[DFW]: DFW help! springmount mod and fender rolling!
#43
Registered User
iTrader: (12)
Join Date: Jul 2006
Location: Plano, TX
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Nice Jake! I like that pic of my bumper pretty much touching the floor lol. Good turnout last night, nice meeting everybody, and let's all do it again soon!
Btw, spacers are on the way!
Btw, spacers are on the way!
#45
Living in 350Z
iTrader: (64)
Did Sqeakys car last night
This is first time a car came to my house and got A RAISE...
Didnt go as aggressive on the roll but it still turned out great IMO..
I think I have 2 more coming over today...and thats it...no more cause I have to return "the tool"
I think Im going to buck up and just buy one - this is fun.. seeing all these agressive offsets...sitting fat...I likey...
BTW - his ROTA's looked SO DAMN GOOD...And they were light as a feather..
Didnt go as aggressive on the roll but it still turned out great IMO..
I think I have 2 more coming over today...and thats it...no more cause I have to return "the tool"
I think Im going to buck up and just buy one - this is fun.. seeing all these agressive offsets...sitting fat...I likey...
BTW - his ROTA's looked SO DAMN GOOD...And they were light as a feather..
#46
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: TEXAS
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
jake- doooo it buy a tool, shops charge 50 a fender lol you can charge 20 a fender and make your money back in a week or two..
AUSTIN- I just thought of something.. if you buy the spacers that bolt onto your studs and have their own studs you are probably going to have to grind down your rear studs unless you do over a 20mm spacer i beleive... what one did you buy?
AUSTIN- I just thought of something.. if you buy the spacers that bolt onto your studs and have their own studs you are probably going to have to grind down your rear studs unless you do over a 20mm spacer i beleive... what one did you buy?
#47
Living in 350Z
iTrader: (64)
jake- doooo it buy a tool, shops charge 50 a fender lol you can charge 20 a fender and make your money back in a week or two..
AUSTIN- I just thought of something.. if you buy the spacers that bolt onto your studs and have their own studs you are probably going to have to grind down your rear studs unless you do over a 20mm spacer i beleive... what one did you buy?
AUSTIN- I just thought of something.. if you buy the spacers that bolt onto your studs and have their own studs you are probably going to have to grind down your rear studs unless you do over a 20mm spacer i beleive... what one did you buy?
#48
Registered User
iTrader: (2)
Join Date: Sep 2008
Location: Moorhead, MN
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
I will probably stop by your house around the same time tonight. I fixed the clunking noise but I found another problem, I need to re-adjust the rear shocks. I am almost riding on the bump stops. I have about 1/2 inch of travel.
Also, what kind of screws should I bring. We could do the bumper tuck tonight as well.
Also, what kind of screws should I bring. We could do the bumper tuck tonight as well.
Last edited by Squeaky350; 01-21-2010 at 09:19 AM.
#49
Registered User
iTrader: (12)
Join Date: Jul 2006
Location: Plano, TX
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I got the Project Kics 10mm with the extended studs built-on.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
Last edited by AUS10TAT10US; 01-21-2010 at 09:26 AM.
#51
Living in 350Z
iTrader: (64)
I will probably stop by your house around the same time tonight. I fixed the clunking noise but I found another problem, I need to re-adjust the rear shocks. I am almost riding on the bump stops. I have about 1/2 inch of travel.
Also, what kind of screws should I bring. We could do the bumper tuck tonight as well.
Also, what kind of screws should I bring. We could do the bumper tuck tonight as well.
Screws should be self tapping screws (for sheet metal) - you get them at lowes or home depot (small bag should be like 1.99 - 3.99) I need a favor from you though - I dont have a nut driver for my drill - if you have one bring it or can you get one for me while your there? I will gladly pay you back for it.. OH AND GET WASHERS - nice round ones so it will look all baller..
The screws look like this
Last edited by AcidJake75; 01-21-2010 at 10:18 AM.
#52
Living in 350Z
iTrader: (64)
Hey guys, I got the Project Kics 10mm with the extended studs built-on.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
#53
New Member
iTrader: (41)
Hey guys, I got the Project Kics 10mm with the extended studs built-on.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
Let me know when you guys are done with the fender roller or are yall done already? Jake, I may just sell that fender roller to you bc my friend doesn't care to have it back lol he said I can just keep it if I want. He has a few lol.
#56
Registered User
iTrader: (2)
Join Date: Sep 2008
Location: Moorhead, MN
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
ok - I have one guy coming over for the fender action and Squeaky - you already know Im down for you to borrow my tools and what not..
Screws should be self tapping screws (for sheet metal) - you get them at lowes or home depot (small bag should be like 1.99 - 3.99) I need a favor from you though - I dont have a nut driver for my drill - if you have one bring it or can you get one for me while your there? I will gladly pay you back for it.. OH AND GET WASHERS - nice round ones so it will look all baller..
The screws look like this
Screws should be self tapping screws (for sheet metal) - you get them at lowes or home depot (small bag should be like 1.99 - 3.99) I need a favor from you though - I dont have a nut driver for my drill - if you have one bring it or can you get one for me while your there? I will gladly pay you back for it.. OH AND GET WASHERS - nice round ones so it will look all baller..
The screws look like this
Just spent about three hours cleaning the car. I love this weather.
#57
Living in 350Z
iTrader: (64)
Awesome on the drivers man.. much appreciated... your car will go quick too since its just the rears you have to play with.. bumper tuck is going to look SHWEEEET!
#60
Living in 350Z
iTrader: (64)
I hope the pics turn out ... Thanks for the extra set of drivers. Your bumper tuck turned out awesome. also take out the heat shield in the rear...looks much cleaner. Hope you have fun in COLORADO..take pix of that 4X4 action.
This one works just fine..
Today is the first day Im free this week - its been fun working on so many Z's...Did another fender roll last night - posting pics of that after lunch. Shiet turned out so good..