I'm looking at new wheels. I think these would fit in the front but would like to hear your comments.

Front choices:

SSR Type C RS in 19x9.5 +30mm offset

Or

SSR Type C RS in 19x9.5 +45mm offset

To go with the rears:

SSR Type C RS in 19x10.5 +30mm offset

Edit: corrected rear rim width

 

you will want the SSR Type C RS in 19x9.5 +30mm offset

 

Yup, go with the +30 offset. the +45 will definitely rub on the inside.

 

I know it's not a choice you listed, but the Tire Rack still has 18x9.5 +22 (front) and 18x10.5 +25 (rear) available. Personally, I'd rather have 18's than 19's with weak offsets.

 

imo... those a crap offsets period! anything above a +22 looks wrong.

 

That is complete BS.

A +22 with a decent size tire will rub. +25 to a +30 on the rears (assuming they are 10.5") will be plenty fine (and be aggressive) and allow a good size tire to fit without rubbing and without excess camber or fender modifcation.

The +30 up front on a 9.5" wide wheel will also be plenty decent.

I do agree with Lawn Dart that I would run the 18's over the 19's, but SRT-4 is full of ****

 

Thanks guys. I was pretty sure the 19x9.5 +30 would fit, but had to have confirmation.

I run a set of 5Zigen FN01R-C 17x9 +35 Front and 17x10 +35 Rear for the race track.

The newer wheel will be replacing the OEM Track wheels I busted when I hit a wall a mount ago. 2 OEM wheels cost 3,500$ apparently! I'll get a full new set for less than that.

Now it's time to convince the body shop...