Preferrably with 18x9.5", +30 offset on all four corners?

 

What are you looking to have answered? Yes, that setup will fit.

 

Just wanted to know if they'll clear the front Brembo's. Sorry about not making that clear.

 

I have a contact that I have gotten a Z owner or two a set of them through and from what I know, they do clear brembos

 

Thanks VERY much for the info.

 

if it doesn't fit you can always get 5-10mm spacers, i recommend h&r spacers.

even if they do clear i think you should get 10mm spacers anyways, would make it look better.

 

Wouldn't the 10mm spacer push the wheel out too far? Especially with a +30 offset?

 

I doubt it since there are people running offsets lower than +20 on even wider wheels. You may want to wait until you get your wheels to decide how many mm. spacers you should get. But check out that offset calculator in your other thread. It's very useful.

 

Thanks much again.

 

From the information I've found, the 17" will clear the Brembo's. 18" in +30 or +20 offsets haven't the slightest issue.

 

Nope i have the 30's all around
thats pretty much our stock offset..they do throw out the rears by 3mm..nothing noticable but they will clear BBK's.