver
Default

+1 to the improper bleed...




All times are GMT -8. The time now is 04:18 AM.