Sparkle's car driving up The Dragon - and being towed back down
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
Bobby at CIN Motorsports gets all off the credit for the troubleshooting. I can't imagine how long out should have taken me to find that on my own.
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
First Molding Rear Diffuser, Carbon
You can pick it up from Bulletproof (Great Guys A+++):
http://www.bulletproofautomotive.com...il.php?ID=6331
Direct import from Japan, Special order only.
New carbon rear diffuser by First Molding, an instant classic! Fits stock exhaust and after market exhausts. First Molding produces all part in Japan and they are a true in house manufacturer, producing parts for many of the top Japanese tuning brands, as well as their own original First Molding brand parts like this diffuser.
You can pick it up from Bulletproof (Great Guys A+++):
http://www.bulletproofautomotive.com...il.php?ID=6331
Direct import from Japan, Special order only.
New carbon rear diffuser by First Molding, an instant classic! Fits stock exhaust and after market exhausts. First Molding produces all part in Japan and they are a true in house manufacturer, producing parts for many of the top Japanese tuning brands, as well as their own original First Molding brand parts like this diffuser.
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
I want to keep the body line flowing like I did at the windshield/a-pillar and the windshield/roof, so I'm pretty sure that I'll trim it from point to point like I had my trial run in this pic:
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
Thanks, guys. It's really rewarding for a car to really feel like it's "mine" again. I was genuinely worried when I lost the roadster and bought the coupe that it would always feel like it was Erk's old car and not "my car". But these few months with her have really been great.
I also have to thank the guys at CIN Motorsports, ErktheJerk, Justin@Redline, Bulletproof, LightningGuy, Vikram, Taywan, TimShady, the admin/mod team, and a ton of other folks on here for helping me out with the transition. I couldn't have done all of this without a great team of friends behind me.
I also have to thank the guys at CIN Motorsports, ErktheJerk, Justin@Redline, Bulletproof, LightningGuy, Vikram, Taywan, TimShady, the admin/mod team, and a ton of other folks on here for helping me out with the transition. I couldn't have done all of this without a great team of friends behind me.
Last edited by SparkleCityHop; May 29, 2012 at 07:27 PM.
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
Chris came over to the house and we raised his idle the other night. One of these days I'm going to have a garage where we can all tinker with our cars and hang out. Right now, CIN Motorsports is my hang out in Charlotte - but I can't make it up there every weekend.
If all is well, I'll head to Charlotte on Saturday to pick her up. Then it's on like donkey kong.
If all is well, I'll head to Charlotte on Saturday to pick her up. Then it's on like donkey kong.
Last edited by SparkleCityHop; May 29, 2012 at 07:32 PM.
Thread Starter
Joined: May 2009
Posts: 4,293
Likes: 2
From: Spartanburg(SparkleCity), SC
Oh freaking YES!!!
Bobby at CIN Motorsports called, and SHE's ALIVE!!!!
They had to track down some things that it had popped when the harness was cut and it shorted against the engine, so I'm super glad that I had the pros on my side for this issue. I'm so excited.
BIG, BIG, BIG shout out to all of the guys at CIN!!!
Bobby at CIN Motorsports called, and SHE's ALIVE!!!!
They had to track down some things that it had popped when the harness was cut and it shorted against the engine, so I'm super glad that I had the pros on my side for this issue. I'm so excited.
BIG, BIG, BIG shout out to all of the guys at CIN!!!
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM








Glad you've got the issue identified. Good luck; let us know the results.
