Picked up another set of wheels for the 350z JDM FTW!
Thread Starter
Registered User
iTrader: (6)
Joined: Oct 2009
Posts: 116
Likes: 0
From: Bowling Green,KY
one of the wheels had a few problems:
One- the lubricant inside the spokes was drained.
Two- The valve stem was not seated properly and the rubber seal was not seating properly which is why when it was cold the owner would hear a "click" and when its warm he wouldnt hear anything at all.
Three- the inside of the wheel where it mounts was worn and needed to be reground at a shop.
One- the lubricant inside the spokes was drained.
Two- The valve stem was not seated properly and the rubber seal was not seating properly which is why when it was cold the owner would hear a "click" and when its warm he wouldnt hear anything at all.
Three- the inside of the wheel where it mounts was worn and needed to be reground at a shop.
Thread
Thread Starter
Forum
Replies
Last Post
azndoc
Wheels Tires
4
Oct 10, 2015 02:59 PM
VQA33
Wheels Tires
8
Sep 8, 2015 08:30 PM
