Welcome back to Z ownership! That Z looks very nice and well taken care of by the previous owner.

 

thxs.

So no boost on this guy? you want all motor for cause of reliability?

 

Fenders rolled by the best fender modifier in Georgia, Dylan@Forged:






Shorty antenna added:




Removed the 350Z emblem and the dealership decals:





I would consider doing a Momentum ST kit if I can find one during the winter. The Z is prone to overheat when driven hard for long periods of time and spacing the turbo far away from the engine smart for anybody with plans of tracking.

 

^ ah thxs for the info and nice lil update.

 

After work I installed a NISMO Exhaust I got from a friend It really isn't much louder than the stock exhaust but it looks nice lol

 

Congrats Chad. Welcome back buddy.

 

This is the path to right righteousness...super clean mods so far!

 

Bought a Sparco Harness Bar today....this will most likely be installed this fall when I do my interior.





Thanks Kevin!

 

Coilovers ordered!

 

I'm looking forward to your new build

 

What coilovers did you get

 

I definitely liked your write up, added a story to the pictures.

 

Niiiiice photos man!

 

Thanks.
They are being built now and will be here in about 2 weeks
Thank you.
Thank you, I'll take some real shots soon.

 

u decide on what BBK ur going with?

 

I have been slack on the updates, just been busy but I have been making progress.

I got an intake, plenum spacer and test pipes. I'm going to have the polished intake tube and my OEM intake plenum powdercoated wrinkle black so when that stuff is done I'll install the rest of my bolt-on's.

The spring rates I ordered with my coilovers were backordered so I had to go a little stiffer, from 850 front to 900 and from 550 rear to 575....but they will be here next week...I'll post pics

 

Got a surprise today when I walked into work

JRZ went ahead and shipped my coilovers! The new spring rates will be here Monday too!

A HUUUGE thank you goes out to my friends over at JRZ Suspension Engineering for building such a high quality product. Everyone should really check out their FB page and give them a like if you enjoy because racecar type stuff!

 

Chad whats the going rate for a setup like that?

 

Here is some information on them:

"The RS street dampers have been developed from many years of professional racing experience. The RS damper allows for external adjustment of both the rebound and compression functions of the damper. In addition to the same precise and accurate rebound adjustment as in the single adjustable race damper, the RS are double adjustable. The compression adjustment technology is the same as that of the race version. The RS does not utilize a separate canister. The RS has both the rebound and compression adjustments on the damper itself."

Forged Performance Online Store: JRZ RS Coilovers Nissan 350Z 2003-2008

 

Damn that's a nice setup.