Software/firmware version 2.00 is out. I haven't tried it out yet, it looks like there is some minor functionality changes and improvements but I'm uncertain as of right now.

www.mohdparts.com

 

Like?

 

sorry I posted this right before I had to run off to a meeting

I saw some (translated) improvements listed at emanageforums.com

≪ Advanced Capability ≫

Water temperature ignition addition of revision and setting.
Inhalation warm ignition addition of revision and setting.
Data addition of taking MAP.


≪ functional additional ≫

Rotary adding 1/2, 1/3, 1/4 and 1/6 to recognition of the signal.
Engine type Universal (general purpose) addition.
[enjinsutoru] adding water temperature to operation condition of prevention and setting.
Analog adding the pressure indication of the genuine pressure sensor connected time to input.
Correspondence of knocking level indication with logger.
I/J adding the fuel pump to relay item inside the tub.
Adding selection possible MAP with the DIP SWITCH of front panel.
Adding the sensor manufacturer of the A/F meter to OPTION1,2 of front panel.
Adding MAP changing performance to the external switch of front panel.
Adding the addition sticking in MAP and the setting picture.
Ultimate adding the automatic 2 division indications of the window and the data logger.
Parameter adding printing the setting.
Adding the logger trace with of cursor B.
Adding the line movement with the left and right button with [rogatoresu].
[rogatekisutohuairu] writing out adding the rpm every writing out to function.


≪ functional correction ≫

Setting setting the idea contest to the file and the logger file.
Starting with [daburukuritsuku].
Engine beginning improvement of kinesis.
Acceleration injector modifying the control of revision MAP.
Acceleration modifying the control of ignition and revision MAP.
[reburimitsutakatsuto] modifying the control of setting.
Acceleration injector mark modification of revision.
Acceleration mark modification of ignition and revision MAP.
Parameter mark modification of setting.
Each MAP, correcting the operation when protect setting it does to setting.
I/J invalid injection mark of time modification and operation correction.
Modifying the printing indication of the logger.
Rotary E/G addition of logger indicatory item when selecting.

 

bump for anyone who is interested

 

Im more interested in a bas Fuel map that I can load. so I can drive my car to get it tuned

 

Dam they skipped out on the manual timming instead of the +1's to the signal!!!!

 

I like the log map they added.

Its pretty cool, you can pick what you want to log A/F pressure etc... and run you car up... it will show you where on the map you were and what your data was.

I'm running 2.0 now... The map addition is my fave..

 

Seems Ver 2.11 has been pulled, wonder what the problems were with that?