(OEM) FS/FT: Front and REar suspension with whiteline bushings
#1
Front and REar suspension with whiteline bushings
Front and Rear suspension with Whiteline bushings
For sale area full set of 350z front and rear suspension components with whiteline bushings already pressed in at $575.
Probably because of a past back injury, I thought they stiffened up the suspension somewhat too much for me.
Friends have informed me though that the whiteline bushings are comfortable for them and better than Energy Suspension from a comfort and quality point of view.
These bushings only have 2-3 weeks of use, therefore they are practically new.
You can easily swap out your suspension components with these without the cost, trouble, and time of pressing out your current bushings and pressing in new bushings.
Note, some of the bushings are a real challenge to press out and in on some of the components, especially in the rear spindle knuckle and control arms based on how the OEM bushings are designed with a flange on the outer edge.
Last edited by ZROCM; 02-17-2019 at 06:33 AM. Reason: payment method: Paypal to tommarshall1@twc.com
#2
Tried to reply. Not sure it was sent. I'm interested but not sure of your terms. Want to trade or sell? I have very low mileage OEM to trade. Thanks
Last edited by Steve Parsons; 02-17-2019 at 07:41 AM.
#3
New Member
iTrader: (1)
any chance you're willing to part just the compression arms? I have a 06 G35 and I think one of my compression arm bushings is done. I was looking to do something like this (buy aftermarket bushings and having them pressed in). I think the G35 and 350Z suspension parts are interchangeable....if you can provide a part # for them, I'll be willing to check.
Let me know.
Thanks,
- DM
Let me know.
Thanks,
- DM
Thread
Thread Starter
Forum
Replies
Last Post
Alicia21
Suspension
4
06-16-2016 03:59 PM
2fasst
Brakes & Suspension
15
06-16-2014 11:08 PM