When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Glad you had a good experience with WCN. I am a fan of that dealership.
You could always PM Jeff or Jenny and get a shipped quote from them..
Yup, for anyone else interested, you can PM Justin@WestCovinaNissan or Jeff@WestCovinaNissan and let them know Amit sent you! Though I think Jeff is in Cancun right now?
Originally Posted by los06z
I was there at the same time...just about 10:20am....but i didn't hang out at westco while they were servicing my car....I walked over to the german deli sandwhich shop....
Oh I see. They had a bunch of Z's there while I was getting my oil changed.
Originally Posted by JYear
These work on the G35 Coupe also right? Could I get a PM of the price.
Spray this on the nut, and let it penetrate. This stuff is awesome. I used in on all the bolts i needed to remove when replacing my shocks and springs yesterday. You should be able to get it at pep boys or autozone.
Spray this on the nut, and let it penetrate. This stuff is awesome. I used in on all the bolts i needed to remove when replacing my shocks and springs yesterday. You should be able to get it at pep boys or autozone.
Thanks for the suggestion. Is that better than WD-40? These nuts are probably torqued down at 100ft-lbs or something. The biggest problem I'm having is leverage due to space constraints (and crappy tools). But maybe the PB Blaster will work?
Thanks for the suggestion. Is that better than WD-40? These nuts are probably torqued down at 100ft-lbs or something. The biggest problem I'm having is leverage due to space constraints (and crappy tools). But maybe the PB Blaster will work?
In my experience is has been far superior to WD-40. I had a tough time breaking an inner nut off of the rear spring seat yesterday. After reaching at all kind of weird angles and hurting my back trying to get the the driver's side one off, I sprayed some PB Blaster on the passenger side and let it sit for 30 minutes.
It didn't exactly come off "easily", but the PB loosened it up noticeably.
