GTR BoostLogic 1300hp kit and Wald wide bodykit.
03-03-2014, 01:24 PM
#1
GTR BoostLogic 1300hp kit and Wald wide bodykit.
Hey guys,
This GTR belongs to my friend's Saad.
After his 880whp EVO built http://forums.evolutionm.net/all-mit...map-power.html he decided to upgrade and go with a GTR and shoot for a four digit number.
The was running an AMS ALPHA 9 kit. It made 670whp pump gas 91oct and 800whp c16 ( dyno run ) on stock engine and tranny tuned by Chris Black @AMS.
He sold the AMS ALPHA 9 kit and went with the BL1300 kit and fully built engine and tranny.
This is his build list :
Built full shortblock 3.8L
Titan stud kits
Ported / polished heads
Ferrea 1+ valves
Kelford 276 cams
Kelford Valve springs kit
ATI Pully damper
T1 engine belt
T1 brake boost Kit
COBB tuner
Turbo kit :
Boost logic 1300hp kit
GTX35 turbos
AMS FMIC
AMS piping kit
HKS exhaust
GearBox :
PPG 1-6
promax black Edition clutch
Full locks
HKS cooler
Fuel system :
AAM full kit 3 pumps
ID 2000cc
Body Kit :
wald wide carbon full body kit
HRE 21" Wheels .
(On the way ):
boost logic intake
inkei 18" wheels and rear AMS 17" kit wheels .
Thats all what I can remember lol
Still the car is not tuned yet as he is waiting for other parts to arrive . He is running base map for now @ 18psi and the car is crazy fast on that boost level .
مركز تحميل الصور
مركز تحميل الصور
مركز تحميل الصور
مركز تحميل الصور
مركز تحميل الصور
مركز تحميل الصور
I hope u guys like it ..
This GTR belongs to my friend's Saad.
After his 880whp EVO built http://forums.evolutionm.net/all-mit...map-power.html he decided to upgrade and go with a GTR and shoot for a four digit number.
The was running an AMS ALPHA 9 kit. It made 670whp pump gas 91oct and 800whp c16 ( dyno run ) on stock engine and tranny tuned by Chris Black @AMS.
He sold the AMS ALPHA 9 kit and went with the BL1300 kit and fully built engine and tranny.
This is his build list :
Built full shortblock 3.8L
Titan stud kits
Ported / polished heads
Ferrea 1+ valves
Kelford 276 cams
Kelford Valve springs kit
ATI Pully damper
T1 engine belt
T1 brake boost Kit
COBB tuner
Turbo kit :
Boost logic 1300hp kit
GTX35 turbos
AMS FMIC
AMS piping kit
HKS exhaust
GearBox :
PPG 1-6
promax black Edition clutch
Full locks
HKS cooler
Fuel system :
AAM full kit 3 pumps
ID 2000cc
Body Kit :
wald wide carbon full body kit
HRE 21" Wheels .
(On the way ):
boost logic intake
inkei 18" wheels and rear AMS 17" kit wheels .
Thats all what I can remember lol
Still the car is not tuned yet as he is waiting for other parts to arrive . He is running base map for now @ 18psi and the car is crazy fast on that boost level .
مركز تحميل الصورمركز تحميل الصورمركز تحميل الصورمركز تحميل الصورمركز تحميل الصورمركز تحميل الصورI hope u guys like it ..
03-04-2014, 05:53 AM
#5
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
The car looks awesome. Does it work for more than a few hours? 
03-04-2014, 07:41 AM
#6
I have some vids of it going against a Yamaha 1000cc and a Ferrari f12 @18psi. Can't post them here 
All I know is that its custom HRE wheels to fit the Wald wide kit. Will ask him to make sure.
I never thought a 1000whp+ built car would drive like a stock, until I rode in that GTR. He has been driving it daily for the last month or so.
All I know is that its custom HRE wheels to fit the Wald wide kit. Will ask him to make sure.
I never thought a 1000whp+ built car would drive like a stock, until I rode in that GTR. He has been driving it daily for the last month or so.
03-04-2014, 08:17 AM
#7
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Good to hear. I would hate to spend that kind of money and not be able to enjoy it.
Thread
Thread Starter
Forum
Replies
Last Post
