FS: BP turbo kit, nismo exhaust and mrev2
BP turbo kit, nismo exhaust and mrev2
Hey guys, I have a few things for sale from my 2006 350z. I put the car back to stock and traded it in. These prices are pretty firm. Local pick up only for the exhaust and turbo kit.
1. BP turbo kit with an upgraded 6266 ball bearing turbo. About 8000 miles on the kit. No shaft play. Comes with the tial wastegate dumped to atmosphere and a HKS BOV. The kit is complete except for the fuel pump. I left it in the car when I traded it in. I am also going to include a AEM air/fuel ratio gauge/sensor, AEM TRU Boost controller/gauge, and a autometer gauge pillar and my stock pillar (because your going to have to wreck your old one installing the wires to the gauges). It comes with 550cc injectors and the HPX MAF. I had to cut the wires pretty short when reinstalling my stock injectors. All you would need is a walbro fuel pump and a custom tune. I made 421 hp and 390 tq on Kaizen's DD dyno when they tuned it. That was with a stock block and 10 psi. i installed and uninstalled the kit myself (thats the best part about this kit). Never any maintainance. I just always changed the oil and drove it! I would like to get $4500 for the everything.
2. Nismo exhaust (mid pipe and muffler). In my opinion, one of the nicest sounding systems for the Z. I do not have the y pipe (most use the factory y-pipe anyway with this exhaust). It is in great condition. $650
3. A modded mrev2 plenum and lower plenum. A machine shop port matched and polished both the upper and lower plenum. Comes with Powerlabs 3/8" spacer. I would like $350 or $300 without the spacer.
Pictures:
1. BP turbo kit with an upgraded 6266 ball bearing turbo. About 8000 miles on the kit. No shaft play. Comes with the tial wastegate dumped to atmosphere and a HKS BOV. The kit is complete except for the fuel pump. I left it in the car when I traded it in. I am also going to include a AEM air/fuel ratio gauge/sensor, AEM TRU Boost controller/gauge, and a autometer gauge pillar and my stock pillar (because your going to have to wreck your old one installing the wires to the gauges). It comes with 550cc injectors and the HPX MAF. I had to cut the wires pretty short when reinstalling my stock injectors. All you would need is a walbro fuel pump and a custom tune. I made 421 hp and 390 tq on Kaizen's DD dyno when they tuned it. That was with a stock block and 10 psi. i installed and uninstalled the kit myself (thats the best part about this kit). Never any maintainance. I just always changed the oil and drove it! I would like to get $4500 for the everything.
2. Nismo exhaust (mid pipe and muffler). In my opinion, one of the nicest sounding systems for the Z. I do not have the y pipe (most use the factory y-pipe anyway with this exhaust). It is in great condition. $650
3. A modded mrev2 plenum and lower plenum. A machine shop port matched and polished both the upper and lower plenum. Comes with Powerlabs 3/8" spacer. I would like $350 or $300 without the spacer.
Pictures:
Thread
Thread Starter
Forum
Replies
Last Post
