WELL I GOT THIS TITEK CF AIR DUCT FOR MY DAY FROM PHASE 2 MOTO.. BUT WHEN I OPENED THE PACKAGE IT WAS JUST THE DUCT AND SOME LIL METAL RODS NO INSTRUCTIONS OR STENCIL CALLED THEM THEY SAY IT DOESNT COME WITH IT BS!! AND I TOLD THEM I WOULD SEND IT BAK BUT THERE WOULD BE A 20% RESTOCKING FEE F THAT SO.... IM HERE FOR SOME HELP ANY ONE HERE HAVE THE TITEK STENCIL CUT OUT??? AND AM I SUPPOSE TO USE THIS METAL RODS TO HOLD THE DUCT DOWN OR WHAT SO IF ANY ONE HAD EXPERIENCE WITH THE TITEK AIR DUCT LET ME KNOW SOME POINTERS SO I CAN PUT THIS ON MY Z THANXS AMIGOS!!!

 

hey bro the titek stencil blows ***. I cut it out exactly the way the stencil was and when I tried puting in the duct it didnt fit for crap. The hole was WAYYY too small . What I had to do was get a sheet of paper and keep trimming it untill it fits flush on the the backside of the duct. Tape it on aligned to the frame hole and just cut it out. Alot easier.

 

Dam!!!!

 

WAT ABOUT THOSE METAL RODS WAT ARE THEY FOR?????

 

those are rivets dude . You will need a rivet gun if you want to use them. I personally went to a hardware store and bought some small self tapping screws with a flat shaped round head. The scews melt into the bumper easily with just a screwdriver. Just be carefull not to make the hole too big cause if the cut extends into where the mounting holes are you are screwed.

 

dude..chill with the caps lock.
x__X"
please?

 

YA MAN WHATS UP WITH THE CAPS

 

my bad.....didnt think people get all uptight about it lol

 

sounds good well ill see if i install it this weekend.........thanx a lol pooplet

 

search my posts for the stencil


edit: got it for you
https://my350z.com/forum/exterior-and-interior/248806-varis-duct-help-needed.html

 

thank i was searching for it too ill check it out

 

no problem. hope it helps

 

i heard that the titek and varis are a lil different but it should help me out with aligning it and fitt thank again

 

The Varis and the Titek are not exact copies of each other, so be careful if you use the Varis template on the Titek and vice versa.

 

Thanks a ton USN!!! Been looking for is template with no luck till now...

 

+1 I spent and hour and a half cutting little by little. Now I'm self conscious if it's crooked or not.. lol

 

dam ya its not a good match but i really dont want to mess with it soo... does any one have the titek templet ill really appreciate it

 

I just bought an air duct from the z store. i think its an evo-r. after reading about this and contiplating, i am getting cold feet, now i am not so sure about cuttng my bumper for baisically cosmetic reasons.
what do you guys think?

 

If the ducts weren't out of stock, I'd open one up and make a copy. Titek won't have any more for at least a couple of weeks. If you still need one when the new shipment comes in, I'll defintely get one for you.

 

I should be getting mine today, just aslong as Fedex can deleiver it