Louisiana Z/Import cookout April 29th *Lakefront*
this is probably a question for lance or bradley. Do you think I can use a 18 x 10.5 on the front with a +30 offset. I'm wondering if I would have clearance issues on the inside fitment.
i got rear ended last night
Hate all this rain. was pretty minor cant really tell there is any damage aside from alot of scratches on the rear bumper and its pushed up on the driver side by the quarter panel.
Hate all this rain. was pretty minor cant really tell there is any damage aside from alot of scratches on the rear bumper and its pushed up on the driver side by the quarter panel.
Originally Posted by DustinZ33
this is probably a question for lance or bradley. Do you think I can use a 18 x 10.5 on the front with a +30 offset. I'm wondering if I would have clearance issues on the inside fitment.
I've search around real quickly, for some other higher offset wide wheels that people are running. I've seen a few 9.5 +30 and I remember a guy running FN's in 17x10 +25 all around. Compared to these the 10.5 +30 will be about 10mm closer to the suspension than the 10 +25. I'm pretty sure they will clear no problem. If worse comes to worse, you may need a very small spacer, 5mm or so but I doubt it.
Thanks Lance. I'm trying to do my research on it as well. I need a offset calculator to help me visualize whats happening. I'm thinking about doing the 10.5 +30 instead of doing the 10.5 +15. I'll do some more research and see what I come up with.
I read this in the 10.5 all around thread. Maybe the 10.5 +30 won't work on the front.
Originally Posted by OffsetZ33
Ive put my 18x10.5 +22 on the front and it cleared - barely... the control arm kinda curves out as it goes up, so I was afraid that a 19 might make it tighter since the wheel itself will be higher up on that arm - hape that makes sense, lol.
Originally Posted by hockiman90
what size tire did you have on those 10.5s up front?
Originally Posted by OffsetZ33
I had a 275/40/18, but I only put it on the front when the car was up in the air... That tire may have rubbed with the car back on the ground (it is my rear, I only wanted to see if it would fit). The wheel/tire did clear the arm though.
