Where?
ROWLAND HEIGHTS, 91748

Exactly Where?
I'll be doing it at my HOUSE this time.. unless I can find a better place with better lighting to do it at, right now its looking like my house and we can BBQ

When?
Sunday, March 1st starting at 9:00AM until whenever.

We will be there (Dent guy, Fender Roller, I) as early as 9:00AM dents are FIRST COME FIRST SERVE! Course we're going to be reasonable and attach common sense to it.. I mean if you have a 2 hour job, please let the guy that has a 5min job go first.

Details
PDR aka Paintless Dent Removal, is done by poping the dents out fromt he inside after the panel has been properly preped. Its a skill that costs normally $125 for the 1st dent and on.. We get a group buy rate of starting

$60.00 REAR FENDERS
$40 FRONT FENDERS
$100 ALL 4 Cash!
Most shops I've seen charge $75-120 for fender rolling! This guys experienced and is bringing all his tools, only thing is we need to have +7-10 people signed up for this (shouldnt be a problem since we have both G and Z guys!

$65.00 PDR Cash! for 1 Panel up to 5 Dents per-panel. Addition charges for anything beyond 1 Panel. Once again please use common sense with this, if you have 5 bowling ball dents on your quarter panel then +$. $100 will take you a long way.. none of us should have to spend over $100 unless you spend your life in an Asian Plaza in San Gabriel.


Everyone please save my cell phone number, 626-636-6678! call me if you're lost or confused

Previous 03-09-08 G35 meet http://g35driver.com/forums/showthread.php?t=205841
Previous 03-24-08 350z/G35 Meet http://g35driver.com/forums/socal-me...per-panel.html

 

Before my post gets deleted, MODS please read. Just like all the times before last year I do not make any money outta this. It's just a good PDR guy that we have out for a good rate.. I usually only invite the G guys out but I've been getting CALLS from 350z guys for another DENT day

Sign up is MANDATORY! No sign up = No PM for the address, if it becomes a public location I'll post up the address

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

 

I'm down for Fender Rolling.

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2.

 

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2. 415mm dent/ fender rolling

 

so true...

 

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2. dent/ fender rolling
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)

 

BTW this dent guy is A+++++++++++ he rocked last years dent meets and even fixed the dents that werent fully taken out by other dent guys! haha

 

I might be in for some Fender rolling but need PDR!!! thank god i waited i had a quote for my rear quarter for 110.

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2. dent/ fender rolling
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)

 

In for the BBQ!

 

haha nice.. get down here rick! haha

hey I have prices for fender rolling
$60.00 REAR FENDERS
$40 FRONT FENDERS
$100 ALL 4 Cash!
Most shops I've seen charge $75-120 for fender rolling! This guys experienced and is bringing all his tools, only thing is we need to have +7-10 people signed up for this (shouldnt be a problem since we have both G and Z guys!

 

updated because i failed at adding my name
0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)

 

0. Klumzyee (Eric) / Dent & Rear Fender Rolling
1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll

 

1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll
6. Henry J/ rear fender roll


i have a friend with a supra, can he get in on this? (fender rolling)

 

1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll
6. Henry J/ rear fender roll
7.Zenpato- small dent on pass door / front driver side fender.

 

1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll
6. Henry J/ rear fender roll
7.Zenpato- small dent on pass door / front driver side fender.
8. booey1979-passenger side door dent (on crease line), and driver's side fender dent.

 

1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll
6. Henry J/ rear fender roll
7.Zenpato- small dent on pass door / front driver side fender.
8. booey1979-passenger side door dent (on crease line), and driver's side fender dent
9. Sponge / 3 small door dings and probably a rear fender roll

 

Just post exactly where the meet is going to be.

 

In for the dent removal

so i have 3 dents in total. two on pssenger side on the line and 1 on fender line

price?

 

1. Afkguy / Fender Rolling
2. 415mm dent/ fender roll
3. RRMikey / two small dents on passenger door (maybe fender roll, not sure yet)
4. OCTrackZ/ (another Eric) / Dents and most-likely fender roll)
5. Pearlwhite_z (Chris) / small dent and rear fender roll
6. Henry J/ rear fender roll
7.Zenpato- small dent on pass door / front driver side fender.
8. booey1979-passenger side door dent (on crease line), and driver's side fender dent
9. Sponge / 3 small door dings and probably a rear fender roll
10. TechnoBotz/ rear fender roll and maybe dent removal - pass door

 

sorry I'll be PMing everyone the address the last week of feb. location will not be posted in the open mainly because i need to know exactally how many people will be coming by and it'll be at my own house this time.

Before anyone asks why do it, its mainly for the G guys. I'm a big vendor on G35Driver =) but I open up the deal to everyone on the Z forums as well I get calls randomly for PDR prices or the number to my PDR guy all the time but he's $$ so if we can all save some $$ lets do it =) plus its always fun to just hang out and have a BBQ


- Eric