Anybody use this or have anything to say about it? I have the lean shut down switch, but this would be a nice addition.

LC-1 Wideband Air/Fuel Ratio system for Autometer!

Its finally here! A wideband controller that will turn your current Autometer air/fuel ratio gauge into a real wideband gauge. Simple installation, comes with everything you need for a complete installation (wideband controller, wideband o2 sensor, cables, bungs etc..). No laptop needed! This Wideband controller comes pre-programmed to work right out of the box.

NOTE: The digital display in the center is for demo only - the actual Autometer gauge will not have this feature!


http://www.dynotunenitrous.com/store...?idproduct=151

 

I have the lc-1, its a sweet unit. I have the square display and also have it hooked up to my nitrous controller, except that I have to change the output setting on output 1 so that my controller can read it. You have a dynotune lean shut down switch? What are you getting your readings from, are you an <04.5? If you ever want to change the settings of the lc-1, you need to order a usb to serial, since they only send it with a serial cable, and almost all new laptops do not use serial.

 

I have the LC-1, also. My nitrous is kind of messed up at the moment, so I haven't sprayed since I installed the AFR. It works fine when I'm just driving around (N/A), though.

You need the Serial to USB (NOT USB to serial). I ordered a random one from eBay and it works fine. Just make sure they come with drivers or you can find a driver online.

 

My bad, lol. I really hope I bought the right cable then, oh well, they are only like, a dollar on ebay anyways. I don't think anyone would sell a usb to serial anyways nowadays, who would actually need one, lol.

I'll try to take a picture of my lc-1 dynotune gauge next time, I just tell people its a clock, lol.

 

whats up with your nitrous setup whats wrong

 

I must've messed up on the wiring or something while trying to wire up my AFR. My AFR works, but now my nitrous set up doesn't. All I did was extend the wires and relocate the gauges. I'll be taking it to a shop to troubleshoot when I get my car back from the body shop (got sideswiped by some kid who then fled the accident scene).

 

the innovate lc1 is one of the best units out there, love mine