Notices
G35/G37 General discussion and news for Infiniti's G or for full Forums check out MyG37.com or G35Driver.com

Ran at the track last night.....G35 Sedan 6MT

Thread Tools
 
Search this Thread
 
Old May 23, 2004 | 09:14 AM
  #1  
SOLO-350Z's Avatar
SOLO-350Z
Thread Starter
'12 TL SH-AWD
Premier Member
iTrader: (26)
 
Joined: Feb 2004
Posts: 6,348
Likes: 1
From: Alamo
Default Ran at the track last night.....G35 Sedan 6MT

Went to the track last night, couldn't beat my best in the trap time, but the trap speed has increased.

My last time the conditions were 40 degrees, and no humudity. With the car only having 1900 miles. I got 14.32 at 97.6 mph, 2.196 60ft~.

This time the condtions were 80 degrees~, 70%~ humidity.

14.3735 at 98.08 mph 2.1669 60ft

14.4698 at 98.79 mph 2.2032 60ft.

Links to the rest of the timeslips are here.

The laucnh and the car just either spins or bogs, I could not find the right point to get her to work well still.

Only mods are Z-tube and K&N drop in. Car weighed in at 3360 without spare, before with spare the first time at the track I went I had a full load it weighed in at 3385. Both times were less than 1/4 tank of gas of 93 octane.

http://www.g35world.com/g35/track

Slips.
Reply
Old May 23, 2004 | 09:20 AM
  #2  
georgiaboy's Avatar
georgiaboy
Banned
 
Joined: May 2004
Posts: 115
Likes: 0
From: GA
Default

Atleast you are increasing in trap speed!!
Reply
Old May 23, 2004 | 09:58 PM
  #3  
themyst's Avatar
themyst
Registered User
iTrader: (1)
 
Joined: Oct 2002
Posts: 746
Likes: 0
From: Flushing
Default

once you find and master the clutch engagement point, you will be doing 2.0x 60fts in no time. also powershifting would help your times a bit. I can see the potential for a 14.0 quarter mile with good driving.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
hajwoj
Autocross/Road
27
Nov 1, 2015 05:25 PM
Stevo Z
SoCal Marketplace
4
Oct 3, 2015 09:14 PM
SharX59
Engine & Drivetrain
7
Sep 30, 2015 10:54 AM




All times are GMT -8. The time now is 04:18 PM.