FS: SSR Professor SP1 in SBC Finish 19x9/11
10-18-2012, 10:01 PM
#1
New Member
Thread Starter
iTrader: (7)
Join Date: Sep 2009
Location: F-DUB
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
SSR Professor SP1 in SBC Finish 19x9/11
I have a clean set of SSR Professor Sp1 in super black coat finish. This finish is $100 extra per wheel. Wheels have never been taken apart.
I had a tire pop on my rear wheel and so i rode on the inner barrel for like 10 feet when i was slowing down. The outer lip did not touch the ground due to my camber.
The other rear wheel fell over at Les Schwab and wobbled down. Both wheels can be easily repairable if wanted to be absolutely perfect.
Other than those imperfections, wheels were very well taken care of and are clean.
They are 19x9 +16 with about 3 inch lip and 19x11-19 with about 5.5 inches.
All wheels come with carbon fiber ssr center caps.
I have 225/35/19 Bridegstone Potenza's for the 9 inch wheel that have at least 70-75% left.
The tires on the 11 inch will be taken off before sale.
Lug pattern is 5x114.3.
Asking price is $2600+shipping
Wheels are located in Seattle area.
Willing to trade for some dish wheels with negative offset.
Here is the inner lip that was driven on for a few feet.
Here is the outer lip on the other wheel that fell over.
I had a tire pop on my rear wheel and so i rode on the inner barrel for like 10 feet when i was slowing down. The outer lip did not touch the ground due to my camber.
The other rear wheel fell over at Les Schwab and wobbled down. Both wheels can be easily repairable if wanted to be absolutely perfect.
Other than those imperfections, wheels were very well taken care of and are clean.
They are 19x9 +16 with about 3 inch lip and 19x11-19 with about 5.5 inches.
All wheels come with carbon fiber ssr center caps.
I have 225/35/19 Bridegstone Potenza's for the 9 inch wheel that have at least 70-75% left.
The tires on the 11 inch will be taken off before sale.
Lug pattern is 5x114.3.
Asking price is $2600+shipping
Wheels are located in Seattle area.
Willing to trade for some dish wheels with negative offset.
Here is the inner lip that was driven on for a few feet.
Here is the outer lip on the other wheel that fell over.
10-19-2012, 06:21 AM
#2
Registered User
iTrader: (11)
Join Date: Apr 2008
Location: Texas, Mass, Florida
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
hey..i want your rear wheels...mine are only 19x10.5 +5 but I would rather put them on my fronts and run your rears on my G...if anyone wants my fronts 19x9.5 +5, hit me up and maybe we can figure out something...i have the same finish too...
Trending Topics
10-24-2012, 08:52 PM
#18
Registered User
iTrader: (11)
Join Date: Apr 2008
Location: Texas, Mass, Florida
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
i'm gonna try to do the test fit of my wheels on my boy's car this week...if all goes well, i'll take these off your hands...i hope i can use my 255/35/19 Hankook V12 tires on the rears...i'm gonna need to buy a rear camber kit too...I wonder if stretching a 235/35 on a 19x10.5 be too much of a stretch...i have Yoko S-drives for my front tires...
