what offsets? and a 295 on a 9.5 rim might be a little big won't it. correct size for square is a 265? stretched is 255, bulged is 275?

and a 12 inch tire?dayum, you could go even wider I think on a 12 inch rim, but clearance? no idea...

some idea: 19x12.5 getting a 355/25/19

Tire size: 345/30ZR19
Rim width range: 12.0 - 13.5
Overall Diameter: 27.4

check veilside, or call their US distributor for wheel fitment, I'm sure they have a good idea : )

 

and jusdt to be sure, I have seen those S1's look small because of the shape of the lip and rim center... they could look puny if not sized correctly. those G35's with the S1's always look weird to me.

Rick dogg's car is sick though.

 

talked to Harrypotter this si what he had to say:

as for Wheels...did you for get I have a widebody too?..lol...I have 19x 10 in the front and 19X12.5 in the rear...I'm using Michelin Pilot sport ps2's and the back is a 315/25/19...the 315 on a 12.0 wide wheel is perfectly fine...I know tires like the back of my hand...I'm the tire king now after researching thousands of tires I know every size and what's available and what's not... Tire rack sells them for a good price... he has Iforged with a 7 inch lip in the back!!! yowzers.

 

my kit should be here next week sometime:

DOES ANYONE KNOW A GOOD (not too expensive) SHOP TO GET IT PREPPED< FITTED AND PAINTED??? or any hook ups for that matter.

anyone know what kind of price I should be looking for?

I have full front bumper, sideskirts and rear addons (not bumper) two tone.

 

Tom, prepped and painted I understand. Fitted and NOT installed I don't. Clarify and I will ask my guy what it should cost.

 

I'll see if I can make it Sunday, maybee play hookie if I can.
If one of my guys can cover I'll be there.



Jerry

 

Jerry, Do you have quantity oil yet, what about the filters?

 

I have both!.......and gear oil!
1 case of oil and two filters, Rick did you say you were looking for HFC's?

 

If you come, see if you can bring a case. And a couple of filters. I also need to do an oil change on the G so if you have filters for it that would be great.

Thanks, man...................hope to see you there.

 

theatrix: generally with fiberglass body kits they test fit to make sure they are not twisted, short, wavy, etc. then they drill the holes before paint where they will line up perfectly. then they prep the surface and paint : )

from what I get from TV anyway.... lol. if you could find out that'd be great. I got a est. for a little over 500 or so maybe 600.

edit: Jerry, I sent that PM before reading this thread.

 

I'll try to make it. The only time I've had to work on the website has been over the weekends, and some of the stuff takes a while to get done right.

 

get pumped up you ****ers!!!!! SUNDAY SUNDAY SUNDAY!!!!!!!


anyone have an extra bottle of sivler touch up paint????

 

Everytime you guys have a meet scheduled I have work. Darnit! I have yet to attend but I promise I will eventually.

 

dude, i feel sorry for you, we are getting strippers this time.

 

Did we get the pole mounted in the shop yet?

 

going in as we speak : ) strobes are in and so is the PA system

 

Don't tease me like that!

 

Just spoke to one of the strippers. They still still can't agree on the type of lubricant to bring. I say just bring a goodie bag with it all. Glad I stocked up on batteries!

 

I will make sure to stop at the bank tomorrow and stock up on singles!

 

1. Theatrix (Rick)
2. Stryker (Chase)
3. Stepson (Ernie)
4. Motormouth (tom)
5. HT4 - 80% - (Harry)
6. Kelekonakustoms (Jimmy)
7. Hazade -(Josh) maybe
8. 350z300zxtt - (Parth) should be able to come 90% AND I have the 300zx back, it is great but comparatively reminds me that it is 16 yrs old and needs still a few things to look all shiny like our 350z's BUT it flies and I'm still only running 11lbs boost for the next 500 miles or so. then straight to 20 or 22 and its time for some fun. although already races an audi rs4 and slowly walked him from a 30 roll. on high boost prolly coulda pulled significantly on him. But I will prolly come in the 300zx if i come on sunday, it is still a z and it still makes me elligible! (i forgot who it was that said they would be able to rescue the paint job on my 300zx from all the moisture damage but if you're coming could you please bring whatever cleaning products you told me would do the trick, i will gladly pay you for them, i just dont know what to get or where to get it. thanks.)