Forgestar New F14 Super Deep Concave
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
More Super Deep Concave
http://www.flickr.com/photos/getyourwheels/8406464156/http://www.flickr.com/photos/getyourwheels/8406464156/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/8406465110/http://www.flickr.com/photos/getyourwheels/8406465110/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/8405375423/http://www.flickr.com/photos/getyourwheels/8405375423/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/8406464156/http://www.flickr.com/photos/getyourwheels/8406464156/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/8406465110/http://www.flickr.com/photos/getyourwheels/8406465110/ by http://www.flickr.com/people/getyourwheels/, on Flickr
http://www.flickr.com/photos/getyourwheels/8405375423/http://www.flickr.com/photos/getyourwheels/8405375423/ by http://www.flickr.com/people/getyourwheels/, on Flickr
SO there are three "Face depths" of the F14, right? Norm, deep, and supa deep?
SO to ensure accurate fitment one could take the "Face depth" then add to the back of the hub mounting surface....this would give the offset.
I've seen offset diagrams with explanations BUT since the face depth is fixed depending on which of the three depths you choose.....adding to the back of the mounting surface is really the only customization possible. Right?
Not trying to be a douche and yes my terminology may be incorrect.....but I have gotten conflicting info from forgestar on recommended offsets.
Thanks
SO to ensure accurate fitment one could take the "Face depth" then add to the back of the hub mounting surface....this would give the offset.
I've seen offset diagrams with explanations BUT since the face depth is fixed depending on which of the three depths you choose.....adding to the back of the mounting surface is really the only customization possible. Right?
Not trying to be a douche and yes my terminology may be incorrect.....but I have gotten conflicting info from forgestar on recommended offsets.
Thanks
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Actually taking away from the back pad is the only modification on the forgestars that can be done.
The norm. set up on a 350 will be deep front and super deep rear
The norm. set up on a 350 will be deep front and super deep rear
More Super Deep Concave

photo 3 by GetYourWheels.com, on Flickr

photo 2 by GetYourWheels.com, on Flickr

photo 1 by GetYourWheels.com, on Flickr

photo 3 by GetYourWheels.com, on Flickr

photo 2 by GetYourWheels.com, on Flickr

photo 1 by GetYourWheels.com, on Flickr
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
The offset is not going to change the concavity of the wheel.
THe 19x9.5 SDC no matter what offset range will be the same.
All the Super Deep Concave will be the same depth. No matter what width.
THe 19x9.5 SDC no matter what offset range will be the same.
All the Super Deep Concave will be the same depth. No matter what width.
Are these avail for pick up? Will they fit over big brakes?
Price please for SUPER DEEP CONCAVE 19X9.5 +20 19X10 AND 11+25 gunmetal.
shipping to 91765 (if pick up is not avail)
thanks.
Price please for SUPER DEEP CONCAVE 19X9.5 +20 19X10 AND 11+25 gunmetal.
shipping to 91765 (if pick up is not avail)
thanks.
Last edited by gargoyleZ; Feb 4, 2013 at 08:42 PM. Reason: more.info
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Good eye, they are just the regular concave. The color was mainly the reason I posted these as we see a lot of black and silver, but not too many people going for a nice gold anymore.
Joined: Jan 2004
Posts: 7,175
Likes: 132
From: Florida
Chris
Last edited by NA&CH; Apr 3, 2013 at 01:11 PM.








