quick clip of drive in my car
#1
Registered User
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
just a 3min clip of a nice drive down one of the nicest winding roads in tampa- weather was perfect, just wish traffic wasn't so heavy. (also- a test of what my cheap-o dash cam footage looks like and testing to see if i can load a video here properly - lol...)
The following users liked this post:
dcains (11-30-2016)
#3
Registered User
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
i'll write up a review of this particular camera and post some pictures - when i pull the memory card out again (i only uploaded the front view of that drive- there is a synched matching rear view video-but i forgot to up load it on youtube...
#4
Registered User
Thread Starter
![Default](https://my350z.com/forum/images/icons/icon1.gif)
here are pictures of the temp install---
![](https://cimg7.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_160053_1__f3c9080a59cd15af675743b0144c575fd701eee8.jpg)
shot of mirror/camera from my viewpoint in drivers seat
![](https://cimg0.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_160108_1__94a00453910687943385321d06af74b785271882.jpg)
close up of the 'misfit'
![](https://cimg4.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_160113_1__2f7f7895c22d1b579e9b483fce9e2243bf0fc53b.jpg)
showing the wired connections- the USB/power cord is on the left-the rear camera is on the right- and the micro SD card is just to the right of the camera cord
![](https://cimg7.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_160121_1__170fe664306134faac32303910189ff0fcabecac.jpg)
temp wiring routing- showing the power and the rear camera wires
![](https://cimg3.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_160131_1__a1c68d7770d42e9983b6deb42e35e00facfa2479.jpg)
how i have the rear camera temp mounted below the 3rd brake light as seen from drivers seat
so- for 70 dollars or so- not a shabby camera- does what i am asking of it. yeah- fitment of the camera/mirror combo over the rear view mirror leaves a lot to be desired- partly because of the width- but also- the thickness of the factory mirror- fitting the rubber band connectors was a bit tight.
in addition-i wish they had put the micro SD in a different location- like on the side or the bottom- to get to it- gotta twist the camera connector and tilt the mirror way down (part of that i blame of the gorilla fingers i have)
![](https://cimg2.ibsrv.net/gimg/my350z.com-vbulletin/2000x1124/20161130_163324_1__76b7300e7eea1dbcd856008efa426e8d7a2f0d87.jpg)
Micro SD card vs my gorilla fingers
here is the rear view camera view captured at the same time....
now- i have the camera set up to save every 3 mins. but this video is 5 mins. long. and right at the 3 min mark -sound cuts off-but keeps filming. (don't know what is up with that)
bouncing around- due to two 10 inch kickers mounted under the strut bar in a zenworks box...
dark picture- due to 5% tint
i really want to make this position of mounting the rear camera work because of the wider view of whats happening behind (i'm not using this for backing up- but for filming the florida drivers-lol)
now admittedly- some of the bouncing can also be blamed on how i mounted the camera back there--just wrapped a lil bit of tape around the camera mount for traction and slid it between the 3rd light plastic housing and rear glass- and that 3rd light housing is pretty loose)
the tint/reflections from inside esp.the strut mount bar- might just matte the chrome part....still pondering things
hence the extremely temp set up ..i am also considering putting the camera outside where the rear window sprayer is mounted.
well- in sumnation- i wish they made a 2 camera system with HD on both cameras that had a black box type recorder so that i could just go back to stock mirror- cuz the combo mirror/camera/storage/connector deal is not ideal- but for the 70 dollars- its making for interesting goofing around.
#5
Registered User
iTrader: (15)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Thanks for all the details, but I don't want to swap out the self-dimming Homelink mirror I installed in mine a few years ago, so I guess I'll keep looking for a separate cam.
![](https://photos.smugmug.com/photos/i-RsHJqtf/0/L/i-RsHJqtf-L.jpg)
The good news for your install is that all the wiring you need is in the driver's side A-pillar behind the plastic trim. I don't recall the colors of the wires I used, but there is a plug you can tap into, and it has a ground, 12V+ switched, and 12V+ constant.
![](https://photos.smugmug.com/photos/i-RsHJqtf/0/L/i-RsHJqtf-L.jpg)
The good news for your install is that all the wiring you need is in the driver's side A-pillar behind the plastic trim. I don't recall the colors of the wires I used, but there is a plug you can tap into, and it has a ground, 12V+ switched, and 12V+ constant.