Minnesota Chat Thread
#3783
Registered User
...for those that mainly pay attention to this thread and not the "club" forum...the list for the meet Sunday is growwwwwwwing!!! UPdated through this morning with 5-10 tentatives still to be added!
Attendies!
1. Lance (| 1cleanG |) - '06 G coupe
2. Mike (AlphaIce) - '05 G coupe
3. Janik (WannaBe6MT) - '05 G Sedan
4. Alex (Sportbiketed) - Z
5. Jorge (Takata 18) - 04 TL
6. Matt (Slepybear) - 99 TL
7. Razzi (Razzi) - 99 TL
8. Peng (mysticmotion) - '06 G Coupe
9. Ben (05DGcoupe) - '05 G Coupe
10. Bryce (....) - '04 G Sedan
11. ... (Zolid) - '07 Z Nismo
12. Trav (...) - '05 TL
13. Travis (...) - '01 Acura CL
14. Travis (BlueVQ) - Z
15. Andrew (Andrew350z) - Z
16. ... (Silver03z) - Z
17. Tevi (Soolman32) - G37
18. Kyle (Kyle328is) - 2008 Z4
19. Bryce (tohserus) 06 IX Evo
20. Steve (en4cer) - 03 G
21. ... (datakman) - 03 Z
22. ... (USt2010) - 95 325i
23. Cameron (iStunt) - Mk4 337 GTi
24. Matt (MisdemeanorMatt) - Mk5 GTi
25. Hossam (Hoagie) - 07 G3526.
27.
28.
29.
30.
31.
Attendies!
1. Lance (| 1cleanG |) - '06 G coupe
2. Mike (AlphaIce) - '05 G coupe
3. Janik (WannaBe6MT) - '05 G Sedan
4. Alex (Sportbiketed) - Z
5. Jorge (Takata 18) - 04 TL
6. Matt (Slepybear) - 99 TL
7. Razzi (Razzi) - 99 TL
8. Peng (mysticmotion) - '06 G Coupe
9. Ben (05DGcoupe) - '05 G Coupe
10. Bryce (....) - '04 G Sedan
11. ... (Zolid) - '07 Z Nismo
12. Trav (...) - '05 TL
13. Travis (...) - '01 Acura CL
14. Travis (BlueVQ) - Z
15. Andrew (Andrew350z) - Z
16. ... (Silver03z) - Z
17. Tevi (Soolman32) - G37
18. Kyle (Kyle328is) - 2008 Z4
19. Bryce (tohserus) 06 IX Evo
20. Steve (en4cer) - 03 G
21. ... (datakman) - 03 Z
22. ... (USt2010) - 95 325i
23. Cameron (iStunt) - Mk4 337 GTi
24. Matt (MisdemeanorMatt) - Mk5 GTi
25. Hossam (Hoagie) - 07 G3526.
27.
28.
29.
30.
31.
#3786
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Sunday at DCTC from 8am to 5pm.
#3787
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
gheyness.... Walser Nissan can't align my car because of my Nismo bumper.... wtf
#3792
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
As Alex stated, it can pull forward onto the pads. They claim that the front bumper is too long. They can't even service the Nismo Z then with that kind of excuse.
I called Jeff. Got an appt next week. Should have done that a long time ago. I just thought that the new Hunter machine would be a good option for the Z. Now Walser won't be getting any of my business or referrals.
We usually get to the track at DCTC by 0730 to help out, register, do tech inspections, etc.
I called Jeff. Got an appt next week. Should have done that a long time ago. I just thought that the new Hunter machine would be a good option for the Z. Now Walser won't be getting any of my business or referrals.
We usually get to the track at DCTC by 0730 to help out, register, do tech inspections, etc.
#3793
Registered User
iTrader: (19)
As Alex stated, it can pull forward onto the pads. They claim that the front bumper is too long. They can't even service the Nismo Z then with that kind of excuse.
I called Jeff. Got an appt next week. Should have done that a long time ago. I just thought that the new Hunter machine would be a good option for the Z. Now Walser won't be getting any of my business or referrals.
We usually get to the track at DCTC by 0730 to help out, register, do tech inspections, etc.
I called Jeff. Got an appt next week. Should have done that a long time ago. I just thought that the new Hunter machine would be a good option for the Z. Now Walser won't be getting any of my business or referrals.
We usually get to the track at DCTC by 0730 to help out, register, do tech inspections, etc.
You are better off at a shop like Jeff's or Auto Edge. They will put you to your desired spec vs going by the book's OEM specs
#3794
New Member
iTrader: (3)
the equipment is only as good as the people using it. an alignment is an alignment regardless what machine/technique is used to get you to where you need or want to be.
You are better off at a shop like Jeff's or Auto Edge. They will put you to your desired spec vs going by the book's OEM specs
You are better off at a shop like Jeff's or Auto Edge. They will put you to your desired spec vs going by the book's OEM specs
+1 on Auto Edge i've taken the Z there before great service.
#3795
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Never heard of Auto Edge. Where is that?
#3797
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
lol... you suck. I didn't want a link, just wanted to know the location. You google-monster, you!
That's too far anyway, so I'm going to see Jeff in Bloomington.
That's too far anyway, so I'm going to see Jeff in Bloomington.