Notices

DIY: 06+ Base with Cruise Control using Uprev + OEM Parts

Thread Tools
 
Search this Thread
 
Old 10-28-2012, 08:30 AM
  #121  
kramykram
Registered User
iTrader: (135)
 
kramykram's Avatar
 
Join Date: Sep 2006
Location: biloxi,mississippi
Posts: 5,695
Likes: 0
Received 0 Likes on 0 Posts
Default

Well looks like i am going to take the cruise control plunge now as well. just trying to find the cruise panel instead of a whole wheel. but either way. tried to email uprev but gave me an error. hopefully shouldt take long to get the parts in.
Old 10-28-2012, 12:28 PM
  #122  
The_Laughing_Man
New Member
iTrader: (1)
 
The_Laughing_Man's Avatar
 
Join Date: Sep 2010
Location: N/A
Posts: 558
Received 9 Likes on 9 Posts
Default

Originally Posted by kramykram
Well looks like i am going to take the cruise control plunge now as well. just trying to find the cruise panel instead of a whole wheel. but either way. tried to email uprev but gave me an error. hopefully shouldt take long to get the parts in.
You should just call. I emailed with no reply as well but there was always some one by the phone.
Old 10-29-2012, 03:16 PM
  #123  
ian99rt
Registered User
Thread Starter
iTrader: (12)
 
ian99rt's Avatar
 
Join Date: Nov 2010
Location: Naples, FL
Posts: 704
Received 12 Likes on 9 Posts
Default

As of the last time o checked uprev themselves were not up to date on adding cruise. I would siggest vince at RT tuning who can set you up with all the uprev setup.

E30cabrio used a different tuner who can help as well.
Old 10-29-2012, 03:51 PM
  #124  
e30cabrio
350Z-holic
iTrader: (30)
 
e30cabrio's Avatar
 
Join Date: May 2010
Location: Hear
Posts: 45,181
Received 2,578 Likes on 2,037 Posts
Default

Xact Dyno in Tempe Az is where I went. Tim said he will do just CC for a reasonable price.
Old 11-04-2012, 07:11 AM
  #125  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

Can this work on a 03 base model?
Old 11-04-2012, 07:22 AM
  #126  
ian99rt
Registered User
Thread Starter
iTrader: (12)
 
ian99rt's Avatar
 
Join Date: Nov 2010
Location: Naples, FL
Posts: 704
Received 12 Likes on 9 Posts
Default

Originally Posted by Escobar
Can this work on a 03 base model?
I believe a few folks in this thread have gotten earlier than 06 years working as well but I am not familiar with those years wiring and interfacing.
Old 11-04-2012, 08:19 AM
  #127  
The_Laughing_Man
New Member
iTrader: (1)
 
The_Laughing_Man's Avatar
 
Join Date: Sep 2010
Location: N/A
Posts: 558
Received 9 Likes on 9 Posts
Default

Originally Posted by Escobar
Can this work on a 03 base model?
If an '05 can do it I'm sure a '03 can.
Old 11-04-2012, 08:39 AM
  #128  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

Yea i really want to get this working so i can switch maps. I guess i will be the guinnea pig haha
Old 11-04-2012, 08:42 AM
  #129  
The_Laughing_Man
New Member
iTrader: (1)
 
The_Laughing_Man's Avatar
 
Join Date: Sep 2010
Location: N/A
Posts: 558
Received 9 Likes on 9 Posts
Default

Originally Posted by Escobar
Yea i really want to get this working so i can switch maps. I guess i will be the guinnea pig haha
If you have any questions definitely ask here or PM me. I just did my '05 a few months ago and it has to be identical. Buy the steering/pedal controls, install them, talk to a tuner.
Old 11-04-2012, 10:44 AM
  #130  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

Originally Posted by The_Laughing_Man
If you have any questions definitely ask here or PM me. I just did my '05 a few months ago and it has to be identical. Buy the steering/pedal controls, install them, talk to a tuner.
yea, thats my plan. I'll shoot you a pm if I have any problems. thanks
Old 11-06-2012, 06:50 AM
  #131  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

These are the part numbers for the 03 I just got. 25300-4M400. 25300-62JOE

Last edited by Escobar; 11-08-2012 at 07:28 AM.
Old 11-16-2012, 04:40 PM
  #132  
ChadsZ
Registered User
 
ChadsZ's Avatar
 
Join Date: Nov 2012
Location: Norman, OK
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Please help. I have the 2003 base model with a 2,000 mile round trip next week. I have already installed the pedal switches as well as the controls on the steering wheel. Previously to buying these items I called the local dealership and explained my goal (cruise control) and asked them if they would be capable of the re-flash for cruise. They said it wouldn't be a problem and quoted me $100. I took it in today only to get disappointed. The technician said that his only option was to add the code that the other models have already for cruise but this code also consists of ABS and traction control. The technician said that he didn't know what would happen and that it could possibly fry it.

I am very unfamiliar with ECU's, need some insight.
Will it fry it?
Will it work?
Am I required to have some performance upgrade for this to be possible? If so then why?
Old 11-16-2012, 04:49 PM
  #133  
e30cabrio
350Z-holic
iTrader: (30)
 
e30cabrio's Avatar
 
Join Date: May 2010
Location: Hear
Posts: 45,181
Received 2,578 Likes on 2,037 Posts
Default

I can't say anything about Nissan doing a flash but on my car cal file cf41e gave my ecu cruise and did not change anything else.

Contact UPREV ask for a tuner in your area and ask if he will flash your ecu to just that with no tune. My tuner said he would for a reasonable price, he did it free on my already tuned car. It took longer to bring his laptop to my car than to flash it.
Old 11-16-2012, 07:30 PM
  #134  
The_Laughing_Man
New Member
iTrader: (1)
 
The_Laughing_Man's Avatar
 
Join Date: Sep 2010
Location: N/A
Posts: 558
Received 9 Likes on 9 Posts
Default

Originally Posted by ChadsZ
Please help. I have the 2003 base model with a 2,000 mile round trip next week. I have already installed the pedal switches as well as the controls on the steering wheel. Previously to buying these items I called the local dealership and explained my goal (cruise control) and asked them if they would be capable of the re-flash for cruise. They said it wouldn't be a problem and quoted me $100. I took it in today only to get disappointed. The technician said that his only option was to add the code that the other models have already for cruise but this code also consists of ABS and traction control. The technician said that he didn't know what would happen and that it could possibly fry it.

I am very unfamiliar with ECU's, need some insight.
Will it fry it?
Will it work?
Am I required to have some performance upgrade for this to be possible? If so then why?
Are there any tuners in your area? I guess since your trip is next week you dont really have the option to send your ECU off to UPREV. You should call any shops around you that can tune with UPREV (or any tuning for Nissan seeing as you're not getting an actual tune), they should know what you're talking about.

I wouldn't risk some Nissan technician screwing around with your ECU like that. You could end up not only having no cruise control, but no car to take on your trip as well.
Old 11-17-2012, 08:05 AM
  #135  
ChadsZ
Registered User
 
ChadsZ's Avatar
 
Join Date: Nov 2012
Location: Norman, OK
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks but there was only one tuner that I could find and he said that he couldn't do it. He also said that he didn't know of any other tuner in the state (OK) that would be capable. That is why I resorted to the dealership who told me that it wouldn't be a problem. Now I have fo cruise control since the dealership is unsure of their capabilities. I will contact UpRev directly, as suggested, Monday to see if there is some one nearby that i have missed, their tuner map says that the closest is in Texas and I do not have time for that. Until then I was wondering if anyone had any knowledge of the outcome of the dealership attempting the flash.
Old 11-17-2012, 08:21 AM
  #136  
e30cabrio
350Z-holic
iTrader: (30)
 
e30cabrio's Avatar
 
Join Date: May 2010
Location: Hear
Posts: 45,181
Received 2,578 Likes on 2,037 Posts
Default

I'd avoid the dealer unless unavoidable.

If he has the cable he has the ability to do it. maybe tell him to contact UPREV? My tuner told them what we did and they were happy about it.

If not find a tuner on your route?
Old 11-19-2012, 10:53 AM
  #137  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

I just wanted to report that this DOES work with a 2003 base. I just confirmed that. Thanks guys!
Old 11-19-2012, 11:08 AM
  #138  
ian99rt
Registered User
Thread Starter
iTrader: (12)
 
ian99rt's Avatar
 
Join Date: Nov 2010
Location: Naples, FL
Posts: 704
Received 12 Likes on 9 Posts
Default

Originally Posted by Escobar
I just wanted to report that this DOES work with a 2003 base. I just confirmed that. Thanks guys!
Rock on!
Old 11-19-2012, 03:48 PM
  #139  
The_Laughing_Man
New Member
iTrader: (1)
 
The_Laughing_Man's Avatar
 
Join Date: Sep 2010
Location: N/A
Posts: 558
Received 9 Likes on 9 Posts
Default

Originally Posted by Escobar
I just wanted to report that this DOES work with a 2003 base. I just confirmed that. Thanks guys!
Old 11-20-2012, 05:01 PM
  #140  
Escobar
New Member
iTrader: (27)
 
Escobar's Avatar
 
Join Date: Jul 2005
Location: £ã§† CØç† œ
Posts: 3,505
Received 149 Likes on 123 Posts
Default

Originally Posted by ian99rt
Rock on!
Originally Posted by The_Laughing_Man
thanks for the help.


Quick Reply: DIY: 06+ Base with Cruise Control using Uprev + OEM Parts



All times are GMT -8. The time now is 09:36 AM.