front wheels, +15 with 9.5", 245/35/19, 1.2" drop, roll or not needed?
front wheels, +15 with 9.5", 245/35/19, 1.2" drop, roll or not needed?
getting some spacers put on this weekend. i know the rears are going to be rolled but will the fronts need to be? +30 with 15mm spacers, 9.5" wheel, 245/35/19 and 1.2" drop.
Originally Posted by InZomniac
Cant really roll the fronts. They come "rolled" from the factory.
It will fit, but you may need to add some neg camber.
It will fit, but you may need to add some neg camber.
Originally Posted by InZomniac
Cant really roll the fronts. They come "rolled" from the factory.
It will fit, but you may need to add some neg camber.
It will fit, but you may need to add some neg camber.
OP, you can see (somewhat) in this picture where the front fender starts to "roll," about three inches above the screws securing the black inner fender wall lining.
You are going to love the spacers. I sometimes wish I would of got a 15mm spacer in the front. That would of put them at a +15, instead of +20. Which isn't to bad at all on my 19X9. It's my wide front clip (not widebody) that makes them look ever so slightly set in.
Thread
Thread Starter
Forum
Replies
Last Post
abarclay
South East Marketplace
8
Sep 21, 2015 01:55 PM
