*GetYourWheels* Shipment Of The Day Showroom
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Many have been asking for completed photos of the new Alpha Forged wheel, well the first photos are finally available!
Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it!
Also shown is the Titanium hardware which is a standard feature!



Some asked for photos of the back of the wheel, so here it is:

You can see the pocketing on the back to shave off as much weight as possible
This center weighs only about 7.8 pounds!
Some additional info on the Titanium Hardware that comes standard with Alpha Forged:
Weight of the normal steel bolt and nut: 0.8 OZ

Weight for the Titanium bolt and nut: 0.4 OZ

Thats half the weight!
Multiply that by 40 bolts = 16 oz
Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center.
We are still looking for partial sponsorship cars to run these, so contact me sponsorship information!
Centers have brushed faces and polished windows, with a matte dark tinted (DDT) powdercoat over it!
Also shown is the Titanium hardware which is a standard feature!



Some asked for photos of the back of the wheel, so here it is:

You can see the pocketing on the back to shave off as much weight as possible
This center weighs only about 7.8 pounds!
Some additional info on the Titanium Hardware that comes standard with Alpha Forged:
Weight of the normal steel bolt and nut: 0.8 OZ

Weight for the Titanium bolt and nut: 0.4 OZ

Thats half the weight!
Multiply that by 40 bolts = 16 oz
Thats a savings of 1 lb per wheel, not the biggest difference, but all the weight savings is around the edge which is more beneficial than weight saved towards the center.
We are still looking for partial sponsorship cars to run these, so contact me sponsorship information!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
19x9 19x12 F310s in Matte Gunmetal for Vincent's R8!

19" SDC Forgestar F14s in Textured Black for a 370Z vs 21x10.5 M590s in Bespoke 1 Matte Black for a Cayenne

19" SDC Forgestar F14s in Textured Black for a 370Z vs 21x10.5 M590s in Bespoke 1 Matte Black for a Cayenne
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Today's update is about TPMS valve stems!
Many of our customers who pick up a set of Gunmetal or Black wheels want the entire setup to match, unfortunately almost all TPMS sensors come standard with silver valve stems.
This is no longer a problem as we just picked up Black and Gunmetal TPMS valve stems to use as full replacements for the standard silver ones!
This is a $50 upgrade that we have to purchase separately, so that we can offer it as an option on your wheel and tire package.
These are FULL metal replacement valve stems, that are anodized black and gunmetal.
Standard silver shown on left, Gunmetal in the middle, and black on the right.

Let me know if you are interested in a set for your next set of wheels!
Many of our customers who pick up a set of Gunmetal or Black wheels want the entire setup to match, unfortunately almost all TPMS sensors come standard with silver valve stems.
This is no longer a problem as we just picked up Black and Gunmetal TPMS valve stems to use as full replacements for the standard silver ones!
This is a $50 upgrade that we have to purchase separately, so that we can offer it as an option on your wheel and tire package.
These are FULL metal replacement valve stems, that are anodized black and gunmetal.
Standard silver shown on left, Gunmetal in the middle, and black on the right.

Let me know if you are interested in a set for your next set of wheels!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Heres a set of Forgestar CF5V in Bronze Burst for a 370Z, those are beefy 305/30 Michelin PSS for the rears!

Black Graphite Forgestar F14s in 20x9 20x9.5 for a Tesla Model S
Before Tires:

Mounted and Balanced with Hankook V12 Tires:

Set of 18x9.5 +40 TSW Nurburgrings in Matte Gunmetal with 255/40/18 Michelin PSS tires for a S4 track setup!


Finally, believe it or not Jeremy came by again yesterday for yet another set of wheels!
This time 20x10 M580s in Brushed Candy Red, insane!
Heres a teaser, more to come next week!


Now theres a color combo you probably haven't seen before!

Black Graphite Forgestar F14s in 20x9 20x9.5 for a Tesla Model S
Before Tires:

Mounted and Balanced with Hankook V12 Tires:

Set of 18x9.5 +40 TSW Nurburgrings in Matte Gunmetal with 255/40/18 Michelin PSS tires for a S4 track setup!


Finally, believe it or not Jeremy came by again yesterday for yet another set of wheels!
This time 20x10 M580s in Brushed Candy Red, insane!
Heres a teaser, more to come next week!


Now theres a color combo you probably haven't seen before!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
I was finally able to snap a nice photo that shows off the Bespoke 1 Matte Bronze Burst perfectly

Photos dont really do this finish justice, but I think this gets pretty close to showing how much metallic flake it has!
We just got most of our Bespoke Gloss and Matte Gunmetal orders back!
If you ordered a set, you'll probably see it in there

Photos dont really do this finish justice, but I think this gets pretty close to showing how much metallic flake it has!
We just got most of our Bespoke Gloss and Matte Gunmetal orders back!
If you ordered a set, you'll probably see it in there
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
A set of 19x8.5 Forgestar CF10s going out to an S4, as well as a set of CF5Vs, both in Matte Black.

Heres a set of Enkei RPF1s in the standard SBC finish for an Evo 10! Enkei carries only very limited quantities and fitments available in SBC.

Heres a set of Enkei RPF1s in the standard SBC finish for an Evo 10! Enkei carries only very limited quantities and fitments available in SBC.
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
This has to be one of my favorite sets that has come out of AG so far!
F520 with Brushed Antique Copper Centers
The finish is awesome and the Z pulls them off perfectly.






Here is the full article on Stance Nation!
F520 with Brushed Antique Copper Centers
The finish is awesome and the Z pulls them off perfectly.






Here is the full article on Stance Nation!
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Lots of forged fun today!
Heres an S Class with AG F431 with Brush Polished Brilliant Gold Centers! 20x10 Spec 1 Concave F, 20x12 Spec 2 Long Leg Concave R



And heres a set of F531 Spec 2 for a widebody Scion FR-S in full Gold Bullion

Your eyes aren't playing tricks on you, those are 10" rear lips! Fronts are 8"!

Words to describe this set escape me right now... except, maybe "WOW!"
AG wheels in a music video!

Finally, here are photos of AG's new Directional styles featuring Brush/Polished Faces!

From Left to Right: Design 11, Design 33, Design 21
What do you guys think?
Heres an S Class with AG F431 with Brush Polished Brilliant Gold Centers! 20x10 Spec 1 Concave F, 20x12 Spec 2 Long Leg Concave R



And heres a set of F531 Spec 2 for a widebody Scion FR-S in full Gold Bullion

Your eyes aren't playing tricks on you, those are 10" rear lips! Fronts are 8"!

Words to describe this set escape me right now... except, maybe "WOW!"
AG wheels in a music video!

Finally, here are photos of AG's new Directional styles featuring Brush/Polished Faces!

From Left to Right: Design 11, Design 33, Design 21
What do you guys think?
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA
Thread Starter
Vendor - Former Vendor
iTrader: (2)
Joined: Jan 2011
Posts: 2,460
Likes: 11
From: Santa Fe Springs, CA








































