Transformation of my Z
Very good choice of parts. All very clean and subtle yet aggressive.
I like the gloss roof best. I just did mine (vinyl) and it flows nicely with a tinted rear window and keeps from overdoing the car with carbon fiber everywhere.
Oh and those are my favorite Volks too. GT-S FTW!
Now you need to go FI and tuck an intercooler in that mouth.
I like the gloss roof best. I just did mine (vinyl) and it flows nicely with a tinted rear window and keeps from overdoing the car with carbon fiber everywhere.
Oh and those are my favorite Volks too. GT-S FTW!
Now you need to go FI and tuck an intercooler in that mouth.
Looks great! If it were my car, I'd throw some Craftsquare mirrors on and paint the roof gloss black then call it a day exterior wise.
I've heard the double hump cf roof doesn't fit so hot on more than one occasion, so I would stay away from that. You're paying enough in shipping/customs as is, no need to pay more on top of that just to get the piece to fit ok.
I've heard the double hump cf roof doesn't fit so hot on more than one occasion, so I would stay away from that. You're paying enough in shipping/customs as is, no need to pay more on top of that just to get the piece to fit ok.
Theres an Asuka double hump for sale on ebay right now.. 500 bucks, not sure what shipping and customs would hit you at, but it is sick.
Thanks for your comments guys, really appreciated them.
For the Asuka double hump roof, actually I'm not a fan of that part. So I'll just paint the roof glossy black. GT- wing and CF craft square side mirrors will be next.
@350z-900whp, I deal with many vendors all over the forum, ie, vividracing, CZP, MVP, GTM.. Etc
Here's my mods list, hope it'll answer some questions:
Exterior:
- Amuse front bumper and CF diffuser
- Chargespeed BottomLine CF Side Skirts
- ChargeSpeed rear bumper + CF insert + Chargespeed FRP Eyelids
- Painted SEIBON CF TS Hood
- Blitz VIII Spoiler
- Suzuki Swift Short Antenna
- TopSecret Styel AeroCatch Hood Lockers
- Painted Headlights
- Smoked out Tailllights and Signal Blinkers.
Tires & Wheels:
- 19'' VOLK RACING Rims 9.5 +20 - 10.5 +15
- H&R 10mm F, 15mm rear
- VOLK RACING Lugnuts
- Nitto Invo Front Tires 255/35 - Michelin Pilot Super Spoer 275/35
Suspension and Braking:
- Rotora 6/4 floating slotted 14'' BBK
- TEIN Super Street Coilovers + EDFC Controller
- Hotchiks Swaybars
- SPC Rear Camber Kit
- GTspec Under + Fender Braces
Intake & Exhaust:
- Heat Wrapped Stillen Ceramic Coated Headers
- Heat Wrapped Motordyne ART Pipes
- GReddy Ti-C True Dual Turbo Exhaust
- Stellin Gen3 Ultra Long Intakes
Cooling:
- Stillen Tranny Oil Cooler
- GTM Engine Oil Cooler
Drivetrain:
- 3.5 Final Drive
- TransGo kit
interior & Exterior Electronics:
- Kenwood Headunit + Rear View Camera
- Auto-Innevatio Paddle Shifters
- Show & Go License Plate (soon)
ECU:
- Osiris Reflash
For the Asuka double hump roof, actually I'm not a fan of that part. So I'll just paint the roof glossy black. GT- wing and CF craft square side mirrors will be next.
@350z-900whp, I deal with many vendors all over the forum, ie, vividracing, CZP, MVP, GTM.. Etc
Here's my mods list, hope it'll answer some questions:
Exterior:
- Amuse front bumper and CF diffuser
- Chargespeed BottomLine CF Side Skirts
- ChargeSpeed rear bumper + CF insert + Chargespeed FRP Eyelids
- Painted SEIBON CF TS Hood
- Blitz VIII Spoiler
- Suzuki Swift Short Antenna
- TopSecret Styel AeroCatch Hood Lockers
- Painted Headlights
- Smoked out Tailllights and Signal Blinkers.
Tires & Wheels:
- 19'' VOLK RACING Rims 9.5 +20 - 10.5 +15
- H&R 10mm F, 15mm rear
- VOLK RACING Lugnuts
- Nitto Invo Front Tires 255/35 - Michelin Pilot Super Spoer 275/35
Suspension and Braking:
- Rotora 6/4 floating slotted 14'' BBK
- TEIN Super Street Coilovers + EDFC Controller
- Hotchiks Swaybars
- SPC Rear Camber Kit
- GTspec Under + Fender Braces
Intake & Exhaust:
- Heat Wrapped Stillen Ceramic Coated Headers
- Heat Wrapped Motordyne ART Pipes
- GReddy Ti-C True Dual Turbo Exhaust
- Stellin Gen3 Ultra Long Intakes
Cooling:
- Stillen Tranny Oil Cooler
- GTM Engine Oil Cooler
Drivetrain:
- 3.5 Final Drive
- TransGo kit
interior & Exterior Electronics:
- Kenwood Headunit + Rear View Camera
- Auto-Innevatio Paddle Shifters
- Show & Go License Plate (soon)
ECU:
- Osiris Reflash
thanks for the compliment guys
@Bmurray350z, still need to fine tune it then will share the WHP numbers after i dyno it
@gmb1t, not a fan of that spoiler. ill proudly join the SBC peeps soon
some more clear pictures of the smoked taillights + signal blinkers, the CS side add-on, deleted wiper and shaved/debadged rear end




the rear tires are 275's, i dunno why the look like 245

some of you remembered i made a poll regarding what to use for the rear end, and i remember that the MG TS diffuser won the poll. but unfortunately it didnt fit with my true dual Greddy Ti-C. i assume that the mufflers sit lil bit low than what they suppose to. lets see how the bodyshop will sort out this issue.
@Bmurray350z, still need to fine tune it then will share the WHP numbers after i dyno it

@gmb1t, not a fan of that spoiler. ill proudly join the SBC peeps soon

some more clear pictures of the smoked taillights + signal blinkers, the CS side add-on, deleted wiper and shaved/debadged rear end




the rear tires are 275's, i dunno why the look like 245


some of you remembered i made a poll regarding what to use for the rear end, and i remember that the MG TS diffuser won the poll. but unfortunately it didnt fit with my true dual Greddy Ti-C. i assume that the mufflers sit lil bit low than what they suppose to. lets see how the bodyshop will sort out this issue.
UPDATE:
I haven't post here for long time.
As an update, i have changed my front bumper to nismo V2 from extreme dimentions.
And I'm extremely happy about their quality and fitment, as I was facing poor fitment and big gaps with the shine auto Amuse bumper when attaching the splitter to it. And I'm really **** when it comes to details. I got my nismo bumper shipped along with another nismo bumper for a friend of mine, and again quality is top notch.
Extreme Dimentions FTMFW







I haven't post here for long time.
As an update, i have changed my front bumper to nismo V2 from extreme dimentions.
And I'm extremely happy about their quality and fitment, as I was facing poor fitment and big gaps with the shine auto Amuse bumper when attaching the splitter to it. And I'm really **** when it comes to details. I got my nismo bumper shipped along with another nismo bumper for a friend of mine, and again quality is top notch.
Extreme Dimentions FTMFW
















