MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

Notices
Media Share Z Related Photos and Video

sportlines, springmount, GT wheels, spacers, michelins

Thread Tools
 
Search this Thread
 
Old Jan 29, 2009 | 10:09 AM
Share
  #1  
militia's Avatar
militia
Thread Starter
Registered User
 
Joined: May 2007
Posts: 1,190
Likes: 0
From: _
Default sportlines, springmount, GT wheels, spacers, michelins
here are some pics of my 07 with some eibach sportlines, eibach 20mm spacers front & rear, the rear "springmount mod", rays GT wheels and michelin ps2"s 255/40/18 - 285/35/19

I wanted to post so people would know that it IS possible to install 20mm spacers if your lowered and have these wheels (or the nismo wheels comparable to these) but I did have to cut/sand/seal my rear fenders.
Attached Thumbnails sportlines, springmount, GT wheels, spacers, michelins-wat.jpg   sportlines, springmount, GT wheels, spacers, michelins-spacers1.jpg   sportlines, springmount, GT wheels, spacers, michelins-spacers2.jpg   sportlines, springmount, GT wheels, spacers, michelins-spacers3.jpg   sportlines, springmount, GT wheels, spacers, michelins-spacers4.jpg  

Last edited by militia; Jan 29, 2009 at 11:00 AM.
Reply
0
Old Jan 29, 2009 | 10:13 AM
Share
  #2  
350zDex's Avatar
350zDex
Registered User
iTrader: (12)
 
Joined: Sep 2007
Posts: 2,167
Likes: 0
From: San Antonio,Tx
Default
Veryyyyyy sexy flushnessss i love the stock gt wheels , z looks great man!!!
Reply
0
Old Jan 29, 2009 | 11:00 AM
Share
  #3  
XM 1's Avatar
XM 1
New Member
iTrader: (5)
 
Joined: Oct 2005
Posts: 1,535
Likes: 33
From: Germany
Default
approved lookin good
Reply
0
Old Jan 29, 2009 | 11:46 AM
Share
  #4  
militia's Avatar
militia
Thread Starter
Registered User
 
Joined: May 2007
Posts: 1,190
Likes: 0
From: _
Default
ill have more / better quality pics this weekend taken with anna's (z_lover) nikon
Last edited by militia; Jan 29, 2009 at 11:50 AM.
Reply
0
Old Jan 29, 2009 | 11:52 AM
Share
  #5  
RedBullRR's Avatar
RedBullRR
New Member
iTrader: (7)
 
Joined: Mar 2007
Posts: 3,215
Likes: 9
From: New York
Default
Looks Real Nice with the spacers and tire setup.
Reply
0
Old Jan 29, 2009 | 01:09 PM
Share
  #6  
yeayeachriscoop's Avatar
yeayeachriscoop
Registered User
iTrader: (1)
 
Joined: Apr 2008
Posts: 74
Likes: 0
From: H town
Default
noob question:
whats the rear springmount mod.?
Reply
0
Old Jan 29, 2009 | 01:23 PM
Share
  #7  
3000ways2break's Avatar
3000ways2break
Registered User
iTrader: (7)
 
Joined: Nov 2006
Posts: 27
Likes: 0
From: Virginia Beach
Default
I have the same set-up with 30mm spacers, and I love it! Super low-offsets FTW!
Reply
0

Trending Topics

Old Jan 29, 2009 | 01:24 PM
Share
  #8  
killa.beez33's Avatar
killa.beez33
Registered User
iTrader: (6)
 
Joined: Jun 2008
Posts: 2,783
Likes: 0
From: SoCal
Default
looks great,

How much do the sportlines lower the car?
Last edited by killa.beez33; Jan 29, 2009 at 01:31 PM.
Reply
0
Old Jan 29, 2009 | 01:24 PM
Share
  #9  
3000ways2break's Avatar
3000ways2break
Registered User
iTrader: (7)
 
Joined: Nov 2006
Posts: 27
Likes: 0
From: Virginia Beach
Default
OH, and fender rolling with a slight pull and negative camber worked out fine for me, no cutting required.
Reply
0
Old Jan 29, 2009 | 01:30 PM
Share
  #10  
pchong154's Avatar
pchong154
Registered User
iTrader: (1)
 
Joined: Jun 2006
Posts: 319
Likes: 0
From: MD
Default
Originally Posted by yeayeachriscoop
noob question:
whats the rear springmount mod.?
On the rear springs, there's like a black rubber mount and the mod is where u hack off like an inch or however much you want, which essentially lowers your car. Search for more details.


To the OP, car has a very nice stance and wheels are sitting flush as can be.
Reply
0
Old Jan 29, 2009 | 01:42 PM
Share
  #11  
militia's Avatar
militia
Thread Starter
Registered User
 
Joined: May 2007
Posts: 1,190
Likes: 0
From: _
Default
Originally Posted by 3000ways2break
OH, and fender rolling with a slight pull and negative camber worked out fine for me, no cutting required.
yeah, I had the reciprocating saw laying around... so I opted to cut and seal versus rolling the fenders
Reply
0
Old Jan 29, 2009 | 02:36 PM
Share
  #12  
zSupreme7's Avatar
zSupreme7
Banned
iTrader: (8)
 
Joined: Feb 2008
Posts: 446
Likes: 0
From: USDM
Default
Great work!
Reply
0
Old Jan 29, 2009 | 03:00 PM
Share
  #13  
yusoslo's Avatar
yusoslo
Registered User
iTrader: (4)
 
Joined: Jan 2007
Posts: 2,153
Likes: 0
From: Pig Heaven VA
Default
looks great, but my sportlines tuck evenly front and rear, but I am running 19's front and back. is the spring mount mod needed with this 18/19 setup from the GT wheels?
Reply
0
Old Jan 29, 2009 | 03:55 PM
Share
  #14  
GT47R's Avatar
GT47R
Registered User
iTrader: (14)
 
Joined: Jun 2006
Posts: 2,974
Likes: 0
From: Miami
Default
Hella Flush!! badass!
Reply
0
Old Jan 29, 2009 | 04:08 PM
Share
  #15  
militia's Avatar
militia
Thread Starter
Registered User
 
Joined: May 2007
Posts: 1,190
Likes: 0
From: _
Default
Originally Posted by yusoslo
looks great, but my sportlines tuck evenly front and rear, but I am running 19's front and back. is the spring mount mod needed with this 18/19 setup from the GT wheels?
nah its not neccessary, I actually did the springmount mod before I had my lowering springs
Reply
0
Old Jan 29, 2009 | 04:16 PM
Share
  #16  
Ilike350Z's Avatar
Ilike350Z
Registered User
iTrader: (2)
 
Joined: Mar 2005
Posts: 623
Likes: 0
From: VA
Default
awesome great job man. it would'va been perfect if the front were 19's
Last edited by Ilike350Z; Jan 29, 2009 at 04:20 PM.
Reply
0
Old Jan 29, 2009 | 06:57 PM
Share
  #17  
Get_Zwole's Avatar
Get_Zwole
New Member
15 Year Member
iTrader: (34)
 
Joined: Mar 2007
Posts: 7,908
Likes: 0
From: oklahoma city
Default
looks like it should have came from the factory . I love it man if mine came with GT wheels i would have done the same.
Reply
0
Old Jun 11, 2011 | 10:50 PM
Share
  #18  
SDmattZ's Avatar
SDmattZ
Registered User
 
Joined: Jun 2009
Posts: 41
Likes: 0
From: San Diego, CA
Default Measurements
First off props I love the stance of your car. I have the same wheels on my red one and want the same spacing/tires..

Did you have to get different studs to install with the stock wheel?

Do you have a picture of the car straight on from the side?

Can you tell me how high the side of the car is of the ground?

Thanks!!
Reply
0
Old Jun 12, 2011 | 12:50 AM
Share
  #19  
VQpoweredZ's Avatar
VQpoweredZ
Registered User
iTrader: (18)
 
Joined: Aug 2006
Posts: 2,245
Likes: 0
From: Pennsylvania
Default
Holy thread bump batman!
Reply
0
Old Jun 12, 2011 | 07:41 AM
Share
  #20  
Bumble Z's Avatar
Bumble Z
Registered User
 
Joined: Apr 2009
Posts: 583
Likes: 0
From: lehigh acres
Default
very nice stance n stockers look great
Reply
0



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -8. The time now is 01:15 AM.