...........

 

looks great.. always loved the professors..

 

specs?!?

 

very nice.

 

Damn Status...one of the cleanest nicest G35 i have seen so far, love the offset.


Thinking about Royal's idea of getting some small spacers (5mm) & hit-9 make the fronts go out some more and slamming the front now that fenders are rolled and rears are pulled. D&G35 has some so i might do some testing. I'll post some pics once i try it

 

Thanks, they are
19x11 -1 255 35 19
19x10 +6 235 35 19 falkens

 

possible new setup...

19x10 -13 (5.3 inch lip) and going to add a 10mm spacer for around 19x10 -23
19x10 -8 (5.3 inch lip) and going to add a 5 mm spacer for around 19x10 -13

215/35
225/35

Reason for the spacer is cuz thats the most aggressive sizes offered.

This should be about a little less than my 18x10 -25 and 18x11 -17 setup as far as width goes since my fenders are pulled/worked for it.

So using my calculator.... 11 inch -17 = 10 inch -28 = 12 inch -2...

Soooo...with my 10 inch -23 in the rear ill still be dancing around a 12 inch rim fitment..

And for those wondering...19x12 -35 (blue G) is equivalent to a 19x14 -6.

Ballin..

Opinions/advice?

 

^hmm pretty damn aggressive if you ask me lol. WHy are you going with a wider tire out back? And which rims you thinking of getting? is it a secret? cant wait to see this

 

Ya I could have run a 14" width wheel in the rear with a -7 offset... it would have given me the same lip size though.

Keep me updated Lixam.. sounds like you've got some badass things planned out. Just make the car fit the wheels What it's all about.

 

not a crazy secret or anything super crazy jdm wait 5 months type wheels.. but they are gonna give the car a whole new look and ive never really seen them rocked to this extremity..the goal is finding those sizes though lol.

right on man...my fenders are already pulled to fit 12 inch wide's all around but my budget isnt quite there to buy LXZ type new wheels yet... so im working with around a 2-2.5k budget with as much lip/polish as i can get :P

...hopefully my new aero/wheel setup will be alot classier/vip/blingish..while keeping the aggressive Z'ness...

your G is by far my favorite by the way. toby...ill be out of commision for a little bit but its for the better! keep it down for east coast please!

 

Hey fellas wuz up just bought my wheels Lehrmeisters 18x10.5 -7 and 18x11 -13 and I plan on running 225/40 and 245/40 what do you guys think????? I'm running coilovers and sitting low but not as much as others but I plan on going lower.....

 

I think lixam loooves that calculator.



...so where did you find it? And what are you going to do with your current wheels? sale?

 

nice biggie...i saw those for sale. Get them bishes mounted man!

 

I would recomend doing at least a 255/40/18 for the rear. I ran a similar set-up on my s13 but my rears were 18x12 and I did a 275/40/18 and it stretched alot more than you would think it would. I can post pics if your interested.

 

I think hes better off with the 245 IMO

 

Id be more worried about the front lol....

 

go with a 235/40 on the rear.. you wont regret it..im at a 245/40 on my 11 -17 and i wish i could go 235..depends on how low your goin.

 

I think the front fenders with a nice roll and pull would be good to go.

 

Status One, rolling shot is $$$$$$!!!

 

New bumper installed, fitment was really close just a couple of areas to adjust and may need fender blending later cause fresh PPW paint allowed me to see how the sun has dyed the rest of my car lol.

<a href="http://s50.photobucket.com/albums/f311/oneandonly5680/?action=view&current=DSCN1722.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f311/oneandonly5680/DSCN1722.jpg" border="0" alt="Photobucket"></a>
<a href="http://s50.photobucket.com/albums/f311/oneandonly5680/?action=view&current=DSCN1714.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f311/oneandonly5680/DSCN1714.jpg" border="0" alt="Photobucket"></a>
<a href="http://s50.photobucket.com/albums/f311/oneandonly5680/?action=view&current=DSCN1712.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f311/oneandonly5680/DSCN1712.jpg" border="0" alt="Photobucket"></a>
<a href="http://s50.photobucket.com/albums/f311/oneandonly5680/?action=view&current=DSCN1709.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f311/oneandonly5680/DSCN1709.jpg" border="0" alt="Photobucket"></a>
<a href="http://s50.photobucket.com/albums/f311/oneandonly5680/?action=view&current=DSCN1707.jpg" target="_blank"><img src="http://i50.photobucket.com/albums/f311/oneandonly5680/DSCN1707.jpg" border="0" alt="Photobucket"></a>