(Shoot me a PM for details on pricing, as pricing is different depending on finish, specific car, etc).

I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work:

Gloss black -





Matte black (looks like the same car, but it's actually a different one) -





3M Di-Noc Carbon Fiber -





For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done.

However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well.

- Gloss/matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl
- Black out window trim vinyl
- Interior/exterior trim
- Headlight/Tail light tinting
- Custom cut stickers/graphics
- Full car wraps
- Installations
- And More...

Let me know if you guys have any questions or if you are interested in anything.

thanks.

-Don

donathon@gmail.com

 

Bump! Did a real clean job on my roof

 

I have a 350Z
Can I have 3 quotes please.
I want the roof, hatch and upper door frame done as so
http://i96.photobucket.com/albums/l1...ZdayZ09170.jpg

Quote 1 : All in gloss black
Quote 2: carbon fiber
Quote 3: How much to tint rear taillight and lower turn signals (do you use window tint. or vinyl for tail lights?)

 

PM sent

 

PMs sent to everyone. Let me know if you got them or not.

Thanks. Glad you liked it! You have an awesome car. Can't wait to see it once its done.

The owner of this white Audi R8 was getting other work done on the car and he decided to have me tint his headlights with my light smoke/tint film as well. The owner of this car was from around the Los Angeles county area and drove out to me in Orange County to get the work done. I took some pictures of the car with the headlights off and the parking lights on to show how the light transmission looked like after the install was done. Over, it gave it a nice meaner look without reducing overall light output by anything too much.

Before:




During - Driver (right) side tinted/smoked, passenger (left) side stock.


After:






-Don Nguyen

donathon@gmail.com

 

For the roof of this white Nissan 370z, I vinyl wrapped it in the 3M dinoc matte carbon fiber material. I did not take before pictures, since time was against my side, but I am sure you can imagine how it probably looked like before. I think the cf went well with the overall styling of the rest of the car. The owner of this car was from around Redlands or Riverside county and drove out to me in Orange County/Anaheim Hills to get the work done.











-Don Nguyen

donathon@gmail.com

 

The owner of this grey/gunmetal colored Mercedes Benz C63 AMG had me vinyl wrap the chrome / brushed aluminum window trim/surround on his car with my matte black vinyl material. The owner wanted the shadowline look. In addition to the window trim, I also vinyl wrapped the b pillars and trunk handle on his car with the 3M dinoc matte carbon fiber material. It's a nice little finishing touch on the car and I think it went well with the overall theme and color of the car.

Before:








After:










-Don Nguyen

donathon@gmail.com

 

Just as a side note for those who are keeping track or paying attention when my next Norcal trip is going to be. I am probably going to be going back up there in about 4-6 weeks. When I have an exact date down, I'll make a dedicated thread for it for those who are interested to sign up.

The owner of this silver BMW E39 540i sedan came by to have me vinyl wrap the roof of his car with my gloss black vinyl material. We went with gloss black over matte black for his car. Overall, it went very well with the look and styling of his car fairly well.

Before:




After:












-Don Nguyen

donathon@gmail.com

 

PM sent

 

Just as a side note for those who are keeping track or paying attention when my next Norcal trip is going to be. I am probably going to be going back up there in about 4-6 weeks. When I have an exact date down, I'll make a dedicated thread for it for those who are interested to sign up.

The owner of this silver BMW E39 540i sedan came by to have me vinyl wrap the roof of his car with my gloss black vinyl material. We went with gloss black over matte black for his car. Overall, it went very well with the look and styling of his car fairly well.

Before:




After:












-Don Nguyen

donathon@gmail.com

 

For this new white Mercedes Benz CLS550 sedan, I vinyl wrapped the tail lights with my light tint/smoke film material. On this car, I we decided to do the whole tail light. I didn't take pictures of it before, but the first picture does show the driver side as tinted/smoked (left) and the passenger (right) untinted. The lighting of it inside kind of makes it hard to gauge, but in the other pictures where I took them outside will help you better see the differences. As you can notice, as the lighting changes, the appearance of the darkness of the shade changes as well.









-Don Nguyen

Donathon@gmail.com

 

Here is a white VW Mk6 that had me vinyl wrap the roof of his car with the 3M dinoc matte carbon fiber vinyl. I wrapped the material around the antenna and did the top rear hatch part as well. The carbon look adds a nice touch to the car. The owner of this car drove out to me in Anaheim Hills / Orange County to have the work done. I took a picture of the side of the roof where the material end, since people usually ask what it looks like for cars that do not have rails/etc.























-Don Nguyen

donathon@gmail.com

 

The owner of this car had me black out the chrome/brushed aluminum window trim on his brand new white Mercedes Benz E350. We went with the matte black finish for around the window trim area. In addition to the window trim, he also had me wrap the middle center section of his front bumper in my gloss black vinyl material. He drove out to me in Anaheim Hills/Orange County to have the vinyl work done.

Before:






After:










-Don Nguyen

donathon@gmail.com

 

Here is an example of a stock white Mercedes Benz C300 sedan that came in to have me vinyl their roof in my gloss black vinyl material. Even though the owner of this car was going to leave his car relatively stock, the black roof was still a nice addition to the car, which gave it an OEM+ look. The owner of this car drove out to me in Orange County / Anaheim Hills to get the vinyl work done. The only thing I would have suggested him to also get done was to black out the chrome window trim around the doors and the chrome trunk handle piece in the back. That would have really set the car off fairly nicely.

Before:




After:










-Don Nguyen

donathon@gmail.com

 

The owner of this brand new white VW TDI wagon brought his car by to have me lightly tint / smoke the tail lights and third brake light on his car. I took some pictures from side to side, showing how the tint looks like in directly sunlight and in some shade. As you can see, it's fairly dynamic and changes depending on the lighting. I haven't had anyone have any issues with this shade though, as far as light output or having any issues with law authorities though, so that is a plus. The owner of this car I believe was from around Pasadena and drove out to me in Anaheim Hills / Orange County to get the work done.

Before:




During (driver/left side tinted, passenger/right side stock) -




After:










-Don Nguyen

donathon@gmail.com

 

I've had a couple of people ask me to post some more pictures of the 3M 1080 gloss carbon fiber finish, so here is a white Lexus IS350 sedan that I vinyl wrapped the roof with in that material. Also note, the roof spoiler is a real carbon piece, so this will also help give those an idea of how the vinyl material compares/contrast against real carbon. The owner of this car drove out to me in Anaheim Hills / Orange County to get the work done. We went with the 3M 1080 gloss carbon fiber vinyl finish over the 3M di-noc matte carbon fiber finish to closer match real cf and go with his roof spoiler better.

Before:




After:










-Don Nguyen

donathon@gmail.com

 

People usually ask me if they should go with gloss black or matte black for the window trim on their black cars, so here is an example of matte black on this brand new BMW F10 sapphire metallic 5 series sedan. With the black wheels on the car, it made the chrome window trim stand out even more. So you can see the differences of the before and after are quite drastic, even for such a small detail. The owner of this car was also around/from Orange County and drove out to my shop in Anaheim Hills. I liked the end results and how this car turned out with the black vinyl trim.

Before:




After:










-Don Nguyen

donathon@gmail.com

 

I found a random sheet of satin black / semi gloss for $20 + shipping. Large enough for a roof only.

Let me know if anyone is interested.

-Don

 

Tinted / smoked the center clear portion of the tail lights on this brand new white Mercedes E350 sedan. In addition to tinting the tail lights with my light film material, I also wrapped the trunk spoiler in the 3M 1080 gloss carbon fiber material and blacked out the chrome trunk handle with my matte black vinyl material. Overall, the light shade of tint was a nice slight change in the look of the car, without making it too dark and is still visible during the day/night.

Most spoilers aren't practical to wrap, but this one happen to work out.

Before:




Driver side tinted/smoked - passenger side stock:


After:












-Don Nguyen

donathon@gmail.com

 

I thought I had taken more pictures of this car, but three is all I have I suppose. This is a car that I did for Hyundai for last year's SEMA, just to give you an idea of how some old some of my pictures can be or take before getting uploaded. They wanted to do a real carbon roof, but did not have enough time to do it before SEMA, so having me vinyl wrap it with the 3M dinoc matte carbon fiber vinyl material was the next alternative. I wrapped both the painted and glass part that's on the Veloster.







-Don Nguyen

donathon@gmail.com