Notices
VQ35HR Mods and Support related to the 2007/08 High Revving VQ

Car wont stay running.

Thread Tools
 
Search this Thread
 
Old Jan 18, 2017 | 03:07 PM
  #1  
lolgilly's Avatar
lolgilly
Thread Starter
Registered User
 
Joined: Jan 2017
Posts: 1
Likes: 0
From: Texas
Default Car wont stay running.

08 350z car turns on but struggles. After turning on idles poorly then dies after 5 seconds. (Gas pedal doesn't work) Checked obd scanner codes are P0123 P0223 which are for both throttle bodies. I then checked the fuel pump to see if it was pumping which it is. Checked injectors which do spray as well. I also saw two gas line connected to the intake manifold that are very close to the throttle bodies and poured gas into it to see if it would idle better. On the driver side I poured some and it didn't make a difference then I poured some into passenger side and all of a sudden i could accelerate the car but it didn't accelerate to its full potential. The gas pedal accelerated to around 3k rpm but once I stopped giving it gas i tried to accelerate and it didn't work. Any idea ? Thanks !
Reply
Old Jan 18, 2017 | 05:06 PM
  #2  
Conway_160's Avatar
Conway_160
New Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2012
Posts: 2,588
Likes: 354
From: Pan Handle
Default

Reset your ECU and see if that fixes anything.
Reply
Old Dec 10, 2018 | 11:49 PM
  #3  
Oliver_350z's Avatar
Oliver_350z
Registered User
 
Joined: Dec 2018
Posts: 4
Likes: 0
From: California
Default

Same problem clean MAF
Reply
Old Dec 11, 2018 | 04:17 AM
  #4  
travlee's Avatar
travlee
Master
Premier Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jul 2011
Posts: 49,721
Likes: 9,296
From: Texas
Default

Originally Posted by Oliver_350z
Same problem clean MAF
almost 2 year dead thread bump
Reply




All times are GMT -8. The time now is 05:50 AM.