Mag Blue Volks + San Marino Blue Z. Finally!
#34
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Mission Viejo, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Wow thanks for all the awesome feedback guys (and gals) - glad that everyone likes!
asianracerchick: Contact any of the reputable vendors on this forum (such as Andy @ Performance) and they can get you pricing no problem. Pricing for the special offset I believe should run the same price (don't quote me on this) as long as the widths of the actual wheels is the same. Mag blue is usually a special order color though and that might be a bit more.
As for differences between the standard offset and this set - the disk is different for the front, but still retains big brake clearance. If you compare most of the GT-S pix of the front wheels on the forum you will notice a higher disk up front.
asianracerchick: Contact any of the reputable vendors on this forum (such as Andy @ Performance) and they can get you pricing no problem. Pricing for the special offset I believe should run the same price (don't quote me on this) as long as the widths of the actual wheels is the same. Mag blue is usually a special order color though and that might be a bit more.
As for differences between the standard offset and this set - the disk is different for the front, but still retains big brake clearance. If you compare most of the GT-S pix of the front wheels on the forum you will notice a higher disk up front.
#35
New Member
iTrader: (58)
Rear wheel's lip on Volk GTS's have a max of 5 inch's regardless of lower offset so it doesn't look any different but, his front wheel +4 offset A has .5 inches more lip than the the +17 offset A, little more lip in front, sometimes hard to notice.
once again man.. looking real good! can't stop staring haha
also jw: can you give us a rear profile shot? from the looks of it i wouldnt even be able to tell you were running -3.7 rear camber!
once again man.. looking real good! can't stop staring haha
also jw: can you give us a rear profile shot? from the looks of it i wouldnt even be able to tell you were running -3.7 rear camber!
Last edited by Voboy; 09-26-2008 at 01:24 PM.