No the hood was already sold, The spoiler is not for sale.

 

Pictures in my photobucket Account here:

http://s30.photobucket.com/albums/c346/ZPIMPN/

Now for the after market Parts.

*USED* 3 pc. J-Line 6RL3 custom wheels with BRAND NEW BFG KDW2 tires 20x9.5 and 20x11 265/30 and 285/30 - $3499 ( Tires have less than 1k on them!!!) ( With out tires, just rims $2599)

*USED* Rotora Brake Kit 14" - 4 wheel kitm 8 piston and 4 piston $2900 ( Only 350Z 8 Piston Brake kit by rotora out right now)

*USED* Tein Basic Coilovers - $599 - Pending Sale to Local

*USED* Kinetix front adjustable A-Arms $249

*USED* SPC rear camber arms - $149 ( now includes toe bolts)

*Brand new* Test Pipes ( not resonated. no brand)- $149 *MAKE OFFER

*USED* Bride Brix II seats in Red with Original Bride Sliders (pair)- $1500

*USED*Seibon VT Carbon Fiber hood - SOLD

*USED/REBUILT* Greddy Twin Turbo kit with E-01 and Intercooler Defi Gauges, JWT oil Pan spacer, Oil Cooler, HKS SSQV, turbos have just been rebuilt and are in brand new conditon not installed on car. includes walbro fuel pump. Excellent condition. Greddy Turbo Timer(brand new), reg. Waste gate springs and 9lb wastes springs $4900 * MAKE OFFER!!

*NEW* Emanage Ultimate with Autosport Harness already wired - $700 also includes A/f wire ( not avail. yet)

*NEW* Arias ED pistons .20 over 9:1 compression, Eagle Rods, ARP Main and head Studs, All BRAND NEW SEALED! and cometic head gasket - $2000

*NEW* Ferrea Valvetrain kit for use with stockvavles , good for 9k RPMS - $799

*NEW* 650cc Deatchwork injectors, clips into to factory harness no modification needed. $450 ( do not need ur stock injectors )

*USED* Koyo 3 row Radiator - $300

350 EVO Short throw shifter - SOLD

*USED* Cusco LSD with 3.9 350 Evo Ring and Pinion all assembled ready to drop in - $1500, If you want to trade for a stock VLSD its $1200 plus ur stock VLSD


*NEW* KJR Crank Pulley - 150 * REDUCED

*USED* Samco Blue Radiator hoses - $180 * Make offer!

*USED* Greddy Engine and Radiaotr Caps - $50

*NEW* Innovate LC-1 With 02 Sensor - $200


*NEW* CJM Stage 2 Fuel kit, BRAND NEW SEALED !!! = $999 shipped

*USED* 3.3 Ring and pinion = 150 shipped


*USED* for 5k mi JWT Clutch and Flywheel I will sell the combo for $500 * REDUCED


*NEW* SVR tech. Steel Solid motormounts - $90 bucks


Please PM me with serious inquires and REASONABLE offers. Thanks.

-George

 

PM sent.

 

All PMs Replied.

 

How much of a drop can you get with the tein Basics?? I have the Tanabe springs right now and would love it a notch lower in the rear...

THanks

 

Thanks Again.

 

..

 

max drop in back for tein basic is 1.1inch, the front I'm not sure, but it goes lower.

 

the front can go low enough to lay the car on the floor

 

Pictures in my photobucket Account here:

http://s30.photobucket.com/albums/c346/ZPIMPN/

Now for the after market Parts.

*USED* 3 pc. J-Line 6RL3 custom wheels with BRAND NEW BFG KDW2 tires 20x9.5 and 20x11 265/30 and 285/30 - $3499 ( Tires have less than 1k on them!!!) ( With out tires, just rims $2599)

*USED* Rotora Brake Kit 14" - 4 wheel kitm 8 piston and 4 piston $2900 ( Only 350Z 8 Piston Brake kit by rotora out right now)

*USED* Tein Basic Coilovers - $599 - Pending Sale to Local

*USED* Kinetix front adjustable A-Arms $249 PENDING SALE

*USED* SPC rear camber arms - $149 ( now includes toe bolts) PENDING SALE

*Brand new* Test Pipes ( not resonated. no brand)- $149 *MAKE OFFER

*USED* Bride Brix II seats in Red with Original Bride Sliders (pair)- $1500

*USED/REBUILT* Greddy Twin Turbo kit with E-01 and Intercooler Defi Gauges, JWT oil Pan spacer, Oil Cooler, HKS SSQV, turbos have just been rebuilt and are in brand new conditon not installed on car. includes walbro fuel pump. Excellent condition. Greddy Turbo Timer(brand new), reg. Waste gate springs and 9lb wastes springs $4900 *

*NEW* Emanage Ultimate with Autosport Harness already wired - $700 also includes A/f wire ( not avail. yet)

*NEW* Arias ED pistons .20 over 9:1 compression, Eagle Rods, ARP Main and head Studs, All BRAND NEW SEALED! and cometic head gasket - $2000

*NEW* Ferrea Valvetrain kit for use with stockvavles , good for 9k RPMS - $799

*NEW* 650cc Deatchwork injectors, clips into to factory harness no modification needed. $450 ( do not need ur stock injectors )

*USED* Koyo 3 row Radiator - $300

*USED* Cusco LSD with 3.9 350 Evo Ring and Pinion all assembled ready to drop in - $1500, If you want to trade for a stock VLSD its $1200 plus ur stock VLSD


*NEW* KJR Crank Pulley - 150 * REDUCED

*USED* Samco Blue Radiator hoses - $180 * Make offer

*USED* Greddy Engine and Radiaotr Caps - $50

*NEW* Innovate LC-1 With 02 Sensor - $200 SHIPPED


*USED* 3.3 Ring and pinion = 150 shipped


*USED* for 5k mi JWT Clutch and Flywheel I will sell the combo for $500 * REDUCED


*NEW* SVR tech. Steel Solid motormounts - $90 bucks SHIPPED


Please PM me with serious inquires and REASONABLE offers. Thanks.

 

HKS Exhaust Sold

 

Sent a PM yesterday, any chance of a reply?

 

Sorry been getting 20 pms a day. Replied.

 

350Z Parts for Sale--UPDATE!

Pictures in my photobucket Account here:

http://s30.photobucket.com/albums/c346/ZPIMPN/

Now this is whats left, everything else is gone!


*USED* Rotora Brake Kit 14" - 4 wheel kitm 8 piston and 4 piston $2900 ( Only 350Z 8 Piston Brake kit by rotora out right now)

*USED* Tein Basic Coilovers - $599 - Pending Sale to Local

*USED* Kinetix front adjustable A-Arms $249 PENDING SALE

*USED* SPC rear camber arms - $149 ( now includes toe bolts) PENDING SALE

*Brand new* Test Pipes ( not resonated. no brand)- $149 *MAKE OFFER

*USED* Bride Brix II seats in Red with Original Bride Sliders (pair)- $1450

*USED/REBUILT* Greddy Twin Turbo kit with E-01 and Intercooler Defi Gauges, JWT oil Pan spacer, Oil Cooler, HKS SSQV, turbos have just been rebuilt and are in brand new conditon not installed on car. includes walbro fuel pump. Excellent condition. Greddy Turbo Timer(brand new), reg. Waste gate springs and 9lb wastes springs ONLY $4900

*NEW* Emanage Ultimate with Autosport Harness already wired - $700 also includes A/f wire ( Pending Sale)

*NEW* Arias ED pistons .20 over 9:1 compression, Eagle Rods, ARP Main and head Studs, All BRAND NEW SEALED! and cometic head gasket - $2000

*NEW* Ferrea Valvetrain kit for use with stockvavles , good for 9k RPMS - $799

*NEW* 650cc Deatchwork injectors, clips into to factory harness no modification needed. $450 ( do not need ur stock injectors )

*USED* Koyo 3 row Radiator - $295

*USED* Cusco LSD with 3.9 350 Evo Ring and Pinion all assembled ready to drop in - $1495, If you want to trade for a stock VLSD its $1195 plus your stock VLSD


*NEW* KJR Crank Pulley - 150 * REDUCED

*USED* Samco Blue Radiator hoses - $170

*USED* Greddy Engine and Radiaotr Caps - $50

*NEW* Innovate LC-1 With 02 Sensor - $200 SHIPPED


*USED* 3.3 Ring and pinion = 150 shipped


*USED* for 5k mi JWT Clutch and Flywheel I will sell the combo for $500 * REDUCED


*NEW* SVR tech. Steel Solid motormounts - $90 bucks SHIPPED


Please PM me with serious inquires and REASONABLE offers. Thanks.

 

Oh yea I also have a GReddy strut tower bar, brand new, will sell for $150 or include with turbo kit for free!

 

umm, it's $105 brand new

http://www.intensepower.com/grgrfrsttoba.html

 

I'd be interested in the 3.9 ring and pinion only. I don't need the LSD. If you're willing to sell that separate for $400 or less... Let le know via PM. Otherwise I'll have to wait until Z1 restocks the Central 20 version.

 

No i am not taking it apart that would cost to much its a package deal, especially to sell for just 400

 

I meant 105 not 150 sorry

 

Sent another PM. When you get a chance, check your inbox and reply. Thanx!