Forgestar New F14 Super Deep Concave
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Everybody said it wasnt possible, but heres our 2015 Mustang GT PP customer running a set of Bronze Burst 20x10.5 square F14s with Super Deep Concave rears and deep concave fronts!
As far as I know, this is the first new Mustang in the world to run the super deep concave!
Tire widths aren't going to be maxed out since the more aggressive SDC fitment needs a slight stretch, but not a lot
We're currently working on a pair of 20x12 SDC for the rear so we'll see how that works!
Contact me at Jason@GetYourWheels.com with any questions or interest!
As far as I know, this is the first new Mustang in the world to run the super deep concave!
Tire widths aren't going to be maxed out since the more aggressive SDC fitment needs a slight stretch, but not a lot
We're currently working on a pair of 20x12 SDC for the rear so we'll see how that works!
Contact me at Jason@GetYourWheels.com with any questions or interest!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Heres a meaty Forgestar setup we did for our 370Z customer that I didnt think would fit but it did!
F14 20x9.5/11 with 265/35 325/30 Michelin Pilot Sport Cup 2s!
F14 20x9.5/11 with 265/35 325/30 Michelin Pilot Sport Cup 2s!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
We just had the pleasure of installing a set of Gloss White 19x9.5 deep concave Forgsetar CF10s on our customer's S3 on air!
Ride height:
Aired Out:
Very unique color combo, it works great with the green!
Ride height:
Aired Out:
Very unique color combo, it works great with the green!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Got a car that needs a high offset? Then Super Deep won't be an option for you but at least you can get some cool finishing done on these! Check out this Polished Monaco Copper set we did for a Corvette C7 Z06.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Forgestar CF5V is also offered in a Super Deep Concave! Check out this one done in a Bronze Burst finish. Although it isn't a Super Deep Concave, gives you guys some idea for a new wheel setup!
Available sizes in the offsets offered!
SEMI CONCAVE
19×8.5 offsets from +10 to +54
19×9.0 offsets from +12 to +60
20×9.0 offsets from +12 to +59
DEEP CONCAVE
19×9.5 offsets from -2 to +48
19×10 offsets from +4 to +54
19×11 offsets from +17 to +67
19×12 offsets from +30 to +74
20×9.5 offsets from +5 to +52
20×10.5 offsets from +17 to +63
20×11 offsets from +24 to +71
20×12 offsets from +36 to +83
SUPER DEEP CONCAVE
19×9.5 offsets from -25 to +25
19×10 offsets from -19 to +30
19×11 offsets from -6 to +40
19×12 offsets from +6 to +53
Available sizes in the offsets offered!
SEMI CONCAVE
19×8.5 offsets from +10 to +54
19×9.0 offsets from +12 to +60
20×9.0 offsets from +12 to +59
DEEP CONCAVE
19×9.5 offsets from -2 to +48
19×10 offsets from +4 to +54
19×11 offsets from +17 to +67
19×12 offsets from +30 to +74
20×9.5 offsets from +5 to +52
20×10.5 offsets from +17 to +63
20×11 offsets from +24 to +71
20×12 offsets from +36 to +83
SUPER DEEP CONCAVE
19×9.5 offsets from -25 to +25
19×10 offsets from -19 to +30
19×11 offsets from -6 to +40
19×12 offsets from +6 to +53
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Got this Forgestar CF10 done for a customer's Corvette C6! Gloss Brushed Clear always looks great on the CF10. Really brings out the wheel design.
Sizes available are as follows.
SEMI CONCAVE
19×8.5 offsets from +14 to +52
19×9.0 offsets from +20 to +60
20×9.0 offsets from +16 to +56
21×9.0 offsets from +0 to +42
21×10 offsets from +13 to +55
21×10.5 offsets from +20 to +60
21×11 offsets from +26 to +68
DEEP CONCAVE
19×9.5 offsets from +2 to +42
19×10 offsets from +8 to +48
19×11 offsets from +21 to +61
19×12 offsets from +34 to +74
20×9.5 offsets from +7 to +48
20×10.5 offsets from +20 to +61
20×11 offsets from +27 to +67
20×12 offsets from +40 to +80
Sizes available are as follows.
SEMI CONCAVE
19×8.5 offsets from +14 to +52
19×9.0 offsets from +20 to +60
20×9.0 offsets from +16 to +56
21×9.0 offsets from +0 to +42
21×10 offsets from +13 to +55
21×10.5 offsets from +20 to +60
21×11 offsets from +26 to +68
DEEP CONCAVE
19×9.5 offsets from +2 to +42
19×10 offsets from +8 to +48
19×11 offsets from +21 to +61
19×12 offsets from +34 to +74
20×9.5 offsets from +7 to +48
20×10.5 offsets from +20 to +61
20×11 offsets from +27 to +67
20×12 offsets from +40 to +80
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Another set of Forgestar M14 coming through our doors and this time, built for a widebody Scion FR-S! These wheels are pretty cool with the color combinations people come up with. This one below is built with standard finishes with Textured Gunmetal center and Polished lip!
18" available from 8.0 to 14 inch widths
19″ available from 8.0 to 12.5 inch widths
- ROTARY FORGED CENTER AND INNER BARREL
- FORGED ROLLED LIP
18" available from 8.0 to 14 inch widths
19″ available from 8.0 to 12.5 inch widths
- ROTARY FORGED CENTER AND INNER BARREL
- FORGED ROLLED LIP
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Got some Forgestar orders in today and this is just only a little of what we got!
Also got in some Textured Black, Flat Black, and Matte Gunmetal in today but didn't get a chance to grab those photos.
Also got in some Textured Black, Flat Black, and Matte Gunmetal in today but didn't get a chance to grab those photos.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Need something different and unique? Check out this Forgestar F14 we did in a Gloss Prism Purple finish! Looks even cooler if a matte top coat was shot over this.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Had the opportunity to help out this customer get fitted with a set of Forgestar CF10 for an OEM+ fitment! Customer wanted a set that was able to clear his brake caliper and be like an OEM fitment and I can say we definitely achieved that.
Check out that brake clearance!
19X9 ALL AROUND
Check out that brake clearance!
19X9 ALL AROUND
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Forgestar F14 in the Super Deep Concave setup done in a Polished Clear finish for a customer! We try not to do these finishes since they bring out minor casting errors here and there but when they're good, they look so good!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Another all around Super Deep Concave setup we got done for this beautiful 50th Anniversary 2015 S550 Ford Mustang with the Forgestar F14 finished in a Gloss Bronze Burst.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Polaris Slingshots are definitely an interesting vehicle! We helped out a customer get setup with a new fatty rear with Forgestar F14 in Matte Black in 20x12 with 345 wide tires! Check out that meat!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Got ourselves another Forgestar M14 order but this time with Gloss Bronze Burst center with Polished lips! This setup is built for a 370z with sport calipers in 18x9.5 and 18x10.5!
18X9.5 is on the Left
18x10.5 is on the Right
Definitely a more realistic look at these wheels where widebody isn't at play here.
18X9.5 is on the Left
18x10.5 is on the Right
Definitely a more realistic look at these wheels where widebody isn't at play here.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
The all new Forgestar S18!! We've gotten a couple order of these new wheels and this is the first one of many to come out! This set we got done in the Gloss Brushed Clear for an Audi! Available sizes listed below.
SEMI CONCAVE
19×8.5 offsets from +6 to +52
19×9.0 offsets from +12 to +58
DEEP CONCAVE
19×9.0 offsets from -8 to +38
19×9.5 offsets from -2 to +45
19×10 offsets from +4 to +52
19×11 offsets from +17 to +65
19×12 offsets from +30 to +78
SEMI CONCAVE
19×8.5 offsets from +6 to +52
19×9.0 offsets from +12 to +58
DEEP CONCAVE
19×9.0 offsets from -8 to +38
19×9.5 offsets from -2 to +45
19×10 offsets from +4 to +52
19×11 offsets from +17 to +65
19×12 offsets from +30 to +78
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Always nice to see our customers giving us a nice shout-out! A great OE+ setup done on this S4 without the need to go so low or any other suspension mods to help with clearance issues.
Originally Posted by jak77
Wanted to finally post up and share some pictures of my 2014 B8.5 6MT. Bought this used in January with 23k on the odo. Has B&O, sport diff, nav.
I worked with Jason and his crew at GetYourWheels to get Forgestar F14s (19x9.5 et40) in matte gunmetal w/PSS (255/35/19) installed on my B8.5 about 10 days ago. I have to say I am extremely pleased how it all turned out, and it was a pleasure working with them. They were definitely accommodating to me and my hectic work schedule to get me in and install the new shoes. I highly recommend them if you're looking for some new wheels.
Also, a shout out to Josh there who took these excellent photos. By far the best pictures I have of my car.
Other mods so far: ECS Full carbon intake system, RS4 grille, Milltek non-res, tint and vinyl wrap window trim. I have a B12 kit and 034 RSB waiting to be installed. The B12 should take away some of that wheel gap. Tune to come in a couple months.
Now on to the photos!
I worked with Jason and his crew at GetYourWheels to get Forgestar F14s (19x9.5 et40) in matte gunmetal w/PSS (255/35/19) installed on my B8.5 about 10 days ago. I have to say I am extremely pleased how it all turned out, and it was a pleasure working with them. They were definitely accommodating to me and my hectic work schedule to get me in and install the new shoes. I highly recommend them if you're looking for some new wheels.
Also, a shout out to Josh there who took these excellent photos. By far the best pictures I have of my car.
Other mods so far: ECS Full carbon intake system, RS4 grille, Milltek non-res, tint and vinyl wrap window trim. I have a B12 kit and 034 RSB waiting to be installed. The B12 should take away some of that wheel gap. Tune to come in a couple months.
Now on to the photos!
