Best concave rims?
Originally Posted by Resolute
The Z06 competing in the USCC has a set in black. Very nice.
PIAA makes a similar wheel in forged aluminum...I wouldn't really consider them concave though:
Originally Posted by 350Zenophile
Saw that. Those rims and that car are sick. 295's on the front!!!
PIAA makes a similar wheel in forged aluminum...I wouldn't really consider them concave though:
PIAA makes a similar wheel in forged aluminum...I wouldn't really consider them concave though:
Registered User
Joined: Mar 2003
Posts: 568
Likes: 0
From: Minneapolis
Originally Posted by Resolute
Those 5-spoke Advans are friggin' sweet. I dig the Prodrive GC-05's the best, and would love to own a set of those in flat black. This is a nice thread. I love the concave rims better than deep dish wheels. Personally, a set of BBS forged Magnesium RE in flat black would be ideal (if I were made of money): http://www.bbs-usa.com/index.php?id=321
The Z06 competing in the USCC has a set in black. Very nice.
Will
The Z06 competing in the USCC has a set in black. Very nice.
Will
Originally Posted by redlude97
Enkei NT03+M?
as for the AME FS01, i would absolutely love this wheel if the concavity started closer to the edge of the wheel. I once saw a custom made pair of BBS RK's that the concavity was extreme, and the concavity started nearly at the edge, with a gradual fall into the lug crater. Wish i could find a picture of them
Very interesting. Did a search and didn't come up with much other than a couple of old threads on their weight (seemed to range from 22-27lbs fwiw - not sure on the diam/width/offset). Any more info? Any pictures on a Z?
they would be wrong. CST Aka Mb Battles will be 21-22. too bad you cant find 18x95+23 offsets in the MB badging, for $600, I'd be ALL over that. They are both made by Atech, great quality wheels for the money
It doesn't look like these come in aggressive width or offsets (none that would suit the Z anyway). So the offset/width of the wheels in the picture are 18x95+23?
alittle googling indicates that the concave shown above is only on +23 and +15 wheels. supposedly identical for those offsets. but those are probably +15. Regardless, for some reason +23 and +15 are rare to find, I dont know why DTD wouldnt sell them... they would move like hotcakes. the other offsets look like Motegi FWD wheels *barf*
alittle googling indicates that the concave shown above is only on +23 and +15 wheels. supposedly identical for those offsets. but those are probably +15. Regardless, for some reason +23 and +15 are rare to find, I dont know why DTD wouldnt sell them... they would move like hotcakes. the other offsets look like Motegi FWD wheels *barf*