HR - Aftermarket Clutch & Flywheel
The following users liked this post:
PP08HR (11-19-2016)
The following users liked this post:
PP08HR (11-19-2016)
#307
Which combo do you guys recommend for 08 HR track car with OS Giken 1.5 and 3.9 FD?
I should probably not go for THE lightest flywheel available or should I?
Also, my clutch pedal does not go back to the top position as quickly and strongly as it used to. Might this be a sign of the CVC going? Do I buy it seperatly or does it already come with aftermarket clutches?
I should probably not go for THE lightest flywheel available or should I?
Also, my clutch pedal does not go back to the top position as quickly and strongly as it used to. Might this be a sign of the CVC going? Do I buy it seperatly or does it already come with aftermarket clutches?
Last edited by GodISmE; 03-10-2017 at 05:28 AM.
#310
Vendor - Former Vendor
iTrader: (71)
These are very durable kits for track, Will have some trans gear rattle at idle and low rpm as any kit with solid flywheel and non-quiet type clutch but will take whatever you can throw at it. Triple strapped plate design, SFI Certified disk and pressure plate, we use a non marcel racing organic disk with these for long life, Very clean clutch release for fast shifts and very manageable.
Clutch + Cmak
http://www.zspeedperformance.com/ZSP...SPSTG2-SFI.htm
Clutch + CMAK + Flywheel, I would recommend the 17 or 19lb flywheel.
http://www.zspeedperformance.com/ZSP...STG2SFIFly.htm
Last edited by ZSpeedPerformance; 01-30-2019 at 05:53 AM.
#312
Vendor - Former Vendor
iTrader: (71)
Well the only way you can get that light is an aluminum inserted flywheel that will eventually have parts come off of it and most likely a warped insert after some heat. I would highly not recommend that for a track car. 3lbs in exchange for durability is worth it to me, just a few less cheeseburgers...
Last edited by ZSpeedPerformance; 03-10-2017 at 07:24 AM.
The following users liked this post:
NA&CH (04-03-2017)
#313
Registered User
I installed a JWT and CMAK and the latter works flawlessly, the JWT is aluminum so I hope it won't separate. I love how faster it revs now.
#314
New Member
iTrader: (3)
ZSpeed Stage 2 +
These are very durable kits for track, Will have some trans gear rattle at idle and low rpm as any kit with solid flywheel and non-quiet type clutch but will take whatever you can throw at it. Triple strapped plate design, SFI Certified disk and pressure plate, we use a non marcel ACT steel backed organic disk with these for long life, Very clean clutch release for fast shifts and very manageable.
Clutch + Cmak
http://www.zspeedperformance.com/ZSP...SPSTG2-SFI.htm
Clutch + CMAK + Flywheel, I would recommend the 17 or 19lb flywheel.
http://www.zspeedperformance.com/ZSP...STG2SFIFly.htm
These are very durable kits for track, Will have some trans gear rattle at idle and low rpm as any kit with solid flywheel and non-quiet type clutch but will take whatever you can throw at it. Triple strapped plate design, SFI Certified disk and pressure plate, we use a non marcel ACT steel backed organic disk with these for long life, Very clean clutch release for fast shifts and very manageable.
Clutch + Cmak
http://www.zspeedperformance.com/ZSP...SPSTG2-SFI.htm
Clutch + CMAK + Flywheel, I would recommend the 17 or 19lb flywheel.
http://www.zspeedperformance.com/ZSP...STG2SFIFly.htm
Is the CMAK mod reversible?
#319