is350 = hawt

 

im gunna go put my rims on my moms lexus and go do a photoshoot ha

 

A friend of a friend owns a shop in CA & deals almost exclusively with Z stuff. He's going to see if he can beat that price for me.

If not, I'll PM our guy here.

Thanks for all the help, btw.

 

soleil, lmk.

 

soleil, thanks for the invite and thank tina for the hospitality

 

thanks for coming over jeff

 

josh, do u know the offsets for the IS?

 

+35 i think is semi aggresive.....

 

Okay, here's the definitive guide to all the wheel offset and fitment questions. Here's the real way to figure out whether your wheels will fit!

These limits are the practical extremes with good alignments. You can buy more fender room with camber or rolling or pulling. In front, you can buy more room with shorter overall tire diameter (<25") The closer you get to these limits, the more likely you will need to stretch a tire to fit the fender side. Drop does not determine what size wheels fit. Put too aggressive a wheel, and one day, you WILL bend your fender when you take the wrong turn with a good bump if you exceed these limits.

Measuring in mm from the face of the hub:
Front fender limit: +65mm
Comments:
| +65 | Stretch tire and/or roll fender. Need fender liner mod. Do not exceed tire diameter of 25"
| +55 | Fender liner mod if going for a wide or tall tire. Do no exceed tire diameter of 25.2"
Front inner suspension upright limit: -155mm
Comments:
Need spacer if this number is exceeded. If close, do not use lip weights on wheels

Rear fender limit: +68mm
Rear fender limit w/ shaved lip: +75
Comments:
Need to stretch tire to a certain degree if very close to these numbers
Rear inner suspension coil lmit: >-190mm
Comments:
Untested, but can probably even exceed -200mm. Watch the brake line.

Equations to figure out wheel lip placement relative to limits:

Outer lip: (Wheel Width * 25.4) / 2 - Wheel Offset
Inner lip: (Wheel Width * 25.4) / 2 + Wheel Offset

Examples:
Front wheel size: 8.5" +45
Fender: 8.5 * 25.4 / 2 - 45 = 62.95 (< 65 - OK)
Suspension: 8.5 * 25.4 / 2 + 45 = 152.95 ( < 155 - OK)
Rear wheel size: 9.5" +55
Fender: 9.5 * 25.4 / 2 - 55 = 65.175 (< 68 - OK)
Suspension: 9.5 * 25.4 / 2 + 55 = 175.65 (< 190 - OK)

 

i stopped reading after the first paragraph, haha. too much math for me

 

sup guys make sure everyone who is gonna bring their car to hooters for the show puts their name on the list. i need to know how many spots i need to block off.

https://my350z.com/forum/nolazcc/410...ml#post6994838

 

 

do we have to put our name on the list just to show up and not be judged. . .?

you might as well go for the new M3 V8. . .that should keep you happy. . .

 

this test to speech is pretty badass, you guys should check it out
http://www.acapela-group.com/text-to...tive-demo.html

 

that speech thing is pretty neat. . .didn't look around much but it must be a new chatroom enhancement item. . .?

 

if you have a 350z and are coming with your car put your name on the list i am blocking off spots for all 350z's that are coming, and remember there are no judges the customers pick their favorite and the one with the most votes wins.

 

Yah I started reading and felt the same jeff lol so I decided to just paste it hahaha

 

So me and a buddy went watch a movie at the palace tonight and we were gonna stop by barnes and noble and see if they were open. Pull up and parking lot is empty accept for like 5-6 clean *** s2ks infront bestbuy doing a photoshoot.....had some really clean s2ks.....

 

yea i am trying to set them up with the next hooters car show they had at least 15 or so at hooters a few weeks back

 

i think alot of those are tony's friends. ive met most of em before. they are all cool guys.