were should i purge
were should i purge
i was talking with a friend about were i should purge from? he said go out the top of the hood, but i dont want to drill any holes into any part of the body. i have to holes in the front of the bumper already from the stupid dealership dilling my plate to the bumper, so i was thinking there but not sure. any help would be awesome
You can just route the line up between the hood and the cowell. Shouldnt look bad if you route it nicely.
If you want the looks do it where people can see.
If not, purge it back onto the solenoids or onto your intake manifold or something that wasting the nitrous to clear the lines would actually be less of a waste.
If you want the looks do it where people can see.
If not, purge it back onto the solenoids or onto your intake manifold or something that wasting the nitrous to clear the lines would actually be less of a waste.
I have mine purging strait out the sides from the tires inner fender well, just behind each front tire.
There are already holes in the plastic, on the side near the cabin, and it is easy to route the lines behind the firewall once you remove the plastic cover.
Took me less then 30 minutes to remove the firewall cover, run the lines, and close it back up.
Tricky part was mounting the end of the hoses so they wouldn't blow themselves back into the fender well when I hit the purge, and keeping them aimed where I wanted them.
There are already holes in the plastic, on the side near the cabin, and it is easy to route the lines behind the firewall once you remove the plastic cover.
Took me less then 30 minutes to remove the firewall cover, run the lines, and close it back up.
Tricky part was mounting the end of the hoses so they wouldn't blow themselves back into the fender well when I hit the purge, and keeping them aimed where I wanted them.
Originally Posted by PM-Performance
You can just route the line up between the hood and the cowell. Shouldnt look bad if you route it nicely.
If you want the looks do it where people can see.
If not, purge it back onto the solenoids or onto your intake manifold or something that wasting the nitrous to clear the lines would actually be less of a waste.
If you want the looks do it where people can see.
If not, purge it back onto the solenoids or onto your intake manifold or something that wasting the nitrous to clear the lines would actually be less of a waste.
Trending Topics
Originally Posted by PM-Performance
You can just route the line up between the hood and the cowell. Shouldnt look bad if you route it nicely.
Also another tip. Don't use that flexy line crap they give with the kits. Run a copper tubing or some sort of metal tubing so it will stay in place.
If you want it for show. Run 1/4" line. You will see HUGE plumes!
I have pics of my ITR shooting 20ft plumes from the hood and they were very thick clouds. Wasted a bit of nitrous though. On the good part though a quick tap would clear the line instead of wasting off bottle pressure by keep having to tap to clear the lines.
If you want it for show. Run 1/4" line. You will see HUGE plumes!
I have pics of my ITR shooting 20ft plumes from the hood and they were very thick clouds. Wasted a bit of nitrous though. On the good part though a quick tap would clear the line instead of wasting off bottle pressure by keep having to tap to clear the lines.
Originally Posted by davboy
I have mine pointing straight out under the front of the hood. I like to scare the crap out of people in crosswalks with it.
i never thought about using copper tubing, good idea!!! thanks for all the feedbac so far
