350z HR Clutch change
Thread Starter
Registered User
Joined: Sep 2012
Posts: 1
Likes: 0
From: SanDiego
350z HR Clutch change
So, Im new to the site and not a new Z driver however i am looking at a clutch change for the HR and it is not so cut and dry im hearing from others. I was wondering if anyone has tried this or know of a shop that wont charge a 1000 bucks to do so. I live in San Diego.
Registered User
Joined: Sep 2009
Posts: 2,335
Likes: 5
From: Georgia
A lot of the expense is in getting to the clutch. Get a copy of the service manual, and read through the procedure.
The flywheel may need to be replaced. Regrinding it is somewhat of a problem because of the dual-mass design.
The concentric slave cylinder needs to be replaced. The SM calls for it in the procedure for removing and installing the transmission. They have a history of problems, and you don't want to have to take the transmission back down to replace it later.
The flywheel may need to be replaced. Regrinding it is somewhat of a problem because of the dual-mass design.
The concentric slave cylinder needs to be replaced. The SM calls for it in the procedure for removing and installing the transmission. They have a history of problems, and you don't want to have to take the transmission back down to replace it later.
