well, that would depend on what your goal is. do you want to be meaty flush, stretched flush, slammed and not flush?

18x8 +30 is pretty sunken in there.

 

^very sunken in. skinnier than stock and close to factory offset i believe.

 

it's factory offset for front. Not to slammed but not having any wheel cap. I will be fender rolling and I love wide tires but no meaty sidewall. Stagger please...also no stretched flush. I don't want to hear any scrape in the bottom. Too low for me. I want similar to Duckeee style with my offset

 

^225-235 40 18 fronts and 265 40 18 rears?

dirty butt

 

sooooooooooooo beautiful^^^^ I've fall in love with your ride lol. I save all the pictures you posted and show my buddys on facebook. They loved it, especially your Top secret diffuser. I might just end up with 245/40/18 and 275/40/18 rear. Sound good?

P.S with the 30 offset for front and you mention sunken in...will that look ugly when I put the MB wheels battle on?

This is how I want mine to be. Any idea on this tires fitment. I think this is different offset then mine but I hope it will come close to it.

 

its going to be pretty hard to get to that with a 18x8 +30...

 

well a little bit close to it as possible lol. 18x8 30 in front so I'm not to worry about it. I'm more worrying the back since I know it could be lower to that point.

 

rimtuck.com will help you out zhinobi. that red Z on cr kais is on there as well.

hes on 18x9.5 all around -13 front and -18 rear on 225 40's all around.

in order to achieve that look you'll need coilovers that go pretty low, roll and pull all your fenders, and get like a 30mm spacer all around. its a long shot if you have none of the above.

i suggest buying different wheels with better offsets, and researching a lot.

https://my350z.com/forum/wheels-and-...s-welcome.html

^ that thread is your friend. please, spend a few weeks looking through it. you'll learn best doing research yourself and you won't get flamed.

 

To late Duckeee...I already brought the wheels...damn so I can't get away with that. well I'm going to stick with 245/35 and 275/40 and we will work it out from there. Thanks for the help bro's

Messing around on rimtuck atm*

 

id suggest at least a 20mm spacer for the fronts then. good luck sir. and boston roads are pretty bad i must say. i used to live in worcester for a 5 years.

 

well I'll keep you update on my car with picture when I put the wheels on and then will see what size spacers needed. I hear mix message from people with either 10m or 15m and now you telling me 20m. I will do my best with every bumps I come across.

Hey, I went to rimtuck and did the info. but nothing pop up for my fitment. Maybe you could help me. I put down all the numbers but nothing pop up in data or thumbnail

 

not RIGHT now.. but a week ago :P 18x9.75 +20 +15 275/35 all around.

 

its up to you how aggressive you want to go but if you're using that red Z as reference in regards to how you want your car to look, 10-15mm spacer on a 18x8 +30 won't do much justice.

rimtuck is not a calculator. its just a database with pictures of fitment with wheel and tire sizes included.

simply go search for nissan 350z and click thumbnails.

 

are you on stock suspension?

 

Just a little reference and to droool on but I know my offset is no where close to it so it won't turn out to be like that. Oh ok, Gotcha now about the site.

 

gf210 w.tokico blues and camber arms.

 

I swear after looking at RIMTUCK! my wheel offset is weak!!! I kind of regret it now but I already brought it. I love Duckees setup and the red Z but now I can't get those cause of my dumbass offset.

P.S it's weak, because nobody on rimtuck have my offsets cry* fml

 

sell em on craigslist. +30 18x8 wont get you any where near what you are looking for.

This is what your going to be getting with that setup

https://fbcdn-sphotos-a.akamaihd.net...35983886_n.jpg

didnt want to mess this page up with a horrible offset pic.

 

thought this was a nice pic from my iphone

 

^so clean!!!