South MS Z's
#4561
Guest
Posts: n/a
mannnn i just figured out all the crap and now i noticed my speddo etc the crown above steering wheel and 3three in center dash are all working but it's not illuminating.
neither does dimm on the lowest light setting but normal and brights work......
all other lights work even brights. all gauges work but just dont light up, wtf did i break now???? sigh....
i got the non-mitus touch or mitus touch however you wanna look at it....
seen no blown fuses checked kick panel and battery panel just to be sure.
i dont think i missed one but i was drunk *shrug* obviously something when i was playing guess the wire game. anyone have an idea whats up?
and oh yeah --- whaaazzaappp
neither does dimm on the lowest light setting but normal and brights work......
all other lights work even brights. all gauges work but just dont light up, wtf did i break now???? sigh....
i got the non-mitus touch or mitus touch however you wanna look at it....
seen no blown fuses checked kick panel and battery panel just to be sure.
i dont think i missed one but i was drunk *shrug* obviously something when i was playing guess the wire game. anyone have an idea whats up?
and oh yeah --- whaaazzaappp
#4562
Registered User
iTrader: (28)
Join Date: Oct 2006
Location: ROFL
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
i have like 100 in tickets, i don thave a decal up so they fine me 15 for no decal and 10 for wrong zone. and monday i got a ticket for getting a boot and no decal and in wrong zone so that was 45 worth. today i parked in central AFTER 1:45, so your suppose to be able to park anywhere right? but the you STILL HAVE to have a damn decal. all these loopholes im trying to find are getting shot down lol
#4563
Registered User
iTrader: (28)
Join Date: Oct 2006
Location: ROFL
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 350zdood
mannnn i just figured out all the crap and now i noticed my speddo etc the crown above steering wheel and 3three in center dash are all working but it's not illuminating.
neither does dimm on the lowest light setting but normal and brights work......
all other lights work even brights. all gauges work but just dont light up, wtf did i break now???? sigh....
i got the non-mitus touch or mitus touch however you wanna look at it....
seen no blown fuses checked kick panel and battery panel just to be sure.
i dont think i missed one but i was drunk *shrug* obviously something when i was playing guess the wire game. anyone have an idea whats up?
and oh yeah --- whaaazzaappp
neither does dimm on the lowest light setting but normal and brights work......
all other lights work even brights. all gauges work but just dont light up, wtf did i break now???? sigh....
i got the non-mitus touch or mitus touch however you wanna look at it....
seen no blown fuses checked kick panel and battery panel just to be sure.
i dont think i missed one but i was drunk *shrug* obviously something when i was playing guess the wire game. anyone have an idea whats up?
and oh yeah --- whaaazzaappp
#4565
New Member
Thread Starter
iTrader: (21)
Join Date: Jan 2007
Location: Alabama
Posts: 2,821
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jammin
i have like 100 in tickets, i don thave a decal up so they fine me 15 for no decal and 10 for wrong zone. and monday i got a ticket for getting a boot and no decal and in wrong zone so that was 45 worth. today i parked in central AFTER 1:45, so your suppose to be able to park anywhere right? but the you STILL HAVE to have a damn decal. all these loopholes im trying to find are getting shot down lol
#4566
Registered User
iTrader: (28)
Join Date: Oct 2006
Location: ROFL
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE_SCHROED
Why don't you have a decal, LAZY??? I can't wait till I live off campus next year so I can park almost anywhere.
lol and u cant park "anywhere" if u live off campus. your still going to have to choose a zone, and thats where u stick with for the year... unless u claim ur decal lost and get a new one =p
#4568
Registered User
iTrader: (28)
Join Date: Oct 2006
Location: ROFL
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE_SCHROED
Don't they look at your schedule? That's studpid that they only do it at the beginning of the year.
#4569
Guest
Posts: n/a
Originally Posted by jammin
was it the usa spec pa11 thingy for the ipod uw ere having trouble installing? my friend installed that for me a year ago. and no probs
i broke the male part that held the wires into the two piece harness and the wires split apart.... this is the main harness that plugs into the pa11-nis also then it plugs into the m40 10pin harness.. so it's like guessing wires because
THEY dont match up. all year model Z's i've noticed have different colored wires also.
but i read the service manual blasian showed me where to get them for all years and i basically figured the pin out etc.
but now obviously somehing got fried when the wires split because as i said the gauges arent lighting up, the very dim on headlights doesnt work on that setting, and the side mirrors do not move now. oh yeah and head unit has no illumination either.
other than that everything else works, brights work, regular works, top works, slip light will come on satbelt service engine on startup etc light up but those aren't part of the illuminated gauges im afraid.
other than that everything else works fine... i guess ill have to get the stealership to look at it. unless i can figure it out via the wiring diagrams etc.... but i doubt it plus im at my wits end with my tv breaking and my own dumb mistakes...
so yeah i doubt if ill be around for a little while time to goto the woolmarket range and squeeze some off great stress reliever lol...
F'it
dougie fresh, out.
#4571
Registered User
iTrader: (19)
Originally Posted by 350zdood
]i broke the main m40 harness that's a 10pin that goes to the head unit.
i broke the male part that held the wires into the two piece harness and the wires split apart.... this is the main harness that plugs into the pa11-nis also then it plugs into the m40 10pin harness.. so it's like guessing wires because
THEY dont match up. all year model Z's i've noticed have different colored wires also.
but i read the service manual blasian showed me where to get them for all years and i basically figured the pin out etc.
but now obviously somehing got fried when the wires split because as i said the gauges arent lighting up, the very dim on headlights doesnt work on that setting, and the side mirrors do not move now. oh yeah and head unit has no illumination either.
other than that everything else works, brights work, regular works, top works, slip light will come on satbelt service engine on startup etc light up but those aren't part of the illuminated gauges im afraid.
other than that everything else works fine... i guess ill have to get the stealership to look at it. unless i can figure it out via the wiring diagrams etc.... but i doubt it plus im at my wits end with my tv breaking and my own dumb mistakes...
so yeah i doubt if ill be around for a little while time to goto the woolmarket range and squeeze some off great stress reliever lol...
F'it
dougie fresh, out.
i broke the male part that held the wires into the two piece harness and the wires split apart.... this is the main harness that plugs into the pa11-nis also then it plugs into the m40 10pin harness.. so it's like guessing wires because
THEY dont match up. all year model Z's i've noticed have different colored wires also.
but i read the service manual blasian showed me where to get them for all years and i basically figured the pin out etc.
but now obviously somehing got fried when the wires split because as i said the gauges arent lighting up, the very dim on headlights doesnt work on that setting, and the side mirrors do not move now. oh yeah and head unit has no illumination either.
other than that everything else works, brights work, regular works, top works, slip light will come on satbelt service engine on startup etc light up but those aren't part of the illuminated gauges im afraid.
other than that everything else works fine... i guess ill have to get the stealership to look at it. unless i can figure it out via the wiring diagrams etc.... but i doubt it plus im at my wits end with my tv breaking and my own dumb mistakes...
so yeah i doubt if ill be around for a little while time to goto the woolmarket range and squeeze some off great stress reliever lol...
F'it
dougie fresh, out.
#4572
Guest
Posts: n/a
Originally Posted by DustinZ33
Maybe some of the prongs are loose in the harness. Check that first. I wouldn't bring it to the dealer. They won't cover it under warranty because you pulled it apart. It didn't just happen.
i dont know but i've given up i found a non dealer guy who looked at it and had been working on electronics for many years he even did audio installs he's like 40ish and probably an electronic veteran etc he's the only one that would even touch it havent took it to the dealer yet last resort. even some electrical people threw their hands up and said good luck basically lol even they couldnt figure it out... which i find highly fuggin sad.
but yeah he feels he can route it out and fix it... he said if he wants to fix it dont tough it and he can lock it up overnight etc and do it saturday morning.
so that is what im gonna do.
tv on the mend
#4576
Guest
Posts: n/a
Originally Posted by kramykram
funny haha im waiting for ups to get here with my new phone also so i can do the same. but its not like i don't do it from work anyways ahhahahaha
lol ups coming with the axis shines in next few days. mounted balanced with falkens staggered. all install hardware etc.
and just got my tracking number for my greddy upper strut from darren at intense.
hopefully i get this fixed saturday cross ya'lls fingers for me lol... i still haven't gotten to install my carbon fiber dash kit or any of my aftermarkets but ahhh that's life
hehehhe
but it's too fun intalling parts drunk lol..
what's these extra bolts for? -- who cares? lol...