Chrome 18's From Nissan
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Indianapolis
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Chrome 18's From Nissan
As of March 9th, 18" Chrome wheels are avaliable from the factory and from parts for the Z.
Front and rears are the same:
18x8
30mm offset
MSRP $1660
Features and Benefits:
"Squeeze Cast Technology" produces a finer wheel microstructure, which allows for a lighter
weight aluminum wheel with greater strength attributes than a conventional casting.
Nickel-chrome plating is utilized due to the squeeze cast wheel microstructure, which yields a
smoother chrome wheel surface and increased quality.
The chrome/squeeze cast wheel helps minimize chrome peeling associated with other chrome
plating processes.
Proprietary coatings are utilized on nickel-chrome plated surfaces to help fight corrosion in
harsh environments. The coatings are applied in the lug nut towers, bead seat/tire side,
center cap area, valve hole and brake side.
Nissan limited warranties apply.
Chrome center cap with Nissan emblem.
Chrome colored tire valve with chrome valve caps
included for vehicles without Tire Pressure
Monitoring System.
"Squeeze Cast Technology" produces a finer wheel microstructure, which allows for a lighter
weight aluminum wheel with greater strength attributes than a conventional casting.
Nickel-chrome plating is utilized due to the squeeze cast wheel microstructure, which yields a
smoother chrome wheel surface and increased quality.
The chrome/squeeze cast wheel helps minimize chrome peeling associated with other chrome
plating processes.
Proprietary coatings are utilized on nickel-chrome plated surfaces to help fight corrosion in
harsh environments. The coatings are applied in the lug nut towers, bead seat/tire side,
center cap area, valve hole and brake side.
Nissan limited warranties apply.
Chrome center cap with Nissan emblem.
Chrome colored tire valve with chrome valve caps
included for vehicles without Tire Pressure
Monitoring System.
18x8
30mm offset
MSRP $1660
#5
Registered User
Thread Starter
Join Date: Feb 2004
Location: Indianapolis
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
They must have been using an 03 to do test fitment or something. Probably an engineer's car or something. This is just the pic I took off of the bulliten we received from NNAnet.
Thread
Thread Starter
Forum
Replies
Last Post
Tonyz_2004_350z
South East Marketplace
1
10-04-2015 12:53 PM