ni$mo350

iTrader: (4)

Early morning shoot with Jeff and his STI. It's going for top Scoob on NASIOC right now and wanted some more pics to help get some votes. If it looks familiar, it's because I shot this before a few months back before he had his new front end completed and the dash redone.

I'm starting to incorporate lighting into my auto shots and I'm getting the hang of it but had an issue with one light producing more than the other while both were at full power and I didn't know until the end of the shoot but I still think these came out well.

1)


2)


3)


4)


5)


6)


7)


8)

verdict.

Wow, awesome photos... #6 is by far my fav. That's a nice STI.

ni$mo350

iTrader: (4)

Ohhh and here's the parts list:

POWER/ENGINE BAY



-Turbonetics GT-K 500 rotated turbo (513whp/494wtq on Q16 @26.7psi on a Mustang Dyno, 462whp/460wtq on Q16 @29psi on a Dyno Dynamics Dyno)

-Treadstone 304 stainless steel downpipe with replumbed dump tube

-Treadstone 304 stainless steel up pipe

-Treadstone 3.5" anodized red powder coated cold air intake with black silicone couplers

-K&N 3.5" cone air filter

-Treadstone stealth black 4.5” core FMIC

-Treadstone anodized red powder coated aluminum intercooler piping with black silicone couplers

-Treadstone stainless steel oil catch can with braided stainless steel hoses and A/N fittings

-Treadstone stainless steel heat shield

-Full Blown in tank dual Walbro fuel pump hanger

-Two (2) Walbro 255lph fuel pumps

-Ultimate Racing top feed fuel rail kit with braided stainless steel hoses and A/N fittings

-Ultimate Racing 1260cc top feed fuel injectors

-Tial anodized red 44mm external wastegate

-Tial anodized red Bv 50mm VTA blow off valve

-Gallery anodized red engine bay dress up kit

-Turbosmart anodized red billet aluminum oil cap

-Turbosmart eBoost2 40psi Sleeper Series EBC

-NGK one step colder plugs

-Cusco exhaust manifold header

-Coolingmist CMGS FS methanol injection kit with failsafe

-ZEX direct port N2O (plumbed but not tuned)

-Cobb AccessPORT v2

-Red Line synthetic fluids throughout

-HKS Carbon-TI exhaust

-Go Fast Bits 3 piece lightened pulley kit with belts

-Mishimoto polished aluminum radiator

-Mishimoto black silicone radiator hose set

-GrimmSpeed 160 degree TSTAT

-GrimmSpeed PnP intake manifold with black thermal coating

-GrimmSpeed TGV deletes with black thermal coating

-GrimmSpeed 8mm phenolic thermal spacers

-GrimmSpeed 2.5mm multi-layer stainless steel exhaust gaskets

-Subtle Solutions black alternator cover

-Subtle Solutions black radiator shroud

-Color matched black fluid reservoir covers

-Gruppe-S carbon fiber hood dampers

-Turbo XS coolant overflow tank

-Forge Motorsport polished aluminum power steering tank

-A/C delete

-P-R-E custom fabricated N2O stainless steel bracket with braided stainless steel fuel hoses and A/N fittings

-P-R-E custom fabricated Russell Performance competition fuel filter with braided stainless steel hoses and A/N fittings

-P-R-E custom fabricated polished aluminum coolant reservoir with braided stainless steel hoses and A/N fittings

-P-R-E custom fabricated methanol reservoir

-Killer B Motorsport black powder coated windshield washer reservoir



SUSPENSION/DRIVETRAIN/BRAKES



-Whiteline sport anti-lift kit

-Whiteline steering bushings kit

-Whiteline 27-29mm adjustable front swaybar

-Whiteline 22-26mm adjustable rear swaybar

-Whiteline roll center adjustment kit

-Whiteline rear differential mount bushings kit

-Whiteline front and rear 14mm camber bolt kit

-Hotchkis competition front high articulation ball joint end links

-Hotchkis competition rear high articulation ball joint end links

-Cusco Zero 2R coilovers

-Cusco front strut tower bar

-Cusco rear strut tower bar

-Cusco rear strut tower triangle brace

-Cusco trailing arms

-Cusco lateral links (camber adjustable)

-Cusco engine mounts

-Cusco transmission mount

-Cusco rear subframe brace

-GT Spec front lower tie brace

-GT Spec rear T brace set

-GT Spec 3 piece subframe set

-GT Spec 4 point ladder brace

-GT Spec differential mount bar

-Kartboy tranny crossmember bushings kit

-Kartboy short shifter with front and rear bushings

-Kartboy pitch stop

-Kartboy exhaust hangers

-Kartboy rear subframe outrigger bushings

-Rotora Front & Rear Big Brake Kit consisting of:

6 Piston cast aluminum red front calipers
4 Piston cast aluminum red rear calipers
355x32mm Front e-coated rotors (2 piece cross drilled and slotted)
330x30mm Rear e-coated rotors (2 piece cross drilled and slotted)
Rotora street performance pads
Anodized black caliper mounting brackets
Braided stainless steel brake lines
-ARP longer wheel studs

-ATE Super Blue racing brake fluid

-TIC shift linkage bushings

-TIC 6MT pivot bushings

-Beatrush propeller shaft mounts

-Goodridge braided stainless steel clutch cable

-Custom alignment by PSI with 3.0* camber in front and -2.0* camber in the rear with 4.8* caster and -.11* toe in front and +. 10* toe in the rear



INTERIOR



-Defi amber BF series 60mm boost gauge

-Defi amber BF series 60mm oil temperature gauge

-Defi amber BF series 60mm EGT gauge

-Defi Link Control Unit II

-Carbon fiber 60mm triple gauge hood

-Carbon fiber instrument gauge cluster bezel

-Coolingmist 52mm CMGS FS black face gauge mounted in A pillar pod

-TurboSmart eBoost 2 Sleeper Series 66mm black face gauge custom mounted in A pillar pod

-Autometer dual A pillar pod custom wrapped in Alcantara black suede

-Works Bell Team Orange 350mm leather steering wheel w/autographed hub by Samuel Hubinette and Tanner Foust

-Works Bell Team Orange Rapfix II quick release disconnect

-Works Bell Short Boss hub

-Gentex K31 auto dimming rear view mirror with compass, temp & map lights

-Sparco Torino 2 front seats in red jacquard fabric

-Sparco reupholstered rear seat in red jacquard fabric

-Sparco reupholstered door cards in red jacquard fabric

-Sparco harness bar powder coated in gloss black

-Sparco black 6 point race harnesses

-Sparco red competition harness pads

-Alcantara black suede headliner, pillars and visors with red stitching

-Alcantara black suede upper dash with red stitching

-Alcantara black suede lower dash, upper door cards with "STiyiyi" logo, glove box, armrest and center console with red stitching

-Dyed seatbelt anchors, panic handles, Spec C roof vent trim and dome light trim in matte black

-WRX black carpet

-Black STi floor mats

-Two ZEX "Blackout" 10 lb. N2O bottles custom fabricated in the rear deck

-Two custom fabricated billet aluminum N2O bottle brackets

-JDM red hazard button

-JDM S203/S204 12 piece black trim dash kit

-JDM S203/S204 STi shifter trim with leather boot

-JDM S203/S204 style leather shift **** with cherry red pattern 6MT

-Amerex 2.5 Lb. dry chemical fire extinguisher

-Autospeed dead pedal

-Custom LED footwell lighting



EXTERIOR



-JDM S203/S204 clear side marker lamps

-JDM Spec C roof vent

-JDM rain guards

-20% window tint

-45% windshield tint

-Volk Racing LE28N 18x9.5 wheels +42 in Glossy Black

-Volk Racing Limited Edition Black GT center caps

-H&R 10mm magnesium/aluminum hubcentric front and rear wheel spacers

-Rolled and pulled front fenders

-Cut and pulled rear fenders

-Project Kics R40 Neo-Chrome titanium lug nuts

-Hankook Ventus R-S3 265/35/ZR18 extreme performance summer tires

-NRG carbon fiber roof vane

-NRG carbon fiber flush mounted hood pins

-Hella Supertones (blacked out)

-Seibon CW style carbon fiber hood with blacked out vents color matched in CGM

-Seibon CW style carbon fiber reversed hood scoop accented in CGM

-Seibon carbon fiber trunk lid color matched in CGM

-Carbign Craft carbon fiber rear license plate backing bracket

-Voltex side skirts with blacked out vents

-Voltex Type-5 V-Mount Evo IX 1500mm carbon fiber GT wing

-Voltex carbon fiber rear under tray

-Voltex front bumper with blacked out vents

-Voltex single plane canards

-Voltex front under wing (ordered)

-Ganador carbon fiber motorized Super Aero mirrors

-Varis carbon fiber B pillar garnish

-L'aunsport carbon fiber C pillar garnish

-Custom debadged, pillarless, fiberglassed and painted front grille

-Nukabe red front and rear tow hooks

-LightWerkz custom headlamps consisting of:

Honda S2K projectors
Amber removal
BMW Quad Angel Eyes
BMW E46 replica shrouds
Custom painted inner housings and projectors
7440 Chrome amber bulbs
194 Superwhite LED Bulbs




I.C.E.





-Kenwood Excelon DNX8120 All-in-One Navigation/DVD Entertainment System including:

-In-dash DVD/CD player with 6.95" color touchscreen display

-50 watts x 4 plus Three pairs of Pre Amp Outputs

-New GUI with Changeable Skin and Customizable Start-up

-Built-in Garmin Navigation

-Built-in Bluetooth receiver

-Built-in 5.1 decoding

-Dual-zone controls

-24-bit D/A converter

-13-band EQ with six preset tone curves

-Sound Management System (S.M.S.) with controls for vehicle size, speaker sizes, digital time alignment, and high- and low-pass filters

-Kenwood HD Radio interface

-Kenwood KCA-iP500 iPod control interface

-Two (2) MB Quart RAA 1000 watt mono amplifiers

-Two (2) MB Quart RAA 2400 400 watt x 2 stereo amplifiers

-MB Quart QSD 216 6.5" front component speakers with A pillar relocated tweeters

-MB Quart QSD 213 5.25" rear component speakers relocated in the rear deck

-Two (2) Alpine SWX-1224D 12” subwoofers pressure tested to over 140db

-StreetWires speaker wire, power cables and interconnects

-Nine (9) sheets of Dynamat installed underneath the entire floor, doors and trunk

-Two (2) Kinetik KHC1400 12 Volt High Current Power Cells relocated in the custom trunk enclosure

-Kinetik KIPS12-60 Power Supply power inverter

-Custom black piano finish lacquered MB Quart amplifiers

-Custom fabricated fiberglass trunk enclosure with LED lighting

-Custom LED lighting in engine bay and intercooler

ni$mo350

iTrader: (4)

Thanks

cyrilic

iTrader: (5)

Gorgeous

Vivid Racing

iTrader: (67)

awesome photos and beautiful cars!

O HELLA OEM

iTrader: (7)

nice

edit
whats on the roof?

Josemr2

iTrader: (2)

WOW, what a parts list.......

ni$mo350

iTrader: (4)

Thanks!

Thank you! It's stunning in person.. so much detail..
Thanks, spec C roof vent to let air in the cabin. It's for when Rally cars have plastic windows that can't be rolled down. I took a ride in it with the windows up and the roof vent open and it's pretty effective. It's a Subaru thing though and you either love it or hate it.

I know, he didn't miss a thing minus building the motor which is the plan the next year or so...

The hood on the 17-40L was not on right so it caused a slight vignette on the side of the close up pic and thought it was all around a little too dark so I cropped it and touched it up a bit to brighten it. Here's the new edit..

Highway Riding

iTrader: (6)

wanna trade! lol Sick whip!

Blackheart

iTrader: (21)

Phucking insane

can'tZme

iTrader: (7)

Thats awesome

BoomerZ33

iTrader: (23)

man i had to take a break while reading the entire parts list! This STI is no joke

SlideFox

By far my favorite STI!!

synth19

iTrader: (11)

damn son, you're getting quite good. Love the Roller.

firekrave

Those are full of win. Love the lens distortion of number 1.

NismoZR

iTrader: (38)

Look sick

350zDex

iTrader: (12)

Wow amazing mod list and sti super clean!!

ni$mo350

iTrader: (4)

I haven't been on here in a LONG time (mostly on the Canon photography forum now) but I appreciate everyone's feedback. I've been a bit busy doing senior shoots and weddings recently but as things slow down for the winter I'm going to start shooting more cars.

JDSMotoring

iTrader: (15)

wow now thats a well built machine