*** Lowering Springs New Years Sale from Vivid Racing!!! ***
01-08-2011 | 09:45 PM
#1
Thread Starter
Sponsor
Vivid Racing
Vivid Racing
iTrader: (67)
Joined: Dec 2002
Posts: 4,078
Likes: 0
From: Gilbert,AZ
*** Lowering Springs New Years Sale from Vivid Racing!!! ***
Get rid of those hideous wheel gaps and also improve cornering with Lowering Springs!
Ksport GT lowering springs have been designed to give your car superior handling with an aggressive race look. Most other brands use a linear rate, but Ksport utilizes a progressive rate for several reasons. A progressive rate allows a plush comfortable ride under normal travel, but since the rate shifts higher during compression, it stops "body roll" during heavy braking, hard acceleration, or fast cornering. By lowering the center of gravity from OE height you dramatically improve performance and handling characteristics.
1.2" drop all around.
An Eibach Pro-Kit is designed to reduce the fender-well gap by safely lowering your vehicle, giving it a more attractive, sportier stance. The Pro-Kit is the perfect compliment to any vehicle, whether in stock form or fitted with a larger tire and wheel package. The Pro-Kit will set your vehicle off from others, giving it "The Look" you want.
The Eibach springs drop your 350Z 1inch in the front and rear.
H&R Sport Springs Nissan 350Z 03+
It's heat-treated twice, to realign the molecular structure for long term resilience. It is shot-peened, inside and out a process that extends the service life of the spring more than 200%. Each spring is pre-set (Super-BlokTM) a total of four times, to establish its final length, and tested for ride height and spring rate. It is then electrically-charged phosphate-coated, painted with a special polyurethane-epoxy powder coating and oven-cured to create a hard, corrosion-resistance shell. Lowers the 350Z 1.3 in the front and 1.0 in the rear.
Hotchkis Tuning Sport coils offer the performance you seek, and the comfortable ride you deserve. Made from cold wound silicon steel, our springs are linear rate, and are powder coated seabring silver.
- Front 9/16" (15mm) Drop
- 340 lbs/in Stock 310lbs/in
- Rear 3/4" (19mm) Drop
- 330 lbs/in Stock 350 lbs/in
Progress Sport Springs Nissan 350Z 02-08
Progress uses only certified high-tensile SAE spring wire materials. The springs are cold-wound on modern CNC coiling machines, then stress relieved, pre-set, and shot-peened for maximum durability.
Features:
•Front drop: 1.0" --- Rear drop: 1.0"
•Front rate: 425 lbs/in --- Rear rate: 385 lbs/in
•All spring kits are powdercoated metallic gray.
Skunk2 Lowering Springs Nissan 350Z 02-05
Features:
•CNC-Wound
•SAE9254V Spring Steel
•Shot Peen Stress Relieved
•Corrosion Resistant Powder Coating
•Excellent Ride Characteristics
•Significantly Increases Corner Grip
•Use With Stock or Aftermarket Wheels
•Set of 4
•Front Drop: 1.30" Rear Drop: 1.00"
Tanabe Normal Feeling NF210 Lowering Springs Nissan 350Z 03-07
Normal Feeling SUSTEC NF210 Normal Feeling is for those who wish to lower their vehicle, while maintaining the comfort of the stock suspension.
Specifications NF210 lowers the vehicle an average of 1 1/4~1 1/2in (30~40mm) without sacrificing the stock ride quality. This is achieved by raising the spring rate no more than 10% (when used with the recommended G-Tec Bump Stopper).
High Quality The ultra light-weight, ultra durable, ultra precise 210 series springs are created through Tanabe's newly developed shot-peen technology and state-of-the art German machinery. *G-Tec Bump Stopper included on certain applications.*
Springs Rates:
- Front 5.6 kg/mm, Rear 6.3 kg/mm
Height:
- Front: -1.2", Rear: -1.2"
Tein S.Tech Springs Nissan 350Z Z33 03+
Additional Features:
- Chrome Vanadium SAE9254V Construction
- Progressive Spring Rate Design
- Includes Silencer Rubber on certain applications
- Green Powder Coat Finish
- Developed to be used in conjunction with OEM or OEM replacement dampers
- 1-year Manufacturers Defect and Sag Warranty (Covers over 5mm sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting.)
Contents of Spring Kit:
- Individual Springs x 4
- Main Spring x 4
- Some applications include TEIN Silencer Rubbers
- Warranty Information and Bump Stop Reference Guide
- 2 TEIN Decals
Ride Height:
Front: -0.67"
Rear: -0.55"
Spring Rate:
Front: 390 lbs/in
Rear: 400 lbs/in
PM Me for Prices!!!
Ksport GT lowering springs have been designed to give your car superior handling with an aggressive race look. Most other brands use a linear rate, but Ksport utilizes a progressive rate for several reasons. A progressive rate allows a plush comfortable ride under normal travel, but since the rate shifts higher during compression, it stops "body roll" during heavy braking, hard acceleration, or fast cornering. By lowering the center of gravity from OE height you dramatically improve performance and handling characteristics.
1.2" drop all around.
An Eibach Pro-Kit is designed to reduce the fender-well gap by safely lowering your vehicle, giving it a more attractive, sportier stance. The Pro-Kit is the perfect compliment to any vehicle, whether in stock form or fitted with a larger tire and wheel package. The Pro-Kit will set your vehicle off from others, giving it "The Look" you want.
The Eibach springs drop your 350Z 1inch in the front and rear.
H&R Sport Springs Nissan 350Z 03+
It's heat-treated twice, to realign the molecular structure for long term resilience. It is shot-peened, inside and out a process that extends the service life of the spring more than 200%. Each spring is pre-set (Super-BlokTM) a total of four times, to establish its final length, and tested for ride height and spring rate. It is then electrically-charged phosphate-coated, painted with a special polyurethane-epoxy powder coating and oven-cured to create a hard, corrosion-resistance shell. Lowers the 350Z 1.3 in the front and 1.0 in the rear.
Hotchkis Tuning Sport coils offer the performance you seek, and the comfortable ride you deserve. Made from cold wound silicon steel, our springs are linear rate, and are powder coated seabring silver.
- Front 9/16" (15mm) Drop
- 340 lbs/in Stock 310lbs/in
- Rear 3/4" (19mm) Drop
- 330 lbs/in Stock 350 lbs/in
Progress Sport Springs Nissan 350Z 02-08
Progress uses only certified high-tensile SAE spring wire materials. The springs are cold-wound on modern CNC coiling machines, then stress relieved, pre-set, and shot-peened for maximum durability.
Features:
•Front drop: 1.0" --- Rear drop: 1.0"
•Front rate: 425 lbs/in --- Rear rate: 385 lbs/in
•All spring kits are powdercoated metallic gray.
Skunk2 Lowering Springs Nissan 350Z 02-05
Features:
•CNC-Wound
•SAE9254V Spring Steel
•Shot Peen Stress Relieved
•Corrosion Resistant Powder Coating
•Excellent Ride Characteristics
•Significantly Increases Corner Grip
•Use With Stock or Aftermarket Wheels
•Set of 4
•Front Drop: 1.30" Rear Drop: 1.00"
Tanabe Normal Feeling NF210 Lowering Springs Nissan 350Z 03-07
Normal Feeling SUSTEC NF210 Normal Feeling is for those who wish to lower their vehicle, while maintaining the comfort of the stock suspension.
Specifications NF210 lowers the vehicle an average of 1 1/4~1 1/2in (30~40mm) without sacrificing the stock ride quality. This is achieved by raising the spring rate no more than 10% (when used with the recommended G-Tec Bump Stopper).
High Quality The ultra light-weight, ultra durable, ultra precise 210 series springs are created through Tanabe's newly developed shot-peen technology and state-of-the art German machinery. *G-Tec Bump Stopper included on certain applications.*
Springs Rates:
- Front 5.6 kg/mm, Rear 6.3 kg/mm
Height:
- Front: -1.2", Rear: -1.2"
Tein S.Tech Springs Nissan 350Z Z33 03+
Additional Features:
- Chrome Vanadium SAE9254V Construction
- Progressive Spring Rate Design
- Includes Silencer Rubber on certain applications
- Green Powder Coat Finish
- Developed to be used in conjunction with OEM or OEM replacement dampers
- 1-year Manufacturers Defect and Sag Warranty (Covers over 5mm sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting.)
Contents of Spring Kit:
- Individual Springs x 4
- Main Spring x 4
- Some applications include TEIN Silencer Rubbers
- Warranty Information and Bump Stop Reference Guide
- 2 TEIN Decals
Ride Height:
Front: -0.67"
Rear: -0.55"
Spring Rate:
Front: 390 lbs/in
Rear: 400 lbs/in
PM Me for Prices!!!
Thread
Thread Starter
Forum
Replies
Last Post
