Today we had a customer stop by the shop in his 35R equipped FD RX-7 for a Forged Performance Custom Tune using an AEM EMS. Sharif has a ton of experience with the AEM, and was extremely pleased that the owner selected this EMS. The owner of this notorious mid 90's sports car had not been able to go over half throttle since the fresh OEM rebuild and turbo kit install. He desperately needed a proper tune for drive-ability and also wanted to get more power out of his build. The customer will return with his car at a later date for a tune at a higher boost level but Sharif was able to lay down an impressive 322whp at only 12 PSI on our Dyno Dynamics.

As some of you may know, tuning rotary engines is completely different from tuning traditional engines. Rotary's are completely intolerant of even small amounts of knock so getting good safe power takes quite a bit of care and understanding of how the Rotary engines operate. Because this customer is a DIY'er, Sharif spent some time showing him some additional features of the AEM, and gave him some additional suggestions such as allowing the AEM to control boost, and integrating his AEM wideband into the EMS. Hopefully he'll be returning shortly for a 16-18psi tune and 400whp+.

 

i would definitely give my left nut for one of these

 

I am a huge FD fan myself and totally understand Jermy's point of view.

 

+3 i miss my FC now...

 

yummmm eff deeeeee

 

good to know Forged can accommodate the rotary crowd as well

 

Thanks guys for all the comments. It is a gorgeous car.