Notices
Forced Induction Turbochargers and Superchargers..Got Boost?

15-16psi+Greddy TT+Stock block+113k miles

Thread Tools
 
Search this Thread
 
Old Nov 23, 2008 | 03:10 PM
  #21  
Alberto's Avatar
Alberto
Cranky FI Owner
Premier Member
iTrader: (14)
 
Joined: Mar 2003
Posts: 34,715
Likes: 8
From: DMV
Default

Originally Posted by 500HPZ
The car ran 11.8@118 on 9psi on stock suspension. I went a different route with the cars setup that it wasnt worth drag racing after that.
We went towards road racing/drifting.
At 5800ft, 11's isnt a true time at 9psi. Post ACTUAL times not corrected BS.

Also share 60ft, 1/8 info and tires used. 11.8 @ 118mph sounds like a GTECH time lol...
Reply
Old Nov 23, 2008 | 03:20 PM
  #22  
JAM3Z's Avatar
JAM3Z
Phenom
Premier Member
iTrader: (17)
 
Joined: Aug 2005
Posts: 8,638
Likes: 0
From: Greenville SC
Default

+1. RobertK tried to pass off his corrected numbers as being legit and everyone called him on it.
Reply
Old Nov 23, 2008 | 06:52 PM
  #23  
QuadCam's Avatar
QuadCam
Registered User
iTrader: (8)
 
Joined: Apr 2003
Posts: 3,869
Likes: 4
From: Vero Beach, Florida
Default

at 5800 ft above sea level, you are approx 3 psi less air pressure than at sea level.

you should post your actual numbers....not some corrected number. If you are at 5800ft, you AREN'T making the power that you are posting!!!! there is no sense in posting corrected numbers...... keep the boost set at those levels and then dyno your car at a sea level dyno.....and watch it blow up!!!!!!
Reply
Old Nov 23, 2008 | 06:59 PM
  #24  
thawk408's Avatar
thawk408
Registered User
iTrader: (16)
 
Joined: Mar 2004
Posts: 2,939
Likes: 0
From: Nashville, TN
Default

For high boost try using some race gas instead of pump. Will be safer and allow you to pull some fuel out to lower the duty cycle.
Reply
Old Nov 24, 2008 | 12:13 AM
  #25  
500HPZ's Avatar
500HPZ
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Mar 2007
Posts: 98
Likes: 0
From: USA
Default

Originally Posted by Alberto
At 5800ft, 11's isnt a true time at 9psi. Post ACTUAL times not corrected BS.

Also share 60ft, 1/8 info and tires used. 11.8 @ 118mph sounds like a GTECH time lol...
Alright drag master pro here is the video from GTECH Speedway.
http://www.youtube.com/watch?v=-T0GtF7SZyI
Denver speedway
http://videos.streetfire.net/video/D...ene_188245.htm
I am sure the road race video and drift video is around some where...


I will try and dig up the time slip it was a year ago. I will get you guys the uncorrected numbers no biggie, I wouldnt be surprised if its right around 500whp uncorrected or just shy of that. I also mentioned it was on a dyno jet. I am running RC injectors, I think I also mentioned some where in there that I am running 114octane. Oh burberto I was running the Mickey thompson et-streets, on a 17" wheel.

This funny, because I totally was expecting all the flame from a few on here. Keep on flamin.
Went and abused the **** out of it tonight, guess what I still drove it home in one piece. I will do more next weekend too, hmm maybe I will throw in a set of bigger injectors and turn it up some more, I gotta hang with the sea level gods. Whats the highest hp stock block "uncorrected number" so far?
Reply
Old Nov 24, 2008 | 12:15 AM
  #26  
500HPZ's Avatar
500HPZ
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Mar 2007
Posts: 98
Likes: 0
From: USA
Default

Originally Posted by JAMEZ@CiNcity
+1. RobertK tried to pass off his corrected numbers as being legit and everyone called him on it.


I think one of your guys from cincity moved to denver, maybe he should come by to see for himself? He knows who I am and where my shop is. We could also do a interview if you guys would like? Live feed too?
Reply
Old Nov 24, 2008 | 12:25 AM
  #27  
Dynasty.Zero's Avatar
Dynasty.Zero
Registered User
iTrader: (4)
 
Joined: Oct 2008
Posts: 320
Likes: 0
From: In a Hole
Default

Originally Posted by 500HPZ
Alright drag master pro here is the video from GTECH Speedway.
http://www.youtube.com/watch?v=-T0GtF7SZyI
Denver speedway
http://videos.streetfire.net/video/D...ene_188245.htm
I am sure the road race video and drift video is around some where...


I will try and dig up the time slip it was a year ago. I will get you guys the uncorrected numbers no biggie, I wouldnt be surprised if its right around 500whp uncorrected or just shy of that. I also mentioned it was on a dyno jet. I am running RC injectors, I think I also mentioned some where in there that I am running 114octane. Oh burberto I was running the Mickey thompson et-streets, on a 17" wheel.

This funny, because I totally was expecting all the flame from a few on here. Keep on flamin.
Went and abused the **** out of it tonight, guess what I still drove it home in one piece. I will do more next weekend too, hmm maybe I will throw in a set of bigger injectors and turn it up some more, I gotta hang with the sea level gods. Whats the highest hp stock block "uncorrected number" so far?
Ouch . . . .

Nice build + numbers + races . . . . who gives a fawk about numbers the car is fast and vids prove it.
Reply
Old Nov 24, 2008 | 03:51 AM
  #28  
Alberto's Avatar
Alberto
Cranky FI Owner
Premier Member
iTrader: (14)
 
Joined: Mar 2003
Posts: 34,715
Likes: 8
From: DMV
Default

You stated it ran 11's at 9psi, then in the video it says 500+whp Z? You claim 9psi = mid 400's corrected....

So you ran 11's at 13+psi? That would make sense at that altitude, I dont buy the 9psi running 11's at altitude. BTW-Im not flaming you, Im asking you questions, get the wadded panties out of your cooch...
Reply
Old Nov 24, 2008 | 03:52 AM
  #29  
Zridder19's Avatar
Zridder19
New Member
iTrader: (14)
 
Joined: Nov 2006
Posts: 5,041
Likes: 0
From: Panama City Beach, FL
Default

haha
Reply
Old Nov 24, 2008 | 07:44 AM
  #30  
500HPZ's Avatar
500HPZ
Thread Starter
Vendor - Former Vendor
iTrader: (3)
 
Joined: Mar 2007
Posts: 98
Likes: 0
From: USA
Default

Originally Posted by Alberto
You stated it ran 11's at 9psi, then in the video it says 500+whp Z? You claim 9psi = mid 400's corrected....

So you ran 11's at 13+psi? That would make sense at that altitude, I dont buy the 9psi running 11's at altitude. BTW-Im not flaming you, Im asking you questions, get the wadded panties out of your cooch...
Hahaha, the person who took the video claim of 500whp is wrong, it was more like 470-480ish at that time (tuned aggressively), it was 9psi on the map. I wasnt running a boost controller back when that video was taken, what the previous owner did was upgrade the WGs springs.
Reply
Old Nov 24, 2008 | 02:43 PM
  #31  
zmedic16's Avatar
zmedic16
Registered User
iTrader: (6)
 
Joined: Nov 2006
Posts: 588
Likes: 0
From: bronx new york
Default

lol that was a good stfu for the non believers.
Reply
Old Nov 24, 2008 | 05:05 PM
  #32  
wannabuy350z's Avatar
wannabuy350z
Registered User
iTrader: (27)
 
Joined: Dec 2007
Posts: 1,301
Likes: 2
From: SD SoCal | Jed, KSA
Default

MORE............. vids please
Reply
Old Nov 24, 2008 | 06:04 PM
  #33  
Sharif@Forged's Avatar
Sharif@Forged
Sponsor
Forged Performance
iTrader: (92)
 
Joined: Dec 2003
Posts: 13,733
Likes: 1
From: Marietta, GA
Default

Originally Posted by 500HPZ
Doug, I am prepared on that part too. Injectors were at 95% duty cycle

The car pretty much is in Grenade mode!! I have a couple of 500whp evos, 600hp mustang to take care of on the enclosed race track tonight. I will be surprised if I actually drive it home.
woohoo! In for vids!
Reply
Old Nov 24, 2008 | 08:06 PM
  #34  
350 Rookie's Avatar
350 Rookie
Banned
iTrader: (29)
 
Joined: Oct 2006
Posts: 2,157
Likes: 0
From: Cheshire CT
Default

damn, i guess a good tune could do miracles.
Reply
Old Nov 24, 2008 | 08:57 PM
  #35  
HAVideos's Avatar
HAVideos
Registered User
 
Joined: Nov 2008
Posts: 6
Likes: 0
From: Colorado
Default

Originally Posted by Alberto
At 5800ft, 11's isnt a true time at 9psi. Post ACTUAL times not corrected BS.
11.8 @ 118mph sounds like a GTECH time lol...
those dont sound like questions to me....perhaps someone else has their panties in a bunch he showed you the videos of the car running the times he said it ran. the funniest part to me was the fact that right after you post your claim of corrected times he provides solid track video...im pretty sure Bandimere Speedway doesnt give corrected numbers lol. or have their timing system provided by GTECH.

ive personally been in the car filming plenty of times while it was on 9psi...and it was nasty. since im sure some are too lazy to search for them themselves, here is the link for another video of the car being put through plenty of abuse on 9psi
Denver Racing
i have plenty more video of it on 13 and 16lbs but im pretty busy with stuff for a DVD coming soon so you will have to wait to see those.

the car makes power, definitely gets put through abuse, and does every form of racing almost lol...the damn thing just doesnt want to blow up yet. thats saying something for the tuning. able to make good power safely.

so ...dont get mad that some people know what they are doing up here, and can go faster than you can down at low altitude im just kidding that was mean... but hey give him his due credit, its tough to be quick up here
Reply
Old Nov 24, 2008 | 10:21 PM
  #36  
zmedic16's Avatar
zmedic16
Registered User
iTrader: (6)
 
Joined: Nov 2006
Posts: 588
Likes: 0
From: bronx new york
Default

+1^ credit given. damn thats quick.
Reply
Old Nov 25, 2008 | 10:40 AM
  #37  
MzIntegrity's Avatar
MzIntegrity
Registered User
 
Joined: Nov 2008
Posts: 1
Likes: 0
From: CO
Default

Originally Posted by QuadCam
at 5800 ft above sea level, you are approx 3 psi less air pressure than at sea level.

you should post your actual numbers....not some corrected number. If you are at 5800ft, you AREN'T making the power that you are posting!!!! there is no sense in posting corrected numbers...... keep the boost set at those levels and then dyno your car at a sea level dyno.....and watch it blow up!!!!!!
Put the "newb hammer" away and don't be fawking haters
He posted his numbers and the correction factor so anyone who knows how to do simple math should be able to figure it out. Not to worried about if you are just lazy or we-todd-did but here it is

9.5psi the car made 448whp 444tq on 91 octane
13psi the car made 560whp 562tq on 114 octane
16psi-15psi the car made 597whp 618tq 114 octane

With a correction factor of 1.18 that means the raw numbers are

380, 474, 506

Gee my brain hurts now

Edit:

Oh and the comment about a correction factor at the track, WOW, not sure where you race but that is the most bizarre thing I think I have ever heard

Last edited by MzIntegrity; Nov 25, 2008 at 10:45 AM. Reason: Add comment regarding timeslip
Reply
Old Nov 25, 2008 | 10:47 AM
  #38  
Highway Riding's Avatar
Highway Riding
New Member
iTrader: (6)
 
Joined: Apr 2008
Posts: 5,543
Likes: 95
From: Out on the Highway!
Default

Very nice! Cool video in the latest post too bro.. Always makes work go by faster.
Reply
Old Nov 25, 2008 | 10:49 AM
  #39  
Nexx's Avatar
Nexx
New Member
iTrader: (41)
 
Joined: Jun 2005
Posts: 13,654
Likes: 8
From: DFW
Default

Originally Posted by MzIntegrity
Put the "newb hammer" away and don't be fawking haters
He posted his numbers and the correction factor so anyone who knows how to do simple math should be able to figure it out. Not to worried about if you are just lazy or we-todd-did but here it is

9.5psi the car made 448whp 444tq on 91 octane
13psi the car made 560whp 562tq on 114 octane
16psi-15psi the car made 597whp 618tq 114 octane

With a correction factor of 1.18 that means the raw numbers are

380, 474, 506

Gee my brain hurts now

Edit:

Oh and the comment about a correction factor at the track, WOW, not sure where you race but that is the most bizarre thing I think I have ever heard
i think all the numbers you posted are at the two extreme ends of the spectrum. i think the true numbers are kinda in the middle. i think the guy you quoted is right, why even make any corrections?
Reply
Old Nov 25, 2008 | 11:00 AM
  #40  
wannabuy350z's Avatar
wannabuy350z
Registered User
iTrader: (27)
 
Joined: Dec 2007
Posts: 1,301
Likes: 2
From: SD SoCal | Jed, KSA
Default

He just has a freak motor.
Reply



All times are GMT -8. The time now is 05:59 AM.