Bmurray's 2008 350z Progress Thread
Thread Starter
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
first time in the 1/4 mile today. best pass was 13.5 @ 104mph. need a new clutch/flywheel soon. and some drag radials. and lots of practice.. but here's a video
That's a respectable time for the amount of mods you have. Its definitely running well and with more practice you should be able to get down a little. But congrats on your first time at the 1/4 mile, i bet you were shaking the first time you pulled up to that line!!!
Thread Starter
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
lol i was alright. i had ran in the 1/8th mile a few times. but this was my first time at the 1/4. and yeah, hopefully all within the next year i will have new clutch/flywheel, 4.08 gears, and some nice drag radials and maybe i can see 12s with enough practice.
Nice progress man!
The dyno in Gboro is the one I go to! Thats where i made 301whp.
Your #'s are different because people mess with the dyno info to make customers happy. When you dyno your car make sure to get runfiles so you can inspect air temp and other stuff.
Mustang dynos are load based and SHOULD read lower then a dynojet. if you make more power on a mustang then a dj then id be very concerned..
If you are interested in testing out some parts lmk.
The dyno in Gboro is the one I go to! Thats where i made 301whp.
Your #'s are different because people mess with the dyno info to make customers happy. When you dyno your car make sure to get runfiles so you can inspect air temp and other stuff.
Mustang dynos are load based and SHOULD read lower then a dynojet. if you make more power on a mustang then a dj then id be very concerned..
If you are interested in testing out some parts lmk.
Thread Starter
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
Nice progress man!
The dyno in Gboro is the one I go to! Thats where i made 301whp.
Your #'s are different because people mess with the dyno info to make customers happy. When you dyno your car make sure to get runfiles so you can inspect air temp and other stuff.
Mustang dynos are load based and SHOULD read lower then a dynojet. if you make more power on a mustang then a dj then id be very concerned..
If you are interested in testing out some parts lmk.
The dyno in Gboro is the one I go to! Thats where i made 301whp.
Your #'s are different because people mess with the dyno info to make customers happy. When you dyno your car make sure to get runfiles so you can inspect air temp and other stuff.
Mustang dynos are load based and SHOULD read lower then a dynojet. if you make more power on a mustang then a dj then id be very concerned..
If you are interested in testing out some parts lmk.
thanks man. and yeah idk. bobby up at cin had the wcf on the mustang dyno set very very low. so basically it wasnt really correcting it much for the temp outside. idk much about all that but basically he saying that he didnt do much if anything that would make the #s higher.
however i have changed exhausts since the 292/264 pull. still a 3" single but the momentum vs the megan racing single theres a little spot in the piping that is flat on the megan, and on the momentum its not flat so maybe a little more airflow that needs to be tweaked on the dyno. i still dont see that losing 7whp and 5ft-lbs of tq. but idc really. and was that your maxima thats on the white board at niced up?
plate sounds familiar though.
thanks man. and yeah idk. bobby up at cin had the wcf on the mustang dyno set very very low. so basically it wasnt really correcting it much for the temp outside. idk much about all that but basically he saying that he didnt do much if anything that would make the #s higher.
however i have changed exhausts since the 292/264 pull. still a 3" single but the momentum vs the megan racing single theres a little spot in the piping that is flat on the megan, and on the momentum its not flat so maybe a little more airflow that needs to be tweaked on the dyno. i still dont see that losing 7whp and 5ft-lbs of tq. but idc really. and was that your maxima thats on the white board at niced up?
dont think ive seen ya? post a pic of your car man.
plate sounds familiar though.
however i have changed exhausts since the 292/264 pull. still a 3" single but the momentum vs the megan racing single theres a little spot in the piping that is flat on the megan, and on the momentum its not flat so maybe a little more airflow that needs to be tweaked on the dyno. i still dont see that losing 7whp and 5ft-lbs of tq. but idc really. and was that your maxima thats on the white board at niced up?
dont think ive seen ya? post a pic of your car man.
plate sounds familiar though.
ohh ok, also gas quality can change power too. I try and have SHELL 93 in when i dyno.
haha yeah thats me on the white board! I'm surprised it still highest fwd n/a. Ill be doing some good changes this year too!
Thread Starter
Joined: May 2011
Posts: 8,075
Likes: 92
From: Burlington, NC
and yeah i thought it said 305whp on the maxima? he was talkin about how your car impressed him a lot. lol. he also said that most people that come from mustang dynos make less on his dynojet for whatever reason

btw, you still work at autozone? everytime i pass by i never see the maxima
yep i always always always run v-power in my car. once in a blue moon i pull through sheetz since its on the way to my house.
and yeah i thought it said 305whp on the maxima? he was talkin about how your car impressed him a lot. lol. he also said that most people that come from mustang dynos make less on his dynojet for whatever reason
btw, you still work at autozone? everytime i pass by i never see the maxima
and yeah i thought it said 305whp on the maxima? he was talkin about how your car impressed him a lot. lol. he also said that most people that come from mustang dynos make less on his dynojet for whatever reason

btw, you still work at autozone? everytime i pass by i never see the maxima
yeah one run was 305 but i use the 301 cuz its a cleaner run. I guess i could say 305 whp if i wanted to lolol.
it must be the mustang dyno correcting the numbers in a way.
yeah im not there a lot, I do my business full time.





so we always go over there for installs and stuff.
