HELP:Titek Cf Air Duct Stencil Needed
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Oct 2006
Location: So.Cal 626 BP
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
HELP:Titek Cf Air Duct Stencil Needed
WELL I GOT THIS TITEK CF AIR DUCT FOR MY DAY FROM PHASE 2 MOTO.. BUT WHEN I OPENED THE PACKAGE IT WAS JUST THE DUCT AND SOME LIL METAL RODS NO INSTRUCTIONS OR STENCIL CALLED THEM THEY SAY IT DOESNT COME WITH IT BS!! AND I TOLD THEM I WOULD SEND IT BAK BUT THERE WOULD BE A 20% RESTOCKING FEE F THAT SO.... IM HERE FOR SOME HELP ANY ONE HERE HAVE THE TITEK STENCIL CUT OUT??? AND AM I SUPPOSE TO USE THIS METAL RODS TO HOLD THE DUCT DOWN OR WHAT SO IF ANY ONE HAD EXPERIENCE WITH THE TITEK AIR DUCT LET ME KNOW SOME POINTERS SO I CAN PUT THIS ON MY Z THANXS AMIGOS!!!
#2
Registered User
iTrader: (6)
Join Date: Feb 2007
Location: K-Town/Hacienda Hts
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
hey bro the titek stencil blows ***. I cut it out exactly the way the stencil was and when I tried puting in the duct it didnt fit for crap. The hole was WAYYY too small . What I had to do was get a sheet of paper and keep trimming it untill it fits flush on the the backside of the duct. Tape it on aligned to the frame hole and just cut it out. Alot easier.
#4
Registered User
Thread Starter
iTrader: (7)
Join Date: Oct 2006
Location: So.Cal 626 BP
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pooplet
hey bro the titek stencil blows ***. I cut it out exactly the way the stencil was and when I tried puting in the duct it didnt fit for crap. The hole was WAYYY too small . What I had to do was get a sheet of paper and keep trimming it untill it fits flush on the the backside of the duct. Tape it on aligned to the frame hole and just cut it out. Alot easier.
#5
Registered User
iTrader: (6)
Join Date: Feb 2007
Location: K-Town/Hacienda Hts
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
those are rivets dude . You will need a rivet gun if you want to use them. I personally went to a hardware store and bought some small self tapping screws with a flat shaped round head. The scews melt into the bumper easily with just a screwdriver. Just be carefull not to make the hole too big cause if the cut extends into where the mounting holes are you are screwed.
Trending Topics
#9
Registered User
Thread Starter
iTrader: (7)
Join Date: Oct 2006
Location: So.Cal 626 BP
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pooplet
those are rivets dude . You will need a rivet gun if you want to use them. I personally went to a hardware store and bought some small self tapping screws with a flat shaped round head. The scews melt into the bumper easily with just a screwdriver. Just be carefull not to make the hole too big cause if the cut extends into where the mounting holes are you are screwed.
#10
350Z-holic
iTrader: (113)
search my posts for the stencil
edit: got it for you
https://my350z.com/forum/exterior-and-interior/248806-varis-duct-help-needed.html
edit: got it for you
https://my350z.com/forum/exterior-and-interior/248806-varis-duct-help-needed.html
Last edited by Mike Wazowski; 04-18-2007 at 03:30 PM.
#11
Registered User
Thread Starter
iTrader: (7)
Join Date: Oct 2006
Location: So.Cal 626 BP
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USN HM 350Z
search my posts for the stencil
edit: got it for you
https://my350z.com/forum/showthread.php?t=248806
edit: got it for you
https://my350z.com/forum/showthread.php?t=248806
#13
Registered User
Thread Starter
iTrader: (7)
Join Date: Oct 2006
Location: So.Cal 626 BP
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USN HM 350Z
no problem. hope it helps
#15
Registered User
iTrader: (2)
Join Date: Oct 2004
Location: Burbank, CA
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USN HM 350Z
search my posts for the stencil
edit: got it for you
https://my350z.com/forum/showthread.php?t=248806
edit: got it for you
https://my350z.com/forum/showthread.php?t=248806
#16
Registered User
iTrader: (9)
Join Date: Feb 2007
Location: Central Florida - Stationed VA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pooplet
hey bro the titek stencil blows ***. I cut it out exactly the way the stencil was and when I tried puting in the duct it didnt fit for crap. The hole was WAYYY too small . What I had to do was get a sheet of paper and keep trimming it untill it fits flush on the the backside of the duct. Tape it on aligned to the frame hole and just cut it out. Alot easier.
#18
Registered User
Join Date: Jun 2006
Location: Palm Desert, Ca
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
I just bought an air duct from the z store. i think its an evo-r. after reading about this and contiplating, i am getting cold feet, now i am not so sure about cuttng my bumper for baisically cosmetic reasons.
what do you guys think?
what do you guys think?
#19
Registered User
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
If the ducts weren't out of stock, I'd open one up and make a copy. Titek won't have any more for at least a couple of weeks. If you still need one when the new shipment comes in, I'll defintely get one for you.
#20
Registered User
iTrader: (7)
Join Date: Jan 2005
Location: riverside/san Bernardino CA
Posts: 1,514
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by lb's vq35
sounds good well ill see if i install it this weekend.........thanx a lol pooplet